First implementation with Linux display manager.
- Add single-threaded mode for EditorResourcePreview (needed for OpenGL).
Co-authored-by: clayjohn <claynjohn@gmail.com>
Co-authored-by: Fabio Alessandrelli <fabio.alessandrelli@gmail.com>
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
That removal was correct, but triggered a bug in our messy-as-heck main.cpp
detection logic for editor/project manager/project/command line tool...
Fixing this is for another day.
This gives visual feedback when not starting Godot from a terminal.
This could lead to confusion when placing a Godot binary within a
project folder that has no main scene defined.
Three attack points, all after the regular calculations:
1. Prevent negative physics timestep counts. They could occur if
physics_jtter_fix is changed at runtime.
2. idle_step is not allowed to go below 1/8th of the input step.
That could happen on physics_jitter_fix changes or heavily
fluctuating performance.
3. Prevent that the idle_step modification breaks the promise
that Engine.get_physics_interpolation_fraction() is between
0 and 1 by doing more physics steps than the base system wants.
Fixes#26887
Co-authored-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Allow starting the editor debugger server for the given protocol (and
optionally bound to the given ip/port combination:
godot -e --debug-server tcp://*:8080
If enabled, key/touch/joystick events will be flushed just before every idle and physics frame.
Enabling this can greatly improve the responsiveness to input, specially in devices that need to run multiple physics frames per each idle frame, because of not being powerful enough to run at the target frame rate.
This will only work for platforms using input buffering (regardless event accumulation). Currenly, only Android does so, but could be implemented for iOS in an upcoming PR.
Input buffering is implicitly used by event accumulation, but this commit makes it more generic so it can be enabled for other uses.
For desktop OSs it's currently not feasible given main and UI threads are the same).
* Only apply final actions to attachments used in the last pass.
* Fixes to draw list final action (was using continue instead of read/drop).
* Profiling regions inside draw lists now properly throw errors.
* Ability to enable gpu profile printing from project settings. (used to debug).
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
There are many issues with using multiple windows by default:
- Taking screenshots of a specific window will not capture subwindows.
This also applies when recording a video using tools such as OBS.
- Subwindows may not behave correctly when fullscreen mode is enabled,
especially if exclusive fullscreen is implemented in the future
to decrease input lag on Windows.
"Subwindows" is quite general here, and also refers to dropdown menus
(e.g. those spawned by OptionButton) and Control tooltips.
Therefore, it's safer to embed subwindows by default in projects.
Multi-window mode remains the default in the editor.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
This makes Godot avoid distortion when resizing the window to an aspect
ratio that doesn't match the project's base aspect ratio.
Since this setting has no effect when the stretch mode is `disabled`
(the default), this won't impact projects not using the `canvas_items`
or `viewport` stretch modes.
WARNING: Hacks everywhere!
The logic in `main.cpp` is due a full rewrite as it's extremely hacky,
splitting argument parsing over several functions, with a mess of global state
and assumptions about what combinations of arguments or lack thereof should
mean in terms of what we want to read: game, editor, project manager, or
command line tools such as `--doctool`, `--export` or `--script`.
Until this is fully rewritten, this patch hacks things some more to ensure
that we don't fall back to the project manager in cases where it's not
warranted, and especially not *too late*, as it can mean that we haven't
properly initialized stuff like `EditorPaths` needed by the PM (which in turn
impacts what kind of path will be used for logs and the shader cache, etc...
the rabbit hole goes deep).
Fixes#41435.
Fixes#49392.
Fixes#49658.
Fixes https://github.com/godotengine/godot/issues/38202#issuecomment-773158477.
- EditorSettings: Ensure that `create()` makes a valid singleton.
Fixes#49179, fixes#49450.
- EditorPaths: Cleanup code, properly set `paths_valid`.
- EditorPaths: Move more paths validation (check, mkdir) from
EditorSettings for a better separation of concerns.
- EditorPaths: Move EditorFileSystem creation of `.godot/imported`
next to other paths.
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
- Display the frame time in addition to FPS.
- Frame time is a more objective measurement in comparison to FPS,
but FPS is more familiar to people less acquainted with profiling.
- Rename "Game" to "Project" for the project FPS printing line.
This adds the ability to add overrides for built-in actions (i.e. ui_*) in the editor. Also added a number of additional built-in actions for various text-related actions, gui-generic actions (like copy and paste) and graph-related actions (duplicate nodes), etc. Moved the definition of input actions to input_map, rather than in project_settings so the editor can make use of these actions as well.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
In addition, add support for scaling and applying filter to the splash screen on Android.
One limitation of the api being used is that the splash screen aspect ratio is not maintained when it's scaled up.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
This ensures that settings like `gui/theme/custom_font` handle resource
remappings properly, as they load resources in `register_scene_types()`.
Path remaps used to be done before loading scene types in early Godot
versions (as hinted by the "Load Remaps" comment just before "Load Scene
Types") but this was broken when developing new localization features.
Fixes#17640.
Which can be used by language bindings to generate code statically. This
is generated as a different file from the class API because it has
different requirements (the builtin types have constructors and don't
have signals), so bindings can better make use of each JSON file without
extra parsing.
This also cleans up a bit the old API generator, mainly initializing
structs and renaming "instanciable" to the more correct "instantiable".
The argument description in help text was updated to better reflect how
it should be used. The <path> argument is mandatory.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
When a project setting is not found, a warning message is printed.
This moves the default value declaration so it can be found when
the `--help` or `--version` command line arguments are used.
Export presets contains the export_path option, to specify the default
export location, but the CLI export option disregarded that, and always
required and export path to be specified.
After this commit, if the export path is not specified in the command,
the one in the preset will be used, erroring only if it's not present or
invalid.
New corporate sponsors:
Spiffcode (Platinum)
ASIFA-Hollywood (Silver)
Zenva Academy (Silver)
Thanks to all contributors and donors for making Godot possible!
They're now disabled by default, and can be enabled with the command line
argument `--vk-layers`.
When enabled, the errors about them being missing are now warnings, as
users were confused and thought this meant Vulkan is broken for them.
Fix crash in `~VulkanContext` when validation layers are disabled (exposed by
this PR since before they could not be disabled without source modification).
Also moved VulkanContext member initializations to header.
Fixes#37102.
It was added in 3e20391bf6 but it doesn't seem
particularly useful, and it was only implemented for the custom splash branch
and not the default one, so it could return an uninitialized int.
The thread model option for physics (2D) and rendering (single-unsafe,
single-safe, multithread), was causing crashes/locks when set as
multithreaded and exported for a platform that does not support threads
(namely HTML5).
This commit ensures that when threads support is not available, that
option is ignored, and the equivalent of "single-unsafe" is always used
instead.
Extracted the most minimal core initialization functionality from
`setup()` and `setup2()` so that `ClassDB` could be tested properly
(input, audio, rendering, physics etc, are excluded).
Display and rendering servers/singletons are not initialized at all.
Due to the fact that most subsystems are disabled, fixed various crashes in the
process (in order):
- `AcceptDialog` OK/cancel swap behavior (used `DisplayServer` while
`register_scene_types()`);
- `make_default_theme` which depends on `RenderingServer`;
- `XRServer` singleton access while calling `register_modules_types()`;
- hidden bug in a way joypads are cleaned up (MacOS and Linux only).
Removed manual `ClassDB` init/cleanup calls from `test_validate_testing.h`.
ClassDB tests:
Co-authored-by: Ignacio Etcheverry <ignalfonsore@gmail.com>
This code currently isn't compiled (and cannot compile).
We plan to re-add OpenGL ES-based renderer(s) in Godot 4.0 alongside Vulkan
(probably ES 3.0, possibly also a low-end ES 2.0), but the code will be quite
different so it's not relevant to keep this old Godot 3.2 code.
The `drivers/gles2` code from the `3.2` branch can be used as a reference for
a potential new implementation.
`application/run/main_loop_type` setting can handle custom global
classes (`class_name`). For instance: `MySceneTree`.
The setting's default is changed from empty to `SceneTree` as to give
some hint of what kind of input is accepted for the main loop type.
Do not prematurely parse anything which beings with `--test`
to run doctest. This allows other commands to be run, such as
`--test-gdscript` or other custom arguments.
A new `env.Run` method is added which allows to control the verbosity
of builders output automatically depending on whether the "verbose"
option is set. It also allows to optionally run any SCons commands in a
subprocess using the existing `run_in_subprocess` method, unifying
the interface. `Action` objects wrap all builder functions to include a
short build message associated with any action.
Notably, this removes quite verbose output generated by `make_doc_header`
and `make_editor_icons_action` builders.
Allows switching `tests=yes`/`no` and rebuilding only tests and main,
instead of the whole engine.
Co-authored-by: Andrii Doroshenko (Xrayez) <xrayez@gmail.com>
Implements exit codes into the engine so tests can return their statuses.
Ideally we don't do this, and we use FIXUP logic to 'begin' and 'end' the engine execution for tests specifically.
Since realistically we're initialising the engine here we don't want to do that, since String should not require an engine startup to test a single header.
This lowers the complexity of running the unit tests and even for
physics should be possible to implement such a fix.
Sometimes to fix something you have to break it first.
This get GDScript mostly working with the new tokenizer and parser but
a lot of things isn't working yet. It compiles and it's usable, and that
should be enough for now.
Don't worry: other huge commits will come after this.
Due to `user://` returning the current working directory when no
project is open, this caused logs to be written to `$HOME`
most of the time.
This closes#40305.
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
So places that need to look into it can use the list instead of parsing
ProjectSettings details (like checking "*" in path for testing if it's
singleton).
Custom monitors can be added/removed/checked using `Performance.add_custom_monitor`/`Performance.remove_custom_monitor`/`Performance.has_custom_monitor`
The value can be viewed in the `Monitor` tab of Debugger.
Text before `/` is used to categorize the custom monitor.
`EditorPerformanceProfiler` class is created to separate logic from `ScriptEditorDebugger`
User can click on the graph of monitors to read the value at that point.
Graph includes intermediate base lines.
Since projects started from the editor or exported in debug mode
run slower than those exported in release mode, this should be
clearly presented to the user.
This partially addresses #20219.
The Low Processor Usage Mode Sleep Usec setting is now used as a
FPS limiter rather than a constant sleep duration.
This will increase CPU/GPU usage slightly due to the higher
effective FPS, but the increase in overall smoothness is worth it.
If both Force Fps and Low Processor Usage Mode settings are enabled
in the project settings, only the setting that causes the highest
sleep duration will be retained.
This closes#11030.
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
This patch adds ability to include external, user-defined C++ modules
to be compiled as part of Godot via `custom_modules` build option
which can be passed to `scons`.
```
scons platform=x11 tools=yes custom_modules="../project/modules"
```
Features:
- detects all available modules under `custom_modules` directory the
same way as it does for built-in modules (not recursive);
- works with both relative and absolute paths on the filesystem;
- multiple search paths can be specified as a comma-separated list.
Module custom documentation and editor icons collection and generation
process is adapted to work with absolute paths needed by such modules.
Also fixed doctool bug mixing absolute and relative paths respectively.
Implementation details:
- `env.module_list` is a dictionary now, which holds both module name as
key and either a relative or absolute path to a module as a value.
- `methods.detect_modules` is run twice: once for built-in modules, and
second for external modules, all combined later.
- `methods.detect_modules` was not doing what it says on the tin. It is
split into `detect_modules` which collects a list of available modules
and `write_modules` which generates `register_types` sources for each.
- whether a module is built-in or external is distinguished by relative
or absolute paths respectively. `custom_modules` scons converter
ensures that the path is absolute even if relative path is supplied,
including expanding user paths and symbolic links.
- treats the parent directory as if it was Godot's base directory, so
that there's no need to change include paths in cases where custom
modules are included as dependencies in other modules.
Previously the editor would ignore the 'single_window_mode' editor setting if
the edited project didn't have a main scene configured in the project settings.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
This doesn't make much sense API-wise, but it's important for the documentation
workflow that the Mono and non-Mono builds produce the same output, otherwise
we keep having non-Mono builds removing Mono properties and losing their
descriptions.
This is a terrible hack but it's ad hoc, and should be OK for the time being.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
- Travis: Change x11 to linuxbsd
- SCons: Change x11 plataform to linuxbsd
- Plugins: Remove ; to avoid fallthrough warning
- DisplayServerX11: Implement set_icon
- DisplayServerX11: Fix X11 bug when a window was erased from windows
map, all the changes from that erased windows are sending to the main
window
- DisplayServerX11: Reorder create_window commands
- DisplayServerX11: Change every Size2 to Size2i and Rect2 to Rect2i
where it belongs
+ More X11 fixes which have been integrated directly back into reduz's
original commits while rebasing the branch.
Now that the unused DocDump was removed, the `editor/doc` subfolder is
redundant.
Similarly, there's no reason for Collada to have a subfolder for itself
when glTF or OBJ don't.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
This should speed up rendering slightly. While the project manager
is hardly demanding, this may help on high refresh-rate displays
or very slow machines.
This is needed as C# may free resources from the finalizer thread during
CSharpLanguage::finish(). Previously this would result in RIDs not being freed.
This option is meant to use together with `--path` or from a project
folder. Otherwise the project manager is opened and the option triggers
a crash.
Fixes#25589.
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
We were overriding values from `gamecontrollerdb.txt` (current, updated
upstream) with `gamecontrollerdb_205.txt` (legacy, SDL 2.0.5) and then
`gamecontrollerdb_204.txt` (legacy, SDL 2.0.4).
There was a comment to warn about this but it seems it did not prevent
using the wrong order for all this time...
Now `gamecontrollerdb.txt` mappings will properly override outdated
ones present in the `204` and `205` variants.
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
It was previously mentioning only one of the two required arguments.
This also mentions that the export path is relative to the project
directory.
This partially addresses #28646.
New contributors added to AUTHORS:
@allkhor, @Eoin-ONeill-Yokai, @timothyqiu, @madmiraal, @zaksnet
Update sponsors on splash screen.
Thanks to all contributors and donors for making Godot possible!
On iOS devices without a physical home button iOS
shows a home indicator instead. This is often in the
way of the UI or the game.
Added a project setting to disable hidden home indicator.
The default value is to hide the home indicator
This change allows error messages to be printed in the editor debugger when the game fails on load, instead of displaying them in the console terminal only.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
New contributors added to AUTHORS:
@creikey, @IronicallySerious, @LikeLakers2, @minraws, @NilsIrl,
@profan, @raphael10241024
New Platinum sponsor, added to splash screen:
Heroic Labs
Merged some duplicates via .mailmap to allow better tracking of
commit counts with `git shortlog -s -n -e --no-merges`.
Thanks to all contributors and donors for making Godot possible!
connect_to_stream now accepts optional parameter to specify which
certificates to trust.
Implement accept_stream (SSL server) with key/cert parameters to specify
the RSA key and X509 certificate resources.
This reproduces the behavior used for printing when using the remote
debugger. The default limit is 100 errors and 100 warnings per second,
which makes it possible to display much more GDScript warnings
before overflowing.
This also adds a "Too many warnings" message, so that warnings
don't look like errors when overflowing anymore.
This closes#21896.
Also added support for SCons project-absolute paths (starting with #) and
warning about duplicates in add_source_files(), and fixed
default_controller_mappings.gen.cpp being included twice after first build
due to *.cpp globbing.
Part of #30270.
Addresses #30068
This is a prerequisite for allowing proper support for fixed timestep interpolation, exposing the interpolation fraction to the engine, modules and gdscript.
The interpolation fraction is the fraction through the current physics tick at the time of the current frame.
This is an editor setting and its value can also be toggled
using an entry in the Editor toolbar. The console will still
appear briefly when starting the project manager or editor,
as it's still compiled as console application.
Does not impact exported games, which will still run without
console in release and with console in debug mode.
A project setting or export option could be added to disable
it in debug mode if there's demand for it, but that would
greatly reduce the usefulness of debug builds if Windows users
can no longer report error and crash messages.
Fixes#17889.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
This can help to solve compilation issues on systems with Japanese
locale with encodings like Shift_JIS and UTF-8-BOM.
Also be more consistent using String::utf8() to represent cyrilic
unicode characters in test_string.cpp
Clarified some comments in test_string.cpp for some Unicode characters.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
Due to the high number of commits in the Godot repository,
7-character hashes were starting to become occasionally ambiguous.
In contrast, 9-character hashes are currently unambiguous for
all commits.
Also include website URL and make it configurable via version.py
together with the rest of the engine branding.
Add mention to MIT license in --help output.
On high-refresh rate displays, the old default value (8000) effectively
limited redrawing to 125 FPS, no matter whether V-Sync was enabled
or not. The new value limits redrawing to a value slightly above
144 FPS, decreasing input lag and making the editor feel smoother
when using freelook.
60 Hz displays aren't affected by this change when V-Sync is enabled,
since V-Sync will take care of limiting redrawing to 60 FPS.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
The binary search algorithm used to lookup character codes in the table
relies that the data must be ordered. This fixes `to_lower()` string
method to convert upper case to lower case properly, so that the
algorithm doesn't terminate prematurely.
Co-authored-by: AndreevAndrei (avandrei) <avandrei@MacBookAAV.local>
Acknowledge mouse button events as position tellers (to make picking more solid; for instance, the touch mouse is raised with a mouse unpressed event that may have a more current position)
Forget mouse position for physics if touch mouse raised (because the position known as last is no longer meaningful)
Remove needless check for mouse over/exit (now there's code to inject an spurious move for cases where camera/objects have moved)
Restrict 2D mouse over/exit to mouse events (including emulated from touch; true touches shouldn't trigger the signals)
Fixes#26460.
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
They had been reserved for future implementation, but we now have the
`match` CF keyword which does the same and more.
According to @reduz `do` was even added by mistake when copying from
the shader language parser, it was never intended to add support for
`do`... `while` loops, as the syntax would be awkward in GDScript,
and the added sugar is not worth it.
Fixes#25787.
This allows most demos to run without any ubsan or asan errors. There
are still some things in thirdpart/ and some things in AudioServer that
needs a look but this fixes a lot of issues. This should help debug less
obvious issues, hopefully.
This fixes#25217 and fixes#25218
It has a big impact on 2D and text rendering performance (cf. #24466)
so the solution seems worse than the bug it aims to work around.
It's now opt-in via "rendering/quality/2d/gles2_use_nvidia_rect_flicker_workaround"
for those who need it and have a simple enough game for the performance
drop not to be an issue.
Fixes#24466.
Background: lstrip and rstrip were broken by changes to String in:
0e29f7974b
which removed it's access to Vector::find(CharType).
Moved Vector's find up into CowData so it can be shared by Vector and String.
Added String::find_char using CowData::find.
Implemented rstrip and lstrip using find_char.
Added a few tests for String rstrip and lstrip.
As per the C++ standard 21.3.4.1 for std::string:
Returns: If pos < size(), returns data()[pos]. Otherwise, if pos ==
size(), the const version returns charT(). Otherwise, the behavior is
undefined.
Since the behavior is undefined Godot now does the same thing for const
and non-const versions of operator[].
This fixes#21242 and fixes#22221.
Fixes the following warnings in `p=server target=release_debug` builds
on Travis CI:
```
./core/os/memory.h: In function 'MainLoop* TestOAHashMap::test()':
./core/os/memory.h:108:111: warning: 'dummy' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define memnew_placement(m_placement, m_class) _post_initialize(new (m_placement, sizeof(m_class), "") m_class)
^
main/tests/test_oa_hash_map.cpp:98:7: note: 'dummy' was declared here
int dummy;
^
scene/resources/bit_mask.cpp:447:3: warning: 'next_i' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/resources/bit_mask.cpp:448:4: warning: 'next_j' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
This should eventually be rewritten to properly test IO features,
but this would be part of a bigger work on adding a proper testing
framework for Godot features.
Fixes#2454.
Previously, an error message would get printed to the console, but this
is problematic in e.g. Windows where a console is not displayed. In the
case of a missing .pck file, the binary would just silently fail. Now,
it shows an alert.
Fixes#21994.
Following the universal input handling effort, this works the same for every platform, as long as the touch move event coming from it contains the relative movement.
The same tracking algorithm used to track the mouse speed is used here, but tracking separately each touch index.
Fixes#3623.
* There were spaces unequally inside the function definitions.
* camelcase_to_underscore() should also work for numbers inside of the camel case.
* Removed the builtin concept
* Capitalize descriptions from methods too.
* Match the visual script functions by removing the empty arguments "( )"
* Add some test cases
Hugo Locurcio
lawnjelly
Rémi Verschelde
Pawel Lampe
Rémi Verschelde
Bastiaan Olij
Aaron Franke
bruvzg
Paulb23
Jacob Edie
Juan Linietsky
Manuel Moos
Wilson E. Alvarez
Fabio Alessandrelli
Lyuma
Michael Alexsander
Anilforextra
Pedro J. Estébanez
Hendrik Brucker
Lightning_A
totlmstr
George Marques
Anshul7sp1
Johannes
Mateo Kuruk Miccino
Emmanuel Leblond
Andrii Doroshenko (Xrayez)
Eric M
Fredia Huya-Kouadio
Marcel Admiraal
Thakee Nathees
Jordan Schidlowsky
Sergey Minakov
Gordon MacPherson
PouleyKetchoupp
Stijn Hinlopen
simpu
Ev1lbl0w
Andrea Catania
Ignacio Etcheverry
Marcus Elg
Dominik 'dreamsComeTrue' Jasiński
lupoDharkael
Juan Linietsky
Yuri Roubinsky
Haoyu Qiu
Jonas Bernemann
TerminalJack
Rafał Mikrut
Erik
Shiqing
iwek7
Robin Hübner
volzhs
Emmanuel Barroga
IAmActuallyCthulhu
Guilherme Felipe
Tomasz Chabora
Bojidar Marinov
Nils ANDRÉ-CHANG
Luka Dornhecker
Ryan Stein
Daw11
Anish Bhobe
Andrettin
marxin
Hein-Pieter van Braam
Ibrahn Sahir
Timo Schwarzer
Marc Gilleron
Fabian
Davide Baldo
Simon Wenner
Superwaitsum
Max Hilbrunner
Zaven Muradyan
K. S. Ernest (iFire) Lee