Each driver used to define the (same) project settings values
`audio/mix_rate` and `audio/output_latency`, but the setting names are
not driver specific.
Overriding is still possible via platform tags.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
The previous logic used the 'tools' directory within the Android sdk to validate it. That directory was recently deprecated and removed from the Android sdk folder (https://developer.android.com/studio/releases/sdk-tools)
The issue was caused by PR #36906 which changes prevented the generated shared libraries from being stripped.
Since the change is only needed for development (debugging) purposes, it's commented out by default.
With the NDK installed locally, gradle plugin 3.6.0 seems to enforce
a specific older NDK version, and will fail building if you don't have
it installed with:
```
No version of NDK matched the requested version 20.0.5594570.
Versions available locally: 21.0.6113669
```
Upstream issue: https://github.com/gradle/gradle/issues/12440
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
- update gradle plugins versions
- add formatting rules for AndroidManifest and gradle build files
- cleanup java_godot_lib_jni
Note: logic was mostly moved around and no new logic/functionality was added.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Calling `step()` on EditorProgress too often will slow down the
rest of the editor, so it's best avoided. This is also more consistent
with other exporters, as most of them don't report per-file progress
either.
Exporting a 2D project with ~1,100 files to Android now takes
about 10 seconds from a debug editor build instead of 65 seconds.
This closes#30850.
Changed the condition to add a length filter to make it consistent with the documentation (0 means no character limit). Otherwise the default value in LineEdit causes the virtual keyboard to be non-fonctional on Android.
Reverts the following commits:
- c81ec6f26d40b70283958a4ef3e216fb32cbaf14:
"Exposes capture methods to AudioServer, variable renames for
consistency, added documentation."
- 47c558b98abf842910c780294314326662410cdf:
"Expose audio callbacks as signals."
- dabaa11b3c451e9b8f2cca7e563bd9ec51edb169:
"Fix to make sure the capture buffers are deallocated at shutdown.
Silences warnings."
Some documentation improvements were kept for pre-existing methods.
See rationale for reverting these changes in #30468.
- `EditorNavigationMeshGenerator` was being registered as part of the Core API,
even after d3f48f88bb. We must make sure to
set Editor as the current ClassDB API type before creating an instance.
- The `VisualScriptEngineSingleton.constant` property has a property hint string
that's different between tools and non-tools builds. This commit makes the
hint string to no longer be set in `_bind_methods`, and to instead set it in
`_validate_property`. This way it's ignored when calculating the API hash.
- `JavaClassWrapper` is now registered in ClassDB on all platforms,
using a dummy implementation on platforms other than Android.
This fixes API portability between Android and other platforms.
- Updated `--class-db-json` command to ignore non-virtual methods that start
with an underscore (see: 4be87c6016).
- Go up was not working, simplify was used one time too much
- Added GestureHandler
- Added doubleTap to recognize open dir
- Fixed scroll where sometimes the scroll jumped between start and end when pointer was outside or on the edge of the scroll area
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Provides access to a MulticastLock.
As specified by the Android API, broadcast/multicast packets may be
filtered on some phones unless the application explicitly acquires
a "MulticastLock".
The description appears when hovering over the one-click-deploy button (top-right). This information helps the user distinguish between their devices if multiple are connected or if the same device is connected by both usb and tcpip (two entries in the list for the same device).
Avoid using adb reverse if deploying with adb tcpip.
This still can fail if the user is attempting to debug over usb and has connected their device over BOTH usb and tcpip. I'm not sure how we would detect that problem in advance though.
A better fix would be to make Godot's export code properly parse the
tag over multiple lines (and maybe even use XMLParser instead of doing
it ad-hoc?).
As for the APK names, we could alternatively pick the first .apk found
in the `debug` and `release` folders without expecting a specific name.
Fixes#32414.
Example: To generate for the `release` build target and for the `armv7`, `arm64v8` and `x86` architectures, run the commands:
```
cd godot
scons -j4 platform=android target=release android_arch=armv7
scons -j4 platform=android target=release android_arch=arm64v8
scons -j4 platform=android target=release android_arch=x86
cd platform/android/java
./gradlew generateGodotTemplates
```
Notes:
- The generated build templates will be located in the `godot/bin` directory (i.e: `android_debug.apk`, `android_release.apk`, `android_source.zip`).
- The gradle command will only generate templates for the target(s) with available native shared libraries. For example, running the commands above will only generate the `android_release.apk` and `android_source.zip` files.
To delete the generated artifacts, the following commands can be used:
```
cd platform/android/java
./gradlew cleanGodotTemplates
```
Fixes#32168.
Previously we were returning all key up and key down messages as unhandled to the OS. This was resulting in crashes on certain keypresses (left cursor), for undetermined reason.
This PR defaults all key up and keydown messages to be returned as handled by Godot, except those explicitly coded as exceptions (currently volume keys only).
This fades out messages originating from the editor to make messages
printed by the project stand out more.
This also tweaks wording in some editor messages for consistency.
The application module `app` serves double duties of providing the prebuilt Godot binaries ('android_debug.apk', 'android_release.apk') and the Godot custom build template ('android_source.zip').
The language didn't make it clear that it's installing a *source* template
to the project folder, for later use when compiling custom APKs.
Fixes#28736.
It does check its permission every `vibrate_handheld()` calls.
Vibrate permission is added by checking it on export settings.
And there are some changes for deprecated method.
It had been synced with style changes (spaces -> tabs), not sure why
I accepted to merge it this way back then...
Synced with eb57657f66,
same as before.
Custom-changes will be reapplied in the next commit, if relevant.
So far we left most temporary files lying around, so this attempts to
fix that.
I added a helper method to DirAccess to factor out the boilerplate of
creating a DirAccess, checking if the file exists, remove it or print
an error on failure.
As of 3.1 and later, we have too many thirdparty C++ dependencies
and some internal uses of `new` and `delete` too for it to make
sense to build without the STL on Android.
The option has been broken since 3.0, and the "System STL" that we
relied on for basic support of `new` and `delete` is likely to be
dropped from the NDK:
https://android.googlesource.com/platform/ndk/+/ndk-release-r20/docs/BuildSystemMaintainers.md#System-STL
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
Fixes#17004
Currently the keydown and keyup messages are handled with method like this:
if ((source & InputDevice.SOURCE_JOYSTICK) == InputDevice.SOURCE_JOYSTICK
|| (source & InputDevice.SOURCE_DPAD) == InputDevice.SOURCE_DPAD
|| (source & InputDevice.SOURCE_GAMEPAD) == InputDevice.SOURCE_GAMEPAD) {
// joystick input
}
else
{
// keyboard input
}
The constant for SOURCE_DPAD is 513
10 0000 0001
and the constant for SOURCE_KEYBOARD is 257
1 0000 0001
However, rather confusingly, for many keyboards the source sent by android is 769
11 0000 0001
Thus the keyboard is passing the check as being a DPAD and being processed as a joystick rather than keyboard. This PR handles the specific case of 769, allowing input from physical keyboards.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
text=auto works well in Git 2.10+ but it's broken in previous versions,
which are still used in production on e.g. Ubuntu 16.04 LTS.
Also fix a couple missed text files with CRLF terminators.
.bat files likely require it to be processed properly on Windows,
but core.autocrlf should take care of converting them on the fly
when checking out on Windows.
Those were disable to keep size small, and on Android avoid the dependency on the STL,
but for tools build (editor) this is not really a concern.
Note: as of today it's not possible to build tools=yes for those platforms, but this
change is one of the necessary steps to enable it.
Fixes#25262.
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
For HTML5, we need to support S3TC if running on desktop,
and ETC or ETC2 for mobile, so make this explicit.
Add logic to check for ETC2 support on GLES3,
and remove incorrect ETC feature for GLES3 on Android.
Fix ETC check invalidating templates on HTML5.
Fixes#26476.
Also drop some unused files.
Renamed:
- `platform/iphone/sem_iphone.h` -> `semaphore_iphone.h`
(same for `osx`)
- `platform/uwp/gl_context_egl.h` -> `context_egl_uwp.h`
- in `platform/windows`: `context_gl_win.h`, `crash_handler_win.h`,
`godot_win.cpp`, `joypad.h` and `key_mapping_win.h` all renamed to
use `windows`. Some classes renamed accordingly too.
- `EditorExportAndroid` and `EditorExportUWP` renamed to
`EditorExportPlatformAndroid` and `EditorExportPlatformUWP`
- `power_android` and `power_osx` renamed to `PowerAndroid` and
`PowerOSX`
- `OSUWP` renamed to `OS_UWP`
Dropped:
- `platform/windows/ctxgl_procaddr.h`
From August 1, 2019, Google Play requires that all new apps and app updates
include 64-bit versions, so we enable ARM64 by default.
IINM support for x86 and x86_64 is still be optional, so not enabling them
out of the box.
Part of #25030.
Godot supports many different compilers and for production releases we
have to support 3 currently: GCC8, Clang6, and MSVC2017. These compilers
all do slightly different things with -ffast-math and it is causing
issues now. See #24841, #24540, #10758, #10070. And probably other
complaints about physics differences between release and release_debug
builds.
I've done some performance comparisons on Linux x86_64. All tests are
ran 20 times.
Bunnymark: (higher is better)
(bunnies) min max stdev average
fast-math 7332 7597 71 7432
this pr 7379 7779 108 7621 (102%)
FPBench (gdscript port http://fpbench.org/) (lower is better)
(ms)
fast-math 15441 16127 192 15764
this pr 15671 16855 326 16001 (99%)
Float_add (adding floats in a tight loop) (lower is better)
(sec)
fast-math 5.49 5.78 0.07 5.65
this pr 5.65 5.90 0.06 5.76 (98%)
Float_div (dividing floats in a tight loop) (lower is better)
(sec)
fast-math 11.70 12.36 0.18 11.99
this pr 11.92 12.32 0.12 12.12 (99%)
Float_mul (multiplying floats in a tight loop) (lower is better)
(sec)
fast-math 11.72 12.17 0.12 11.93
this pr 12.01 12.62 0.17 12.26 (97%)
I have also looked at FPS numbers for tps-demo, 3d platformer, 2d
platformer, and sponza and could not find any measurable difference.
I believe that given the issues and oft-reported (physics) glitches on
release builds I believe that the couple of percent of tight-loop
floating point performance regression is well worth it.
This fixes#24540 and fixes#24841
- The `cpu-features.{c,h}` code was only used by chance by the webm
(libvpx) code, so I moved it there. It was actually introduced before
that and wasn't in use, and libvpx just happened to be able to
compile thanks to it being bundled.
It could potentially be compiled on the fly from the Android NDK, but
since we plan to replace the webm module by a GDNative plugin in the
near future, I went the bundling route.
- `ifaddrs_android.h` is already provided in the Android NDK as
`ifaddrs.h`, same as on other Unixes. Yet we cannot use it until we
up the min API level to 24, where `getifaddrs` is first defined.
I moved the files to `thirdparty/misc` and synced them with upstream
WebRTC (only indentation changes and removal of `static` qualifiers).
Also removes dropped thirdparty files from COPYRIGHT.txt after changes
in #24105 and #24145.
Contrarily to what #23434 assumed, this is not a memory leak,
the VisualServerRaster instance is passed as a parameter to
VisualServerWrapMT's constructor.
Fixes#23437.
Fixes the following GCC 5 warnings:
```
core/os/file_access.cpp:49:19: warning: the address of 'FileAccess::create_func' will always evaluate as 'true' [-Waddress]
servers/audio_server.cpp:192:70: warning: comparison with string literal results in unspecified behaviour [-Waddress]
drivers/gles2/rasterizer_storage_gles2.cpp:4095:90: warning: NULL used in arithmetic [-Wpointer-arith]
modules/gdnative/register_types.cpp:237:3: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
platform/android/export/export.cpp:207:1: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
modules/gdscript/gdscript.h:150:67: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:119:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:123:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:127:50: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:131:52: warning: returning reference to temporary [-Wreturn-local-addr]
editor/plugins/skeleton_editor_plugin.cpp:34:36: warning: extra tokens at end of #include directive
modules/bullet/bullet_types_converter.cpp:31:9: warning: #pragma once in main file
editor/import/editor_scene_importer_gltf.cpp:1996:51: warning: name lookup of 'i' changed
modules/visual_script/visual_script_property_selector.cpp:402:45: warning: name lookup of 'E' changed
scene/gui/tree.cpp:1268:25: warning: name lookup of 'i' changed
scene/resources/visual_shader.cpp:808:32: warning: name lookup of 'i' changed
```
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
This adds a static is_viable() method to all rasterizers which has to be
called before initializing the rasterizer. This allows us to check what
rasterizer to use in OS::initialize together with the GL context
initialization.
This commit also adds a new project setting
"rendering/quality/driver/driver_fallback" which allows the creator of a
project to specify whether or not fallback to GLES2 is allowed. This
setting is ignored for the editor so the editor will always open even if
the project itself cannot run. This will hopefully reduce confusion for
users downloading projects from the internet.
We also no longer crash when GLES3 is not functioning on a platform.
This fixes#15324
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
-Project/Editor settings now show tooltips properly
-Settings thar require restart now will show a restart warning
-Video driver is now visible all the time, can be changed easily
-Added function to request current video driver
Initialised relevant variables before stating thread,
to prevent a branch on uninitialised data.
Fixed race condition in polling that could miss a device change.
Instead of editing the placeholder permissions actually write new ones.
This should solve the privacy statement problems for the Play store.
This means we also no longer need to placeholder permissions in the
template.
Now generating mouse events from touch is optional (on by default) and it's performed by `InputDefault` instead of having each OS abstraction doing it. (*)
The translation algorithm waits for a touch index to be pressed and tracks it translating its events to mouse events until it is raised, while ignoring other pointers.
Furthermore, to avoid an stuck "touch mouse", since not all platforms may report touches raised when the window is unfocused, it checks if touches are still down by the time it's focused again and if so it resets the state of the emulated mouse.
*: In the case of Windows, since it already provides touch-to-mouse translation by itself, "echo" mouse events are filtered out to have it working like the rest.
On X11 a little hack has been needed to avoid a case of a spurious mouse motion event that is generated during touch interaction.
Plus: Improve/fix tracking of current mouse position.
** Summary of changes to settings: **
- `display/window/handheld/emulate_touchscreen` becomes `input/pointing_devices/emulate_touch_from_mouse`
- New setting: `input/pointing_devices/emulate_mouse_from_touch`
Input source types are not pure bit flags, they are combinations of
flags, so != 0 check was incorrect and resulted in crashes later, when
trying to obtain the device.
set_pause can be called before the driver is initialized, and there
already is a check for that. The problem is that the 'active' field
was not initialied in the constructor, which lead to it having an
undefined value.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
- Add a iap_connect and iap_disconnect events for android platform.
- Add isConnected() function returning true if its connected to android service, false otherwise
(cherry picked from commit 546b48813f)
Command line options were refactored for 3.0 to follow the common usage
of double-dashed long options, but `--main-pack` went through the cracks.
Fixes#16533.
As it turns out, onTextChanged supplies a mutable CharSequence, which
lead to crashes or unexpected behaviour when input was coming faster
than it was processed.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
- EditorExportPlugin's _export_begin accepts all the arguments related
to the current export (is_debug, path, flags).
- EditorExportPlugin API is extended with methods allowing to configure
iOS export: add_ios_framework, add_ios_plist_content,
add_ios_linker_flags, add_ios_bundle_file.
- iOS export template now contains Godot as a static library so that
it can be linked with third-party Frameworks and GDNative static
libraries.
- Adds method to DirAccess for recursive copying of a directory.
- Fixes iOS export to work with Xcode 9 (released recently).
Removes the need for _MKSTR all over the place which has the drawback of
converting _MKSTR(UNKNOWN_DEFINE) to "UKNOWN_DEFINE" instead of throwing
a compilation error.
There are still some left in the Android Java code, even stuff to swap between
GLES1 and GLES2 support from early Godot days... would be good to see some cleanup
there too one day.
The "graphics/api" option for Android exports is removed, as only GLES 3.0 is supported.
It can be readded when GLES 2.0 support comes back. Fixes#13004.
Should fix issues some of us have with `misc/dist/uwp_template/AppxManifest.xml`
always showing up as modified.
Might cause issues on Windows due to the removal of BOMs or change of line endings
in some of the Mono, UWP or gradlew.bat files, we will test and adapt if need be.
On mobile platforms virtual keyboards take up significant amount of
screen space and UI containing a text box may need to be adjusted
after the keyboard appears to keep the text box visible to user. This
commit adds a way to obtain virtual keyabord height so that controls
are aware of how much they need to move.
- Dispatch input immediately as it comes, instead of delaying it to the
next step().
- Fix text box input handling when caret is at the middle of the text.
- Minimize queueEvent calls on Java side.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
It's the minimum version where GLES 3 API is available. It is already
the version Godot binary is compiled with for Android, but the config
files were not updated in time.
Namely, automatically pick debug over Wi-Fi for devices with an older release and debug over USB otherwise.
A message is printed both in editor output window and console (uppercase here) to let the user know about what mechanism is being used and why.
The changes include work done to ensure that GDNative apps and Nim
integration specifically can run on Android. The changes have been
tested on our WIP game, which uses godot-nim and depends on several
third-party .so libs, and Platformer demo to ensure nothing got broken.
- .so libraries are exported to lib/ folder in .apk, instead of assets/,
because that's where Android expects them to be and it resolves the
library name into "lib/<ABI>/<name>", where <ABI> is the ABI matching
the current device. So we establish the convention that Android .so
files in the project must be located in the folder corresponding to
the ABI they were compiled for.
- Godot callbacks (event handlers) are now called from the same thread
from which Main::iteration is called. It is also what Godot now
considers to be the main thread, because Main::setup is also called
from there. This makes threading on Android more consistent with
other platforms, making the code that depends on Thread::get_main_id
more portable (GDNative has such code).
- Sizes of GDNative API types have been fixed to work on 32-bit
platforms.
- The Windows, UWP, Android (on Windows) and Linux builds are
tested with Scons 3.0 alpha using Python 3.
- OSX and iOS should hopefully work but are not tested since
I don't have a Mac.
- Builds using SCons 2.5 and Python 2 should not be impacted.
Currently we rely on some undefined behavior when Object->cast_to() gets
called with a Null pointer. This used to work fine with GCC < 6 but
newer versions of GCC remove all codepaths in which the this pointer is
Null. However, the non-static cast_to() was supposed to be null safe.
This patch makes cast_to() Null safe and removes the now redundant Null
checks where they existed.
It is explained in this article: https://www.viva64.com/en/b/0226/
For every UNIX-derived (Android, Linux, macOS, iOS) flavor, a global counter is atomically incremented on thread start. That id is kept as thread-local storage.
Therefore, thread ids are sequential numbers, trivially comparable. This improves the previous state of things, in which `pthread_t` were casted to `Thread::ID` and unportabily compared. Also big, ugly thread ids appeared.
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Always use long form of arguments when starting a new Godot process from C++, for clarity and easy grepping
- Cleanup obsolete code here and there
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Cleanup obsolete code here and there
- Prefix all __adb__ commands with device specification to avoid errors when multiple devices connected.
- Include Android release in device data collection.
- Force system user:.
- Ability to enable/disable.
- Apply only if OS release >= 17 (when multiuser was introduced.
- Fix argument passing.
- Rename local variable `port` to `dbg_port` to better match its partner `fs_port`.
- Fix typo in error message.
Fixes GDNative build error on Android.
It's also discouraged by Google to rely on it. In case someone needs to check, use ``__ANDROID__`` instead, provided by the very same compiler.
This commit fixes errors occurring during Android export template
builds.
This required modification in third-party library (libpng) to compile
with NEON. Most likely a similar patch will be applied by them and we
could then replace the modified version.
Tried to organize the configure(env) calls in sections, using the same order
for all platforms whenever possible.
Apart from cosmetic changes, the following issues were fixed:
- Android: cleanup linkage, remove GLESv1_CM and GLESv2
- iPhone: Remove obsolete "ios_gles22_override" option
- OSX:
* Fix bits detection (default to 64) and remove obsolete "force_64_bits" option
(closes#9449)
* Make "fat" bits argument explicit
- Server: sync with X11
- Windows: clean up old DirectX 9 stuff
- X11:
* Do not require system OpenSSL for building (closes#9443)
* Fix typo'ed use_leak_sanitizer option
* Fix .llvm suffix overriding custom extra_suffix
/godot_dev/platform/android/java/src/com/google/android/vending/expansion/downloader/impl/DownloaderService.java:575: Error: The WIFI_SERVICE must be looked up on the Application context or memory will leak on devices < Android N. Try changing to .getApplicationContext() [WifiManagerLeak]
mWifiManager = (WifiManager) getSystemService(Context.WIFI_SERVICE);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Explanation for issues of type "WifiManagerLeak":
On versions prior to Android N (24), initializing the WifiManager via
Context#getSystemService can cause a memory leak if the context is not the
application context. Change context.getSystemService(...) to
context.getApplicationContext().getSystemService(...).
1 errors, 0 warnings
All the warnings are factored out of the platform-specific files and moved to
SConstruct. Will have to check that it does not introduce regressions on some
platforms/compilers.
(cherry picked from commit 31107daa1a)
The ID property for InputEvents is set by `SceneTree` when sending the event down the tree.
So there's no need for the platform specific code to set this value when it will later be overriden anyway...
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
The other subfolders of tools/ had already been moved to either
editor/, misc/ or thirdparty/, so the hiding the editor code that
deep was no longer meaningful.
Done:
- X11, server (tested)
- Windows (developed, would be nice to retest)
- OSX (not tested)
Prepared (not developed):
- Android (code is here, but may not compile)
- iphone
- winrt
- bb10
- haiku
- javascript
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!
Fix wrong path for 32-bit Windows, which fixes#7084
Exclude 32-bit Windows from multi-threaded linking because it's not supported by the NDK
Remove 32-bit Linux as there is no NDK variant for it
Done with `autopep8 --select=E7`, fixes:
- E701 - Put colon-separated compound statement on separate lines.
- E702 - Put semicolon-separated compound statement on separate lines.
- E703 - Put semicolon-separated compound statement on separate lines.
- E711 - Fix comparison with None.
- E712 - Fix (trivial case of) comparison with boolean.
- E713 - Fix (trivial case of) non-membership check.
- E721 - Fix various deprecated code (via lib2to3).
Took the opportunity to undo the Godot changed made to the
opus source. The opus module should eventually be built in its
own environment to avoid polluting others with too many include
dirs and defines.
TODO: Fix the platform/ stuff for opus.
Upgrade Gradle and Android plugin for Gradle
Disable all signing and zip-aligning for the export templates
Give correct names to generated APKs
Put .so files built by SCons right where Gradle has to pick them according to arch & build type
Downgrade NDK platform to 14 to match minSdkVersion
They were wrongly placed, creating a file named "-fpic" instead of
applying "-fpic" to the build. This file was in .gitignore, which made it
less noticiable.
This also adds build.gradle to .gitignore.
using ``NotificationCompat`` in ``support-v4`` library will increase APK filesize a little bit, but it guarantees to run OK with API 4+
tested with API 19 and 23 devices
If we update build gradle to use ``compileSdkVersion 23``,
``org.apache.http`` package causes error. (issue #4711)
We need to use ``useLibrary 'org.apache.http.legacy'`` to solve this problem.
To use ``useLibrary``, we need to use latest gradle also.
And now, we faced another problem with ``APK Expansion`` java sources.
```
/platform/android/java/src/com/google/android/vending/expansion/downloader/impl/DownloadNotification.java
137 : mCurrentNotification.setLatestEventInfo(mContext, mCurrentTitle, mCurrentText, mContentIntent); // causes error
```
So, some of APK Expansion java sources are updated by referencing commits from https://github.com/danikula/Google-Play-Expansion-File
And dropped V3CustomNotification.java which was for android 3.0, since godot supports android 14 (4.0) above officially.
Unfortunately, another problem, The 'MissingTranslation' error was occurred.
So, build.gradle is updated to use ``disable 'MissingTranslation'``
Additionally, I updated ``buildToolsVersion``, ``targetSdkVersion`` to latest version.
I tested APK Expansion funtionality on Android 6.0 (Nexus 9, Nexus 6p) and Android 4.4 (Galaxy Note 2) with Google Developer console.
It was added in 30d0ca9 for the Steam build but only enabled
when parsing a ._sc_ file that would define it.
It is now available for all users to toggle, in and outside of Steam.
Fixes#4073.
The 4.9 version is the default one, people can still build using 4.8
with older NDK versions by setting the (optional) NDK_TARGET
and NDK_TARGET_X86 environment variables.
Useful for everybody wanting to package godot.
Fixes#1026.
-> Retain the old behaviour: path in error msg only when exporting.
-> User templates override system templates
add version_info and icon sections in "export to windows platform".
add version_info and icon to godot exe file (editor & template exe).
fix an problem in image class.
change all default icons to android export icon (a little more rounded).
create an python script for convert file to cpp byte array for use in
'splash.h'.
-Visible 2D and 3D Shapes, Polygons, Tile collisions, etc.
-Visible Navmesh and Navpoly
-Visible collision contacts for 2D and 3D as a red point
-Customizable colors in project settings
some fixes for android build script.
remove armv6,x86 options and add "android_arch" option for select
compiler architecture (armv7,armv6,x86)(default armv7).
add architecture suffix for output files and you can compile for several
architecture simultaneously.
example:
libgodot.android.opt.debug.armv7.so
libgodot.android.opt.debug.armv7.neon.so
libgodot.android.opt.debug.armv6.so
libgodot.android.opt.debug.x86.so
now we can enable/disable neon on armv7 with "android_neon" option
(default enable).
add "NDK_TARGET_X86" option for select toolchain to use for the NDK x86
(default x86-4.8).
change inputs model for "ndk_platform" option (default android-15).
fix armv7 ccflags.
with this patch, must put libgodot_android.so file in specific
architecture folder:
armv7 (default): <android-java>/libs/armeabi-v7a/
armv6: <android-java>/libs/armeabi/
x86: <android-java>/libs/x86/
A general speedup should be apparent, with even more peformance increase when compiling optimized.
WARNING: Tested and it seems to work, but if something breaks, please report.
- Was duplicating the functionality of event.getActionIndex() but was missing the bitmask.
- Switched back to getActionIndex() but kept the corrected getPointerId() from
change #1980https://github.com/okamstudio/godot/pull/1908
-=-==-=-=-=-=-=-
-Small fixes in canvas item light shader
-Fixed compilation in server target
-Export for Android makes 32 bits display as default
-changed version to 1.1beta1
Added support for 2D shadow casters.
*DANGER* Shaders in CanvasItem CHANGED, if you are using shader in a
CanvasItem and pull this, you will lose them. Shaders now work through a
2D material system similar to 3D. If you don't want to lose the 2D
shader code, save the shader as a .shd, then create a material in
CanvasItem and re-assign the shader.
-=-=-=-=-=-=-=-=-=-
-Moved drawing code to a single function that takes linked list (should make it easier to optimize in the future).
-Implemented Z ordering of 2D nodes. Node2D and those that inherit have a visibility/Z property that affects drawing order (besides the tree order)
-Removed OpenGL ES 1.x support. Good riddance!
-Fixed many bugs in stretch mode
-Fixes to camera project and unproject as consequence of the above
-added setget to script (documented in script doc)
-more fixes to collada exporter for blender
-=-=-=-=-=-=-=-=-=-=
Build System:
-Big clean up of SCons, changed how builds are done to a much cleaner method (check the Github Wiki for instructions).
-Deactivated BlackBerry10 (sorry), if no mantainer found (or BlackBerry does not send us a Passort ;), platform will be removed as we have no longer devices to test.
Engine:
-Removed deprecated object and scene format (was in there just for compatibility, not in use since a long time).
-Added ability to open scenes even if a node type was removed (will try to guess the closest type).
-Removed deprecated node types.
-=-=-=-=-=-=-=-=-=-=-=-=-=-
3D Physics:
-Fixed "Bounce" parameter in 3D
-Fixed bug affecting Area (sometims it would not detect properly)
-Vehicle Body has seen heavy work
-Added Query API for doing space queries in 3D. Needs some docs though.
-Added JOINTS! Adapted Bullet Joints: and created easy gizmos for setting them up:
-PinJoint
-HingeJoint (with motor)
-SliderJoint
-ConeTwistJoint
-Generic6DOFJoint
-Added OBJECT PICKING! based on the new query API. Any physics object now (Area or Body) has the following signals and virtual functions:
-input_event (mouse or multitouch input over the body)
-mouse_enter (mouse entered the body area)
-mouse_exit (mouse exited body area)
For Area it needs to be activated manually, as it isn't by default (ray goes thru).
Other:
-Begun working on Windows 8 (RT) port. Compiles but does not work yet.
-Added TheoraPlayer library for improved to-texture and portable video support.
-Fixed a few bugs in the renderer, collada importer, collada exporter, etc.
-=-=-=-=-=-=-=-=-=-=-=-=-=
-New Vehicle (Based on Bullet's RaycastVehicle) - Vehiclebody/VehicleWheel. Demo will come soon, old vehicle (CarBody) will go away soon too.
-A lot of fixes to the 3D physics engine
-Added KinematicBody with demo
-Fixed the space query API for 2D (demo will come soon). 3D is WIP.
-Fixed long-standing bug with body_enter/body_exit for Area and Area2D
-Performance variables now includes physics (active bodies, collision pairs and islands)
-Ability to see what's inside of instanced scenes!
-Fixed Blend Shapes (no bs+skeleton yet)
-Added an Android JavaClassWrapper singleton for using Android native classes directly from GDScript. This is very Alpha!
-=-=-=-=-=-
-Fixed small bugs all around
-Added ability to show/hide entire sections of the spatial (3D) tree
-WIP new vehicle (not ready yet) based on Bullet
-=-=-=-=-=-=-=-=-=-=-=-=-=
-Begin work on Navigation Meshes (simple pathfinding for now, will improve soon)
-More doc on theme overriding
-Upgraded OpenSSL to version without bugs
-Misc bugfixes
-=-=-=-=-=-=-=-=-=--=-=-=
-Ability to set 2D nodes as bones
-Abity to set 2D nodes as IK chains
-2D IK Solver
-Improvements in the UI for adding keyframes (separate loc,rot,scale buttons)
================================
-resolved many graphical glitches with multiple lights in GLES2 render
-fixes and WIP apk expansion
-joystick support for Android by Ariel
==========
-NOTIFICATION_WM_QUIT fixed on android (seems tha way this is reported changed in newer sdk)
-WIP implementation of APK Expansion APIs for publishing games larger than 50mb in Play Store
-Feaures in the new tutorials are all present in the sourcecode
-This (hopefully) should get rid of the animation list order getting corrupted
-Improved 3D Scene Importer (Skeletons, Animations and other stuff were not being merged). Anything missing?
-In code editor, the automatic syntax checker will only use file_exists() to check preload() else it might freeze the editor too much while typing if the preload is a big resource
-Fixed bugs in PolygonPathFinder, stil pending to do a node and a demo
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-If re-importing from the "dependency changed" dialog, edited scene will keep the local changes.
-Imported scene will keep track of changes in the source asset
-Geometry changes in source geometry or nodes with a different transform will be updated.
-Materials will be kept if changed locally.
-New nodes added will be kept
-If nodes were reparented or renamed, they will still keep track
-Deleted notes will be restored, use the -noimp option to avoid this.
-In general, you can trust that if you do local modifications to the imported scene, they will not be erased after re-import.
-Erasing your changes is done by re-importing from the "Re-Import" menu, re-opening the "Import 3D Scene" dialog. This wil re-import fresh.
Overall, This should allow you to work on a scene and see changes made to 3D assets in real-time.
So Please test!!
-=-=-=-=-=-=-=-=-=-=
-Sprite3D and AnimatedSprite3D support.
-Opaque pre-pass works, is compatible with shadows
-Improved shadow map rendering (can differentiate between plain opaque and opaque with shaders/discard/etc)
-Added option to use alpha discard in FixedMaterial
-Improved Glow FX, many more options (three modes, Additive, Screen and SoftLight), strength and scale
-Ability for Background (image or cubemap) to send to glow buffer
-Dumb Deploy of clients now actually works in Android
-Many Many rendering fixes, 3D is much more usable now.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Auto indenter in code editor, this makes it much easier to paste external code.
-Zoom in 2D viewport now uses the mouse pointer as reference.
-Obscure hack to see where code/line of GDScript in C++ backtrace.
-Fixed a bug where keys would get stuck on X11 if pressed simultaneously
-Added Api on IP singleton to request local IPs.
-Premultiplied alpha support when importing texture, editing PNGs and as a blend mode.
-IMA-ADPCM support for samples, this means that sound effects can be compressed and use 4 timess less RAM.
-New 3D import workflow based on Wavefront OBJ. Import single objects as mesh resources instead of full scenes. Many people prefers to work this way. Just like the rest of the imported resources, these are updated in realtime if modified externally.
-Mesh resources now support naming surfaces. This helps reimporting to identify which user-created materials must be kept.
-Several fixes and improvements to SurfaceTool.
-Anti Aliasing added to WorldEnvironment effects (using FXAA)
-2D Physics bodies (RigidBody, KinematicBody, etc), Raycasts, Tilemap, etc support collision layers. This makes easy to group which objects collide against which.
-2D Trigger shapes can now also trigger collision reporting in other 2D bodies (it used to be in Area2D before)
-Viewport render target textures can now be filtered.
-Few fixes in GDscript make it easier to work with static functions and class members.
-Several and many bugfixes.
-Object Manipulator Gizmo keeps proper scale in all windows and projections, (configurable on settings too).
-Manipulator gizmos for other objects (camera, shapes, etc) massively improved and bug-fixed.
-Manipulator gizmos are different for edited object and other objects.
-Properly highlight manipulator gizmo handles when hovered.
-Fixed bugs in fragment program when using more than 1 light together.
-Reload png/jpg files automatically in editor if edited externally.
-Added 4-stages Parallel Split Shadow Mapping, to improve shadow quality in large scenarios
-Added PCF13 to improve smoothness of shadow borders
-General optimization of directional light shadow mapping for Orthogonal,PSM and PSSM.
-Fixed normal mapping when importing DAE files, works nicely now.
-Added new screen resizing options, stretch_2d is removed, new much more flexible ones.
-Fixed bug in viewport (can create more instances in 3d-in-2d demo now)
-Can set android permissions and screen sizes manually in the export settings
-Changed export templates extension to .tpz (too many people unzipped the manually..)
-File dialog now ensures that the proper extension is used (will not allow to save without it)
-Fixed bug that made collision exceptions not work in 2D
-Added new screen resizing options, stretch_2d is removed, new much more flexible ones.
-Fixed bug in viewport (can create more instances in 3d-in-2d demo now)
-Can set android permissions and screen sizes manually in the export settings
-Changed export templates extension to .tpz (too many people unzipped the manually..)
-File dialog now ensures that the proper extension is used (will not allow to save without it)
-Fixed bug that made collision exceptions not work in 2D
-Detect when free() might crash the project and throw error
-fixed 2D Bounce in physics (3d still broken)
-renamed “on_top” property to “behind_parent”, which makes more sense, old on_top remains there for compatibility but is invisible.
-large amount of fixes
-fix some menus
-fixed bug in out transition curves
-detect and remove file:/// in collada
-remove multiscript for now
-remove dependencies on mouse in OS, moved to Input
-avoid fscache from screwing up (fix might make it slower, but it works)
-funcref was missing, it's there now
fix hide soft keyboard by press 'back' button,
then click current focus text edit/line edit control,
soft keyboard won't show again
add features:
press enter key with line edit control will hide soft keyboard
-fixed TouchScreenButton with stretch2d
-fixed(?) OSX crash on startup (test!!)
-compilation fixes on windows
-CollisionPolygon editor works again
-find buttons en find dialog
-TileMap editor cleanup (removed "error", made nicer)
-viewport flicker fixed
-make .scn default extension for saving scenes
-export the rest of the network classes to gdscript
Fredia Huya-Kouadio
Timo Schwarzer
Rémi Verschelde
Marcus Brummer
PouleyKetchoupp
volzhs
Fabio Alessandrelli
SkyJJ
thebestnom
fhuya
lupoDharkael
Juan Linietsky
Juan Linietsky
Rajat Goswami
Aaron Franke
Marcel Admiraal
unknown
Pedro J. Estébanez
bruvzg
Rafał Mikrut
Hugo Locurcio
Alexander Holland
Mark Wynn Garcia
Bruno Lourenço
Ignacio Etcheverry
Haoyu Qiu
Jérémy Zurcher
Cagdas
Robbie Cooper
lawnjelly
IAmActuallyCthulhu
Robin Hübner
Cameron Reikes
Saracen
Ibrahn Sahir
Nils ANDRÉ-CHANG
JohnJLight
BastiaanOlij
wombatstampede
hbina085
George Marques
clayjohn
Guilherme Felipe
Hendrikto
marxin
DESKTOP-3H3MR3A\eloisa
Ricardo Lüders
Ivan Ponomarev
Hein-Pieter van Braam
Simon Sikström
Xavier Sellier
Konrad Nowakowski
Karen Schwane
M. Huri
dumitru-stama
Wojciech Milkowski
FeralBytes
luz.paz
Wojciech Milkowski
Crazy-P
Marcin Zawiejski
Ridwan Abdul Hafidh
elasota
Alessandro
Tiago Quendera
Wilson E. Alvarez
Patrick Kaster
Max Hilbrunner
Konstantin Zaitsev
geequlim
Dmitry Pupinin
Daniele Giuliani
RameshRavone
Ruslan Mustakov
Viktor Ferenczi
Emmanuel Leblond
Colin Kinloch
Bernhard Liebl
Nathan Warden
Unknown
Rhody Lugo
Ruslan Mustakov
Leon Krause
AndreaCatania
Andreas Haas
Elliott Sales de Andrade
letheed
Maxim Sheronov
Poommetee Ketson
Henrik Andersson
Matthias Hoelzl
TwistedTwigleg
toger5
Indah Sylvia
L. Krause
Chris Serino
Andreas Haas
Sergey Pusnei
denis
Julian Murgia
Bojidar Marinov
Jerome67000
Pedro J. Estébanez
Randy Tan Shaoxian
Rémi Verschelde
Błażej Szczygieł
Anthony Fieroni
syskrank
Johan Manuel
Skyfrit
Mario Schlack
Jamil Halabi
sanikoyes
J08nY
fluffrabbit
Hubert Jarosz
blubee
Ariel Manzur
punto-
mrezai
est31
mikica1986vee
masoud bh
firefly2442
PeaceSells
Kyle Luce
vipsbpig
Simon Wenner
Juan Linietsky
Martho42
reduz
rollenrolm
Dana Olson
marynate
sikakraa