Instead of updating all viewports, then blitting all viewports
to the backbuffer, then swapping all buffers, we run through
all viewports and render, blit, and swap backbuffer before
going to the next viewport.
Fixes include using proper depth buffer format in 3D (this had previously been fixed already but the changes were lost in a rebase), Remove unused lighting and shadowing code in 2D, and update 2D UBOs using glBufferSubData so that they remain the appropriate size.
Using this command:
```
find -name "thirdparty" -prune -o -name "*.h" -exec sed -i {} -e '/return /! s/\t\([A-Za-z0-9_]* \*[A-Za-z0-9_]*\)\;/\t\1 = nullptr;/g' \;
```
And then reviewing the changes manually to discard the ones that don't
seem correct/safe/good (notably changes to `core` unions).
This allows light sources to be specified in physical light units in addition to the regular energy multiplier. In order to avoid loss of precision at high values, brightness values are premultiplied by an exposure normalization value.
In support of Physical Light Units this PR also renames CameraEffects to CameraAttributes.
Per-light energy gives more control to the user on the final result of
volumetric fog. Specific lights can be fully excluded from volumetric fog
by setting their volumetric fog energy to 0, which improves performance
slightly. This can also be used to prevent short-lived dynamic effects
from poorly interacting with volumetric fog, as it's updated over several
frames by default unless temporal reprojection is disabled.
Volumetric fog shadows now obey Light3D's Shadow Opacity property as well.
The shadow fog fade property was removed as it had little visible impact
on the final scene's rendering.
At this time, it works best in the Vulkan Renderers as they support using multiple samplers with the same texture.
In GLES3 this feature really only allows you to use the screen texture without mipmaps if you want to save the cost of generating them.
This can be used to make shadows translucent for a specific light.
The light distance fade system also uses this to smoothly fade the shadow
when the light fade transition distance is greater than 0.
`shader_uniform` is now consistenly used across both per-shader
and per-instance shader uniform methods. This makes methods easier
to find in the class reference when looking for them.
Mipmap LOD bias can be useful to improve the appearance of distant
textures without increasing anisotropic filtering (or in situations
where anisotropic filtering is not effective).
`fsr_mipmap_bias` was renamed to `texture_mipmap_bias` accordingly.
The property hint now allows for greater precision as well.
Implement built-in classes Vector4, Vector4i and Projection.
* Two versions of Vector4 (float and integer).
* A Projection class, which is a 4x4 matrix specialized in projection types.
These types have been requested for a long time, but given they were very corner case they were not added before.
Because in Godot 4, reimplementing parts of the rendering engine is now possible, access to these types (heavily used by the rendering code) becomes a necessity.
**Q**: Why Projection and not Matrix4?
**A**: Godot does not use Matrix2, Matrix3, Matrix4x3, etc. naming convention because, within the engine, these types always have a *purpose*. As such, Godot names them: Transform2D, Transform3D or Basis. In this case, this 4x4 matrix is _always_ used as a _Projection_, hence the naming.
* Moved preprocessor to Shader and ShaderInclude
* Clean up RenderingServer side
* Preprocessor is separate from parser now, but it emits tokens with include location hints.
* Improved ShaderEditor validation code
* Added include file code completion
* Added notification for all files affected by a broken include.
`rendering/quality/shadows` is now `rendering/quality/positional_shadow`
to explicitly denote that the settings only affect positional light shadows,
not directional light shadows.
Shadow atlas settings now contain the word "atlas" for easier searching.
Soft shadow quality settings were renamed to contain the word "filter".
This makes the settings appear when searching for "filter" in the
project settings dialog, like in Godot 3.x.
This has several benefits:
- Transparency sorting issues inherent to alpha blending no longer occur.
- Alpha hash materials can now cast shadows (also works with
GeometryInstance3D Transparency's property for alpha hash materials).
- Higher performance.
Initial TAA support based on the implementation in Spartan Engine.
Motion vectors are correctly generated for camera and mesh movement, but there is no support for other things like particles or skeleton deformations.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
fixed and simplified gl_manager_windows
swap buffers now called for all windows
fixed missing pixel format setting in additional windows
this makes them work in OpenGL contexts
changed verbose error printing to write once
this error message happens very frequently while opengl3 is not finished
removed dead code no longer needed after changes
fixed comments that were misinformation
window messages during window creation now handled
these were previously discarded
messages now tunnel the required context
changed failure to create opengl3 window on windows to be more fatal
marked a problem with pen code
conditional compilation of vulkan and opengl3 on windows fixed
windows debug builds now show messages on debug console also
rendering driver selection box now shows only compiled drivers
marked some problematic code
thanks to akien-mga for patiently rewriting my style mistakes
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
This method can be used to get the graphics API version currently in
use (such as Vulkan). It can be used by projects for troubleshooting
or statistical purposes.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Convert method signature parameters to const where it is possible
# Conflicts:
# drivers/gles3/rasterizer_canvas_gles3.cpp
# drivers/gles3/rasterizer_canvas_gles3.h
# editor/plugins/animation_state_machine_editor.cpp
# editor/plugins/animation_state_machine_editor.h
Add "generate_mipmap" font import option.
Add some missing features to the Sprite3D.
Move BiDi override code from Control to TextServer.
Add functions to access TextServer font cache textures.
Add MSDF related flags and shader to the standard material.
Change standard material cache to use HashMap instead of Vector.
3 options are available:
- Light and Sky (default)
- Light Only (new)
- Sky Only (equivalent to `use_in_sky_only = true`)
Co-authored by: clayjohn <claynjohn@gmail.com>
This can be used to fade lights and their shadows in the distance,
similar to Decal nodes. This can bring significant performance
improvements, especially for lights with shadows enabled and when
using higher-than-default shadow quality settings.
While lights can be smoothly faded out over distance, shadows are
currently "all or nothing" since per-light shadow color is no longer
customizable in the Vulkan renderer. This may result in noticeable
pop-in when leaving the shadow cutoff distance, but depending on the
scene, it may not always be that noticeable.
* Adds optional vec4 USERDATA1 .. USERDATA6 to particles, allowing to store custom data.
* This data is allocated on demand, so shaders that do not use it do not cost more.
16-bit shadow atlases are already the default in the project settings,
but low-level methods used 24-bit shadows by default.
This makes low-level methods more consistent with the default project
settings to avoid accidental performance issues when users change
the shadow size at run-time.
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
Using codespell 2.1.0.
Method:
```
$ cat > ../godot-word-whitelist.txt << EOF
ang
ans
ba
curvelinear
dof
doubleclick
fave
findn
gird
inout
leapyear
lod
merchantibility
nd
numer
ois
ony
que
readded
seeked
statics
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance3D
(and therefore MeshInstance3D), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
This can be used to distinguish between integrated, dedicated, virtual
and software-emulated GPUs. This in turn can be used to automatically
adjust graphics settings, or warn users about features that may run
slowly on their hardware.
Note, the editor build requires the mbedtls module to be manually
enabled, as it is currently needed as a ResourceUID dependency.
This will need to be addressed in a separate PR.
- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
Lots of internal API changes and some docstrings were lost in the conversion.
I manually salvaged many of them but for all the rendering-related ones, an
additional pass is needed.
Added missing enum bindings in BaseMaterial3D and VisualServer.
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
All the calculations leading up to `mipLevel` are only relevant for
Panorama mode. Similarly, the `source_resolution` uniform is only
needed for that mode.
`ERROR: _display_error_with_code: CanvasShaderGLES3: Fragment Program Compilation Failed:
0:166(2): error: `return' with wrong type int, in function `map_ninepatch_axis' returning float` caused by #34704
Some cases were not handled properly for Polygon2D after making changes in common code to fix Line2D antialiasing. Added an option for drawing polygons to differentiate the two use cases.
Fixes#34568
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Polygon2D:
The property wasn't used anymore after switching from canvas_item_add_polygon() to canvas_item_add_triangle_array() for drawing.
Line2D:
Added the same property as for Polygon2D & fixed smooth line drawing to use indices correctly.
Fixes#26823
As discussed in #32657, this can't be done here as lines can be used
with a canvas scale, and this breaks them.
A suggestion is to do the pixel shifting at matrix level instead.
Fixes#33393.
Fixes#33421.
While OpenGL ES 3.0 and WebGL 2.0 both support non power-of-2 (NPOT)
textures in their specification, the situation seems to be less clear
about *compressed* NPOT textures using repeat or mipmap flags.
At least Chrome on Linux doesn't seem to support this combination,
and a variety of mobile hardware have similar limitations.
As a workaround, we force decompressing such textures when running on
WebGL 2.0, at the cost of loading time and memory usage.
Fixes#33058.
OpenGL uses the diamond exit rule to rasterize lines. If we don't shift
the points down and to the right by 0.5, the line can sometimes miss a
pixel when it shouldn't. The final fragment of a line isn't drawn. By
drawing the lines clockwise, we can avoid a missing pixel in the rectangle.
See section 3.4.1 in the OpenGL 1.5 specification.
Fixes#32279
In 2.1 and 3.0, light_vec could be modified for altering shadow_computations.
But it broke shadows when rotating light. shadow_vec would do the same, but without breaking
shadows in rotated lights if not used.
Add inverse light transformation to shadow vec, so it's not affected when rotating lights;
Added usage define for shadow vec.
For shadow vec working properly when rotating a light, it's needed to multiply it by light_matrix normalized. Added usage define in order to don't do that if shadow_vec not used.
Changed the behaviour of the Linear tonemapping operator to not clamp to [0, 1] range
in the case when KEEP_3D_LINEAR is defined. This allows to render values > 1.0 in
floating point texture targets (via Viewport) for further processing or saving high
dynamic range data into files. This only works when no color conversion is active.
Condensed some if and ERR statements. Added dots to end of error messages
Couldn't figure out EXPLAINC. These files gave me trouble: core/error_macros.h, core/io/file_access_buffered_fa.h (where is it?),
core/os/memory.cpp,
drivers/png/png_driver_common.cpp,
drivers/xaudio2/audio_driver_xaudio2.cpp (where is it?)
This makes height fog appear at the bottom of the scene
(instead of the top), which is generally the expected result.
This also tweaks the fog height setting hint to be more flexible.
This closes#30709.
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
This decreases the number of samples significantly, leading to a
notable performance increase with only a very slight loss in
visual quality.
This also tweaks the default SSAO settings to use 3×3 blurring,
which makes noise patterns much less visible.
If a non-imported texture resource file (e.g. DDS) gets updated the editor
doesn't reload it. The cause of the problem is two-fold:
First, the code of ImageTexture assumes that textures are always imported
from an image, but that's not the case for e.g. DDS. This change thus adds
code to issue a resource reload in case an image reload is not possible
(which is the case for non-imported texture resources).
Second, the code is filled with bogus calls to Image::get_image_data_size()
to determine the mipmap offset when that should be done using
Image::get_image_mipmap_offset(). Previous code literally passed the integer
mip level value to Image::get_image_data_size() where that actually expects
a boolean. Thus this part of the change might actually solve some other
issues as well.
To be pedantic, the texture_get_data() funciton of the rasterizer drivers is
still quite a mess, as it only ever returns the whole mipchain when
GLES_OVER_GL is set (practically only on desktop builds) but this change does
not attempt to resolve that.
The bake mode property of lights previously didn't affect GI probes.
This change makes the GI probe ignore lights that have their bake mode
set to disabled.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
FBX support and MMD (pmx) support.
Normals, Albedo, Metallic, and Roughness through Arnold 5 Materials for Maya FBX.
Maya FBX Stingray PBS support.
Importing FBX static meshes work.
Importing FBX animations is a work in progress.
Supports FBX 4 bone influence animations.
Supports FBX blend shapes.
MMDs do not have an associated animation import yet.
Sponsored by IMVU Inc.
- Cleaned up and improved the code determining when we need to use a depth
prepass (previously it wasn't executed in certain cases even if it was
needed)
- Added code to prepare and bind the depth texture even when no depth prepass
or MRTs (more precisely effect buffers) are used
Fixes#25870, #25535, and #25387.
- Texture arrays and 3D textures weren't working previously due to an
incorrect number of calls to glTexImage3D with incorrect level parameters.
This change fixes that.
- Fixed the incorrect calculation of the byte size of layered textures.
- Added the layer count to the debugger info when viewing video memory usage.
This allows most demos to run without any ubsan or asan errors. There
are still some things in thirdpart/ and some things in AudioServer that
needs a look but this fixes a lot of issues. This should help debug less
obvious issues, hopefully.
This fixes#25217 and fixes#25218
It is not valid in C++ to store into shadow_matrix1[16] with shadow_matrix1[16 * j]
(for j > 0). Even though there's a valid space in a struct after shadow_matrix1.
Knowing that GCC performs aggressive optimizations that eventually lead
to a wrong code. Code has been changed into union where one can either
use shadow_matrix[4 * 16], or individual shadow_matrix1, shadow_matrix2, etc. GCC pragma
is not needed any longer.
This error is generated whenever rendering collision debug meshes.
There's no reason why this should be treated as an error as index-less
meshes are supported and used across the engine.
