Previously, only StandardMaterial3D could be defined as an alternative
to ShaderMaterial.
This also reorders the CanvasItemMaterial property hints to follow
alphabetical order (which is enforced by the inspector).
* there is now a more clear distinction between camera_2d and camera_3d functions in the engine code
* simplified camera2d's exported interface - now everything happens directly with the 'current' variable and make_current and clear_current are no longer exposed- there were some situations where calling one instead of set_current would result in incomplete results
* rebased to current godot master
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
* Editor 2D viewport now uses embedded subwindows (windows no longer pop up)
* Restored the ability to disable 3D on the 2D viewport (makes 3D not display on 2D when there is a camera on the scene)
* Tweens were changed from Node to RefCounted. New API is inspired by DOTween.
* Tweens are created and managed by SceneTree, similar to SceneTreeTimer, which makes them ultra cheap to use a lot.
* Animating with Tweens is done by creating sequences of Tweeners. You create them from code and they autostart by default (fire-and-forget).
* There are 4 Tweeners that cover the former Tween functionality: PropertyTweener, IntervalTweener, CallbackTweener and MethodTweener.
* The methods were simplified a lot. Long argument lists are replaced with chained calls on Tweens and Tweeners.
* Tweeners by default execute in sequence, so it's easy to create complex chained animations.
* You can bind a Tween to a node. Tween will be removed automatically when the bound node is freed.
* Added a function to ignore subsequent commands if they don't fall within the slice.
* This will be used by the new TileMap to properly provide animated tiles.
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
* Adds both a preview sun and preview environment to the 3D editor.
* They are valid as long as a DirectionalLight3D and WorldEnvironment are not in the scene.
* If any is added to the scene, the respective preview is disabled.
* Changed WorldEnvironment to better handle multiple node versions.
* Added a function in SceneTree to get the first node in a group.
* Fixed button minimum size to also consider font height if no text is there, this broke with the TextSever PR.
This makes them easier to distinguish, especially when used
in a TileMap.
The default color's opacity has been slightly decreased to account
for the new outline.
Renamed to ActionMapEditor as it is more generic and can be used for more than just the InputMapEditor if required.
This also includes a new Event Configuration dialog (previously "Press A key...") which can be used to create and edit InputEvents for any use - like the Project Settings input map, or the Editor Settings shortcuts.
Implements https://github.com/godotengine/godot-proposals/issues/1835#issuecomment-727186192
* PauseMode is now ProcessMode, containing the following states:
```
PROCESS_MODE_INHERIT, // same as parent node
PROCESS_MODE_NORMAL, // process only if not paused
PROCESS_MODE_PAUSE_ONLY, // process only if paused
PROCESS_MODE_ALWAYS, // process always
PROCESS_MODE_DISABLED, // never process
```
* NOTIFICATION_PAUSED and NOTIFICATION_UNPAUSED are received effectively when the node is paused and unpaused (not any longer when pause mode is set in SceneTree).
* Renamed some nodes that used ProcessMode/process_mode to specify a callback type to ProcessCallback to avoid clashes.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
Setting each point's position was missing for 3D. Now enabling collision
render debug will display contact points for 3D physics, the same way it
does for 2D physics.
Note: Multimesh rendering seems not to work in this scenario on master,
but it's working fine on 3.2.
This changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
The `current_screen` field was never being set on tooptip windows, leading to scenarios where, if the editor wasn't on screen 0, tooltips may not appear in the right place, especially when your screens have different resolutions.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
unhandled_key_input changed to unhandled_button_input. Controls can set a 'shortcut_context' which they can then use to determine if their shortcuts should be triggered or not, based on if the viewport's focused GUI control is a child of their 'shortcut context'.
Prevents `Timer` to prematurely start and timeout immediately if internal
processing is enabled manually with `Timer.set_process_internal(true)` or
`Timer.set_physics_process_internal(true)`.
Even if the internal processing is enabled manually, the user still has to
actually start the timer with `start()` method explicitly.
The return type for `_make_custom_tooltip` is clarified as Control, and users
should make sure to return a visible node for proper size calculations.
Moreover in the current master branch, a PopupPanel will be added as parent
to the provided tooltip to make it a sub-window.
Clarifies documentation for `Control._make_custom_tooltip`, and shows how to
use the (until now undocumented) "TooltipPanel" and "TooltipLabel" theme types
to style tooltips.
Fixes#39677.
-Allows merging several 2D objects into a single draw operation
-Use current node to clip children nodes
-Further fixes to Vulkan barriers
-Changed font texture generation to white, fixes dark eges when blurred
-Other small misc fixes to backbuffer code.
-Removed normal/specular properties from nodes
-Create CanvasTexture, which can contain normal/specular channels
-Refactored, optimized and simplified 2D shaders
-Use atlas for light textures.
-Use a shadow atlas for shadow textures.
-Use both items aboves to make light rendering stateless (faster).
-Reorganized uniform sets for more efficiency.
focus_target->exclusive_child could be invalidated during the call to
focus_target->grab_focus(), now using the same logic with safe accesses
to focus_target.
Previously, when the mouse was released after dragging a scrollbar,
its highlight was not dropped (if the mouse cursor was still inside
the viewport). This seems to be because the currently hovered control
only gets updated when the mouse is moved.
This commit fixes the dropping of the cosmetic highlight by running
the check for whether the currently hovered control has changed on
mouse-clicks, in addition to to the existing mouse-movements.
This fixes a bug where users of the scrollbar had to be very careful
not to move the mouse outside the viewport, otherwise the scrollbar
would drop its drag-action and stop scrolling until clicked again.
The existing behaviour had the side-effect of also dropping the
cosmetic highlighting of the scrollbar (in addition to the dragging),
for the specific case where the mouse was move outside the window.
The previous behaviour did nothing to remove the highlight if the
mouse was released (but not moved) inside the viewport.
This separate issue with the lingering highlight of the scrollbar
(until a mouse-movement action is performed inside the viewport) is
fixed in an immediate followup to this commit.
Closes bug #39634
On Windows, WINDOW_EVENT_FOCUS_IN was never sent by the display server
for popups, because WM_ACTIVATE events are received during the call to
_update_window_style, which happened before the callbacks were set.
This was causing some issues with the way Popup is now handling closing on
parent focus.
Now _update_window_style is only called during show_window, after Window
initialized callbacks.
It can be enabled in the Project Settings
(`rendering/quality/screen_filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
It will also slightly brighten the scene's dark areas.
As a result, it should be enabled only when banding is noticeable enough.
This closes#17006.
In general they are more confusing to users because they expect
inheritance to fully override parent methods. This behavior can be
enabled by script writers using a simple super() call.
When creating a window, Godot would first register it to the WM(show it) and then set its flags.
This works fine on a floating WM, but on tiling WMs as soon as a window gets registered
the WM immediately acts on the window by scaling it up and treating it as a generic window,
being registered without any special flags.
This commit separates the showing of the window into another function and calls it after the most important flags are set,
making windows with special flags(eg. all popups) work again on tiling WMs.
Fixes#37930
Change error checking in `duplicate_signals()` to check for path to
`p_original`, thus adhering to the method used in `duplicate`, instead
of checking for ownership.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Since it only accepts power-of-two values, exposing it as an enum
makes more sense. This also allows for adding property hints to indicate
the performance cost of each value.
This also improves property hints for MSAA and FXAA.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Note: Only replaced 2 instances to test, Node.get_children and TileMap.get_used_cells
Note: Will do a mass replace on later PRs of whathever I can find, but probably need
a tool to grep through doc.
Warning: Mono will break, needs to be fixed (and so do TypeScript and NativeScript, need to ask respective maintainers)
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
- Travis: Change x11 to linuxbsd
- SCons: Change x11 plataform to linuxbsd
- Plugins: Remove ; to avoid fallthrough warning
- DisplayServerX11: Implement set_icon
- DisplayServerX11: Fix X11 bug when a window was erased from windows
map, all the changes from that erased windows are sending to the main
window
- DisplayServerX11: Reorder create_window commands
- DisplayServerX11: Change every Size2 to Size2i and Rect2 to Rect2i
where it belongs
+ More X11 fixes which have been integrated directly back into reduz's
original commits while rebasing the branch.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
It's tedious work...
Some can't be ported as they depend on private or protected methods
of different classes, which is not supported by callable_mp (even if
it's a class inherited by the current one).
Remove now unnecessary bindings of signal callbacks in the public API.
There might be some false positives that need rebinding if they were
meant to be public.
No regular expressions were harmed in the making of this commit.
(Nah, just kidding.)
Previously if a disconnect occured while downloading a non recoverable error was displayed. This PR attempts to fix this by making sure `request_completed` signal is emitted with an `STATUS_CONNECTION_ERROR` response code.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
Fix -Wunused-variable, -Wunused-but-set-variable and -Wswitch warnings
raised by GCC 8 and 9.
Fix -Wunused-function, -Wunused-private-field and
-Wtautological-constant-out-of-range-compare raised by Clang.
Fix MSVC 2019 warning C4804 (unsafe use of type 'bool' in comparison
operation).
GCC -Wcpp warnings/Clang -W#warnings (`#warning`) are no longer raising
errors and will thus not abort compilation with `werror=yes`.
Treat glslang headers are system headers to avoid raising warnings.
Re-enables us to build with `werror=yes` on Linux and macOS, thus
catching warnings that would be introduced by new code.
Fixes#36132.
- Now is sent the method ID rather the full function name.
- The passed IDs (Node and Method) are compressed so to use less possible space.
- The variant (INT and BOOL) is now encoded and compressed so to use much less data.
- Optimized RPCMode retrieval for GDScript functions.
- Added checksum to assert the methods are the same across peers.
This work has been kindly sponsored by IMVU.
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Regression from #34040, apparently making this a const reference
introduces issues (not sure why, but previous code worked fine).
Fixes#34691.
Co-authored-by: dankan1890 <mewuidev2@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
When own_world property is set, the viewport stores a unique resource for the world. With this change it keeps being updated from changes made to the world property instead of storing a default empty world with environment settings that can't be modified.
Fixes#23412
This allows setting the `read_chunk_size` of the internal HTTPClient.
This is important to reduce the allocation overhead and number of file
writes when downloading large files, allowing for better download speed.
A new external MSAA setting was introduced in https://github.com/godotengine/godot/pull/33518
that fixed issues on GLES2 and Oculus Mobile VR. To avoid misunderstanding it was suggested
by @BastiaanOlij and discussed on discord to rename it to AndroidVR.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
Recursive calls to Control::_modal_stack_remove could cause a crash because of the list element not being invalidated while being erased from the list.
It happens in the state machine case by hiding a line edit control when it loses focus.
Fixes#23808
Use case:
yield(get_tree().create_timer(2), "timeout")
Some resources were never released because the SceneTreeTimer was keeping a reference to GDScriptFunctionState in its signal connections, while GDScriptFunctionState was holding a reference to the SceneTreeTimer object. Cleaning all signal connections on game exit fixes the issue.
Fixes#29946
This method can be used to generate custom node warnings by script.
Node::_get_configuration_warning was already exposed to generate custom warnings, but it wasn't fully usable without being able to notify the scene tree when the warning needs to appear or change.
Clicking or using the scrollwheel outside of the focused control triggers a focus change. This makes sense for mouse clicks, but scrollwheeling outside the focuses control does not. This PR ignores scrollwheeling outside of the focused control.
HTTPRequest used to have its own `status` variable but it would never be
updated since the status of the client would be used instead.
This caused potential crashes in some edge cases.
The `status` variable is now removed, and the client status is used in
checks instead.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
In practice this only happens when duplicating a node which is not in
the scene tree yet, as nameless nodes get assigned a generated name
when added to the scene tree.
Fixes#27319.
It appears that Object::script may be a valid ScriptInstance but not be
castable to Ref<Script>. There were only 5 places in the code that made
this assumption. This commit fixes that.
When calling call_group from C++, the function name is not passed on to
call_group_flags, resulting in first argument being mistakenly used
instead of function.
Not that this is critical, but it makes behavior of GUI and 2D/3D picking consistent among them.
This also contributes to dropping GUI focus when the mouse leaves the window (in addition to when it loses focus).
1. Consider 'own_world' as well as 'world' to stop propagating enter/exit world notifications.
2. Clean & fix handling of camera currency.
This fixes some random crashes and error logs in the editor; namely
- when enabling/disabling own world in a Viewport;
- when switching back from a subscene displayed into a main scene's Viewport;
- when exiting the editor after any of them;
- memory corruption (can that explain certain other seemingly unrelated crash reports?).
This also fixes situations where a Viewport and its main Camera get out of sync about which World is relevant to them.
Acknowledge mouse button events as position tellers (to make picking more solid; for instance, the touch mouse is raised with a mouse unpressed event that may have a more current position)
Forget mouse position for physics if touch mouse raised (because the position known as last is no longer meaningful)
Remove needless check for mouse over/exit (now there's code to inject an spurious move for cases where camera/objects have moved)
Restrict 2D mouse over/exit to mouse events (including emulated from touch; true touches shouldn't trigger the signals)
Fixes#26460.
reduz wanted the original PR reverted due to issues, so this follow-up had to be too
(done in 8cb54182ad). But he ended up adapting part of
the original PR in 27d7772381 without including this fix.
WARNING: Test well in every OS, if mouse wheel events are not properly sent as pressed+unpressed pair, it will fail and break (and the OS needs to be fixed). Only tested on X11 so far.
The conversion from an String to int can overflow int and int64
so it is safer to manipulate strings when we try to find the next
available name for a Node.
At least the ones I got when I compiled it using Mingw64 POSIX on Xubuntu 18.04. Plus use the Size2 of get_window_size() directly, rather than reconstructing it.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
New APIs in 2D physics allow intersection queries filtered by CanvasLayer object instance id. Viewport keep an inventory of its descendant CanvasLayers and takes advantage of all that to test picking with the mouse/touch position correctly transformed for each CanvasLayer.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
Before this change, missing User-Agent and Accept headers were automatically
added on all platforms. Setting the User-Agent header forces the browser to
do a CORS preflight (see 1) which fails if the HTTP endpoint is not
configured appropriate. It's not neccesary to set either header as the
browser sets them and so this commit disables that functionality on the JS
target.
1: https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS#Simple_requests
Automatic poll from SceneTree is enabled by default.
This allows for polling (and thus RPCs/RSETs) manually in other loops
(e.g. physics, thread, specific step) and for proper mutex protecion
when accessing the multiplayer API from threads (e.g. for sending larger
files in chunks).
Now generating mouse events from touch is optional (on by default) and it's performed by `InputDefault` instead of having each OS abstraction doing it. (*)
The translation algorithm waits for a touch index to be pressed and tracks it translating its events to mouse events until it is raised, while ignoring other pointers.
Furthermore, to avoid an stuck "touch mouse", since not all platforms may report touches raised when the window is unfocused, it checks if touches are still down by the time it's focused again and if so it resets the state of the emulated mouse.
*: In the case of Windows, since it already provides touch-to-mouse translation by itself, "echo" mouse events are filtered out to have it working like the rest.
On X11 a little hack has been needed to avoid a case of a spurious mouse motion event that is generated during touch interaction.
Plus: Improve/fix tracking of current mouse position.
** Summary of changes to settings: **
- `display/window/handheld/emulate_touchscreen` becomes `input/pointing_devices/emulate_touch_from_mouse`
- New setting: `input/pointing_devices/emulate_mouse_from_touch`
Allows shortening the two line method of Timer.set_wait_time
followed by Timer.start set wait_time as a parameter to
Timer.start. Also modifies the class documentation.
Fixes: #18107
It seems that popups were intended to "grab" the mouse click that triggered them, but their intent was being lost. This commit does the necessary changes to let it happen and updates items that were trying to get advantage of it, because the semantics of `Control::grab_click_focus()` have changed a bit. Namely, it must be called **before** showing the modal.
This allows to popup a menu and activate an item in it in a single click-point-release cycle, instead of having to click once to open the menu and once more to pick an item.
This ability is extended even to context menus activated with the RMB (or any other mouse button, for that matter). The editor benefits from this in the context menu of the tree dock, which has been patched to opt-in for this feature.
This improves UX a bit by saving unnecessary clicks.
From now on, `PopupMenu` always grabs the click and also invalidates the first button release unless the mouse has moved (that's what `set_invalidate_click_until_motion()` was doing and now it's removed), so there is no longer the need of doing both things at every point a pop-up menu is shown.
Font update after resize relies on the viewport size which was updated
after the font was already refreshed, which resulted in artifacts when
it was rendered into the actual/new viewport size.
Fixes#15173.
Previously this option seemed to be the sole responsible for enabling
physics processing in Viewport, while several other features like
tooltips and debugging collision hints rely on it.
All this logic is moved to internal processing (it's incorrect to let
it be affected by users disabling physics/idle processing), and disabling
physics object picking no longer affects the internal physics processing.
Fixes#17001.
The previous logic with VERSION_MKSTRING was a bit unwieldy, so there were
several places hardcoding their own variant of the version string, potentially
with bugs (e.g. forgetting the patch number when defined).
The new logic defines:
- VERSION_BRANCH, the main 'major.minor' version (e.g. 3.1)
- VERSION_NUMBER, which can be 'major.minor' or 'major.minor.patch',
depending on whether the latter is defined (e.g. 3.1.4)
- VERSION_FULL_CONFIG, which contains the version status (e.g. stable)
and the module-specific suffix (e.g. mono)
- VERSION_FULL_BUILD, same as above but with build/reference name
(e.g. official, custom_build, mageia, etc.)
Note: Slight change here, as the previous format had the build name
*before* the module-specific suffix; now it's after
- VERSION_FULL_NAME, same as before, so VERSION_FULL_BUILD prefixed
with "Godot v" for readability
Bugs fixed thanks to that:
- Export templates version matching now properly takes VERSION_PATCH
into account by relying on VERSION_FULL_CONFIG.
- ClassDB hash no longer takes the build name into account, but limits
itself to VERSION_FULL_CONFIG (build name is cosmetic, not relevant
for the API hash).
- Docs XML no longer hardcode the VERSION_STATUS, this was annoying.
- Small cleanup in Windows .rc file thanks to new macros.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Notable potentially breaking changes:
- PROPERTY_USAGE_NOEDITOR is now PROPERTY_USAGE_STORAGE | PROPERTY_USAGE_NETWORK, without PROPERTY_USAGE_INTERNAL
- Some properties were renamed, and sometimes even shadowed by new ones
- New getter methods (some virtual) were added
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
-Fixes to unwrapper (remove degenerates), makes Thekla not crash
-Added optional cancel button in EditorProgress
-Added function to force processing of events (needed for cancel button)
That happened when an instanced scene was being duplicated while it also contained nodes added to it in the scene holding the instance.
Plus:
- Add comments about the logic behind all this.
- Move the null guard to where it can protect the most, but consider it a runtime error rather that a situation we expect.
Fixes#13282.
- Partially revert 6496b53549, adding a comment about why duplications of signals must happen as a second phase.
- Add fallback logic for connections to nodes not in the duplicated hierarchy.
- Remove redundant call to `Node::_duplicate_signals()`.
Fixes#12951.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
When duplicating node with script, properties of script
weren't copied sometimes.
It happened because properties were copied in arbitrary
order, and properties of the script were setted before the
"script" property itself, i.e. while script is sill NULL.
Also, DUPLICATE_SCRIPTS flag wasn't working - script was
always copied because `_duplicate` looked for
"script/script" property while it should be just "script".
Now "script" property is being set before all others,
and "script/script" changed to
`CoreStringNames::get_singleton()->_script`.
reduz
Rémi Verschelde
Hugo Locurcio
Gilles Roudière
Hendrik Brucker
Josh Chandler
sygi
Michael Alexsander
Aaron Franke
PouleyKetchoupp
kobewi
Fabio Alessandrelli
Lightning_A
Haoyu Qiu
Pedro J. Estébanez
Rémi Verschelde
TwistedTwigleg
kleonc
Yuri Sizov
Bastiaan Olij
EricEzaM
jfons
Nathan Franke
Rafał Mikrut
Marcel Admiraal
Juan Linietsky
fabriceci
Anshul7sp1
hilfazer
Zak Stam
Johannes
Oliver Dick
Emmanuel Leblond
Delf Neumärker
abaire
bruvzg
MarvinFF
nemerle
univeous
AberrantWolf
Daniel Ting
Yuri Roubinsky
Andrii Doroshenko (Xrayez)
Mark Riedesel
Duroxxigar
Meriipu
Mateo Dev .59
Yetizone
Jonah Stich
Adam Brown
SekoiaTree
George Marques
opl-
Lorenzo Cerqua
Maganty Rushyendra
Timo Schwarzer
unknown
ArrowInAKnee
Dominik 'dreamsComeTrue' Jasiński
qarmin
clayjohn
lupoDharkael
Thakee Nathees
Rasmus Vermeulen
Andrea Catania
x2f
Martin Capitanio
volzhs
Holger Dammertz
Erik
Nils ANDRÉ-CHANG
fhuya
Emmanuel Barroga
shaderbeast
merumelu
IAmActuallyCthulhu
Mitch Curtis
Muller-Castro
Shiqing
Bojidar Marinov
Furkan Türkal
JohnJLight
MrCdK
Silvano Cerza
James Buck
Hein-Pieter van Braam-Stewart
Daw11
Jean Dao
Paul Trojahn
Andrettin
marxin
Marcelo Fernandez
K. S. Ernest (iFire) Lee
Arjen van Staalduinen
Mateus Felipe C. C. Pinto
Konrad Nowakowski
Guilherme Felipe
Ruslan Mustakov
Superwaitsum
DualMatrix
Max Hilbrunner
Unknown
Kelly Thomas
Ibrahn Sahir
GagaPete
khairul169
Webster Sheets
toger5
Geequlim
Ignacio Etcheverry
Anish
Geoffrey
Link
eon-s
Bernhard Liebl
Ranoller
luz.paz
Artem Varaksa
Zephilinox
Poommetee Ketson
PJB3005
Will Nations
Nathan Warden
Matthias Hoelzl
mhilbrunner
Marc Gilleron
Konstantin Zaitsev
Ian
letheed
Tetane
Paulb23
Evgeny Zuev
Maxim Sheronov
David Saltares