1. Backport sub-resource cache fixes from master.
Uses a cache by index to keep sub resource indices consistent.
2. The subindex within Resource wasn't synchronized with the path stored in cache when saving a packed scene. It could cause
sub-resources to be swapped when loading the same packed scene in
the same session.
Now the subindex in Resource reflects the sub-resource path in cache,
making saving and loading sub-resources consistent.
Co-authored-by: latorril <latorril@gmail.com>
Calculating the width for 100 items takes a millisecond in
a debug build on an i7-6700K. It's likely that the editor can remain
smooth even with 1,000 items, especially in a release build.
Although the visibility enabler worked to turn on and off AnimationPlayer as it enters and exits the view frustum, this was of little use as bones animation and especially software skinning still take place driven by the AnimationTree node.
This PR adds the ability to turn on and off AnimationTree, and AnimationTreePlayer nodes as they enter or exit the view frustum, which achieves the intention of switching off expensive animation processing.
DynamicFont kerning was removed in
a9b7843dca.
This readds kerning support and fixes it at the same time.
Co-authored-by: follower <follower@rancidbacon.com>
The new color for screen drawing was chosen to be easier to distinguish
from the 2D viewport limits.
This also makes lines less opaque when the Camera2D has the Current
property enabled. The increased line width is enough to spot the
camera easily, and the increased opacity on top of that felt obnoxious.
(cherry picked from commit 8e2a7fff1d)
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- backported and extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Fix a bug that occour when there are hidden tabs in tab_container.
The visualization isn't correct due to missing values in tab_widths array.
(cherry picked from commit e7e7aa7d12)
Decide whether half offset should be added based on the value used for calculating the return value of this method.
(cherry picked from commit f1420c7cbf)
This commits adds a new emitter type for particles material
and 3D CPU particles. The new emitter is called "ring"
and it can emit either in a ring or cylinder fashion.
This adds the following properties for the emitter:
1. ring_emitter_axis: the axis along which the ring/cylinder
will be constructed
2. ring_emitter_radius: outer radius of the ring/cylinder
3. ring_emitter_inner_radius: inner radius of the cylinder.
when set to zero, particles will emit in the full volume.
4. ring_emitter_height: height of the ring/cylinder emitter.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
(cherry picked from commit 3bb40669d5)
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
(cherry picked from commit c7b53c03ae)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Backport of #48239.
Fix for a regression from software skinning support:
instance_attach_skeleton wasn't called in set_mesh before, and it's
causing issues when the mesh instance is loaded from a thread.
1. Call from a thread queues instance_attach_skeleton with RID() in the
visual server.
2. Call from the main thread when entering tree calls
instance_attach_skeleton immediately with a valid skeleton
3. Queued instance_attach_skeleton resets the attached skeleton
This change prevents that to happen by making sure
instance_attach_skeleton is not called on set_mesh as it was doing
before, but there might be a more general problem to solve in how
visual server commands are executed when resources are loaded from
a different thread.
* Better handling of the scene's environment energy in the lightmapper
bakes.
* Fixed a bug where ProceduralSky::get_panorama() returned a reference
instead of a copy.
* Removed includes to Embree's internal header files.
MeshInstance added as child nodes for CollisionObject debug shapes can
be invalidated while deleting the collision object (child nodes are
deleted first), which caused accesses to invalid memory in
shape_owner_remove_shape that lead to random crashes.
Also optimized accesses to shapes to avoid copy-on-write on each
iteration.
Minimap size couldn't be resized back after been resized bigger than GraphEdit cause the grabber was out of GraphEdit.
This commit prevents resizing minimap bigger than GraphEdit and fix this issue.
(cherry picked from commit 045f55ec00)
There was a specific case where the node path wasn't checked for
validity before trying to access the attachment node.
It could cause lots of error log noise in both editor and game.
When AnimatedSprite2D::play() was called before SpriteFrames has been initialized, a crach occurred (issue #46013).
Modification : An error message on null check test has been added to prevent crash.
Fix#46013.
(cherry picked from commit 324ab63844)
If the editor was started with --debug-collisions, 3d shapes were
displayed twice, both with the gizmo and debug shapes. Some shapes could
also persist after being removed due to the usage of queue_free() to
destroy the debug shapes.
When creating a Windows folder via a Godot's dialog, the extra spaces are not removed which causes problems with Windows. We now remove leading and trailing whitespace when creating a dir.
(cherry picked from commit c8538153b0)
My mistake when cherry-picking #46699 with f8ee8b1b73,
I forgot to amend the cherry-pick to change 'offsets' back to 'margins' for the 3.2
branch.
Fixes#46979.
- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
* Removed the pointers to PhysicalBone in the code, as they were unused.
* Forward ported the SkeletonIK bone scaling fix I made from Godot 3.2 to Godot 4.0.
* Fixed issue where the root bone in the IK chain would not rotate correctly.
* The issue turned out to be the update_chain function being called in solve. This would override the root bone transform incorrectly and that would cause it not to rotate after just a single solve. Removing the update_chain function fixes the issue and based on my testing there are no adverse effects.
* While the old fix on this PR (prior to a force push) required a hack fix, this new fix does not!
* Removed the update_chain function. This change doesn't appear to have any adverse effects in any of the projects I tested (including with animations, Skeleton3D or otherwise, from AnimationPlayer nodes!)
* Fixed issue where the scale of the Skeleton node would change the position of the target, causing it not to work with skeletons that have a global scale of anything but 1.
(cherry picked from commit a622649876)
The logic for internal process and internal physics process in Camera2D was very buggy and convoluted for historical reasons.
This is a cleanup to make the logic simpler and easier to follow.
More work is needed to make sure that those options actually solve users' issues, so we prefer to remove the options for 3.2.4 and revisit for a future release.
If true, collision shapes are shown in the editor and at run-time.
Requires Visible Collision Shapes to be enabled in the Debug menu,
for collision shapes to be visible at run-time.
The problem happened when `ImageTexture::create_from_image` was called
with an empty image. In this situation an RID was allocated despite the
texture being null. The destructor would then crash trying to acess this
null texture.
Fixes#46274
(cherry picked from commit 46218d8c37)
Previously if a disconnect occured while downloading a non recoverable error was displayed. This PR attempts to fix this by making sure `request_completed` signal is emitted with an `STATUS_CONNECTION_ERROR` response code.
(cherry picked from commit 70c39737db)
When one of the bodies exited the tree, the corresponding node path was
reset instead of just resetting the joint from the physics server. That
was causing the node path to be reset on scene switch when one of the
bodies is under the joint in the scene tree.
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
(cherry picked from commit d61cd469f1)
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Two common problems have emerged as a result of transform snapping:
1) Camera jitter with a camera following a snapped object
2) Pixel gaps between e.g. a platform and a player, where a platform rounds down and a player rounds up
Using round seems to greatly reduce problems due to camera jitter. It also may prove better for pixel gaps because pixel art is often designed on a grid, so whole numbers are too expected, which are unstable with floor().
This fixes a bug where users of the scrollbar had to be very careful
not to move the mouse outside the viewport, otherwise the scrollbar
would drop its drag-action and stop scrolling until clicked again.
The existing behaviour had the side-effect of also dropping the
cosmetic highlighting of the scrollbar (in addition to the dragging),
for the specific case where the mouse was move outside the window.
The previous behaviour did nothing to remove the highlight if the
mouse was released (but not moved) inside the viewport.
This separate issue with the lingering highlight of the scrollbar
(until a mouse-movement action is performed inside the viewport) is
fixed in an immediate followup to this commit.
Closes bug #39634
(cherry picked from commit 44657db3e2)
This reverts commit a8105d73c7.
We need to improve the logic somewhat to make the warning more specific to
actual problematic scenarios. Will likely be cherry-picked again + fixes
for the next release.
Fixes#46376.
- Mention the origin of the `get_node()` call.
- Mention whether the attempted path is absolute or relative.
See #46214.
(cherry picked from commit e6abdc943d)
This makes them easier to distinguish, especially when used
in a TileMap.
The default color's opacity has been slightly decreased to account
for the new outline.
Having white or strongly desaturated debug collision shape color
setting would make it harder to visualize enabled / disabled state.
This change makes it easier to visualize enabled / disabled state
by reducing the alpha color by half when disabled.
(cherry picked from commit 0c4594f6c9)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
Index to find the last line wrap index was off by one, which prevented the first wrapped line to trigger autoscroll.
(cherry picked from commit 121030940c)
Added BakedLightmap.use_hdr and BakedLightmap.use_color properties
that can reduce the flie size of lightmap texture at the expense of quality.
Changed the denoiser to work in a single buffer, reducing RAM
usage. Also added the `-mstackrealign` flag in the denoiser compilation
for MinGW builds. This flag helped fix a bug in Embree, so I want to see
if it will help fix GH #45296.
Setting each point's position was missing for 3D. Now enabling collision
render debug will display contact points for 3D physics, the same way it
does for 2D physics.
Note: Multimesh rendering seems not to work in this scenario on master,
but it's working fine on 3.2.
(cherry picked from commit e5e9be8355)
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
- Fix crash when a ray hits a texel with a UV2 coordinate exactly
equal to 1.0.
- Take BakedLightmap extents into account.
- Clear capture data between bakes.
- Fix minor issues with seam correction.
When visual instances are hidden, there is no need to update their global transforms and send these to the visual server. This only needs to be done when the objects are reshown.
This commit adds a view-dependant fade to the 3D viewport grid. It fades out
at steep view angles to hide the solid regions that appear far from the camera.
I also included a fade to hide the grid borders.
I added some improvements to the dynamic grid when the camera is in orthogonal mode.
It properly handles zoom now, and the grid center is now set to the intersection point
between the grid plane and the camera forward ray, keeping the grid
always visible.
(cherry picked from commit 73e62dffb9)
After adding `_change_notify("extents");` to `set_extents()` method in `BakedLightmap` class
the issue was fixed
Fix disconnection between Gizmo and inspector values on BakedLightmap
Remove unnecessary `_change_notify("bake_extents")` call from `set_extents()`
An error message is also no longer printed.
This matches the behavior found in most UI frameworks where having
equal minimum and maximum values is considered acceptable.
This closes#43179.
(cherry picked from commit 44204ec32d)
The RichTextLabel class is inconsistent in how it updates the
visible_characters and percent_visible properties when either is changed.
To keep both properties consistent, update percent_visible when setting the
visible_characters property.
For both properties, when setting one, notify change for the other.
Docs updated for member set_visible_characters on RichTextLabel class.
(cherry picked from commit 463e2002ab)
- Fix Embree runtime when using MinGW (patch by @RandomShaper).
- Fix baking of lightmaps on GridMaps.
- Fix some GLSL errors.
- Fix overflow in the number of shader variants (GLES2).
Fix Raycast node render debug not showing in editor camera preview.
Use dynamic mesh update to change the ray on-the-fly without too much
extra cost when collision debug is enabled.
Fixes#43571
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
This change does two things:
1. Properly update the internal shape data using _update_in_shape_owner
when updating a shape (in 2D it was resetting one way collision)
2. Avoid unnecessary updates when calling set_shape with the same shape,
which happens each time a shape property is modified
(e.g shape.extents.x = ...)
Fixes#45090
(cherry picked from commit 4b43cd17c5)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Complete rewrite of spatial partitioning using a bounding volume hierarchy rather than octree.
Switchable in project settings between using octree or BVH for rendering and physics.
This allows the user to query the AnimationNodeStateMachinePlayback's current
play position and total length of current animation state. These methods are currently
used in the editor plugin, but can also be useful for querying general playback state
information.
Added documentation for AnimationNodeStateMachinePlayback's `get_current_play_position`
(cherry picked from commit 674fb52f52)
Body transforms from physics are used to setup the joint and they are
only updated before the physics step by default.
Without forcing the transform update, joints could use a previous
position if the body's position was set after it was added to the scene.
3D physics is not affected by this issue.
(cherry picked from commit 11bee25de4)
See #36285 which mistakenly added documentation for the whole C++ API, while
some of it is meant to be and stay private as it's not exposed to scripts.
The access modifiers and method prefix were not used properly.
Cleanup code, and rename wrong `group_name` parameters to `method`, as it's a
method name which is being broadcast.
This is a very old class from pre-open source days, chances are that it was
just forgotten and not meant to be kept as is and undocumented.
(cherry picked from commit 79ba70f7ee)
Partially revert change allowing sprite get_rect snapping to be controlled by `pixel_snap` again rather than `transform_snap` (to prevent breaking compatibility). Adds a final `use_camera_snap` project setting to allow snapping viewports as in reduz original PR.
See #43689.
Also 'fixed' some spelling for behavior in publicly visible strings.
(Sorry en_GB, en_CA, en_AU, and more... Silicon Valley won the tech spelling
war.)
(cherry picked from commit a655de89e3)
Prevents `Timer` to prematurely start and timeout immediately if internal
processing is enabled manually with `Timer.set_process_internal(true)` or
`Timer.set_physics_process_internal(true)`.
Even if the internal processing is enabled manually, the user still has to
actually start the timer with `start()` method explicitly.
(cherry picked from commit afcb6f38db)
The return type for `_make_custom_tooltip` is clarified as Control, and users
should make sure to return a visible node for proper size calculations.
Moreover in the current master branch, a PopupPanel will be added as parent
to the provided tooltip to make it a sub-window.
Clarifies documentation for `Control._make_custom_tooltip`, and shows how to
use the (until now undocumented) "TooltipPanel" and "TooltipLabel" theme types
to style tooltips.
Fixes#39677.
(cherry picked from commit c5d8dafec4)
Previously, when the mouse was released after dragging a scrollbar,
its highlight was not dropped (if the mouse cursor was still inside
the viewport). This seems to be because the currently hovered control
only gets updated when the mouse is moved.
This commit fixes the dropping of the cosmetic highlight by running
the check for whether the currently hovered control has changed on
mouse-clicks, in addition to to the existing mouse-movements.
(cherry picked from commit e8804b9978)
Every NOTIFICATION_PROCESS the spatial_editor_plugin.cpp is calling set_use_fxaa which is causing a redraw_request(). Same with debanding.
These can be fixed be checking for noop state changes.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
This fixes a regression from PR #40313 (support for software skinning in MeshInstance).
Before, the base mesh was always updated on load even if not skinning
was used, which caused mesh instance materials to be reset on the
rendering side.
Now the base mesh is set only when it has been modified, or when
switching software skinning on or off. In this case the mesh instance
materials are always updated properly afterwards.
My mistake I missed this before the PR got merged:
is_visible_in_tree() should be avoided being called per frame unless absolutely necessary, because it is a recursive function that traverses the scene tree. It should be used when deciding on rare occasions whether to switch on or off skeleton processing, but it is better to use the cheaper is_visible() check on the per frame update.
Don't apply lighting to objects when they have a lightmap texture and
the light is set to BAKE_ALL. This prevents applying the same direct
light twice on the same object and makes setting up scenes with mixed
lighting much easier.
Option in MeshInstance to enable software skinning, in order to test
against the current USE_SKELETON_SOFTWARE path which causes problems
with bad performance.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
These values are only meaningful in the range 0 to 1.
Make sure the editor enforces reasonable values.
Fixes#42202.
(cherry picked from commit 6c18baee9c)
When changing the texture region for a StyleBox, the regions was not updating automatically in the Texture editor.
(cherry picked from commit 7d7727bade)
InterpolatedCamera has already been removed from the `master` branch.
This adds a deprecation notice to inform people about the upcoming removal
in Godot 4.0.
Its functionality could be replicated in a GDScript add-on with relative
ease.
Fixes#41006 (regression from #39164).
The original alignment fix was limited to PROCESS_DRAW mode, which
caused some discrepancies with PROCESS_POINTER mode.
Now only PROCESS_CACHE is excluded with a condition a few lines above.
(cherry picked from commit b783fa1416)
LineEdit should not return early when processing KEY_ENTER, so it can
consume the event properly.
Regression introduced by mistake while fixing enter events for Android
(PR #40487 - c0b394572f)
(cherry picked from commit 5c63dec36e)
Updated set_max_length() function to actually pull a substring of the current text so it's not all thrown away when the new max length is shorter than the current length.
(cherry picked from commit 71febfd6e2)
The constant is already exposed in GDScript, but not in C++.
This information is useful for implementing animated texture
resource importers via modules.
(cherry picked from commit 528056a3c5)
Changed CPU velocity calculation for EMISSION_SHAPE_DIRECTED_POINTS
to follow the same logic as in the GPU version:
mat2 rotm;
rotm[0] = texelFetch(emission_texture_normal, emission_tex_ofs, 0).xy;
rotm[1] = rotm[0].yx * vec2(1.0, -1.0);
VELOCITY.xy = rotm * VELOCITY.xy;
Now both CPUParticles2D & CPUParticles3D (z disabled) show the same results
as their GPU counterparts and take the initial velocity settings into account.
(cherry picked from commit 1c231cacb3)
Adding support for disabling virtual keyboard on mobile platforms, in
order to make it consistent with LineEdit.
It allows implementing a custom virtual keyboard.
See: https://github.com/godotengine/godot/pull/41139
Add any leftover fractional pixels to an error accumulator. When the
accumulator is greater or equal to one, add one pixel to the current
Node's size and subtract one from the accumulator.
Closes#36522
(cherry picked from commit 04ea6ec88d)
This is a revert of 9d78274e06, which was an attempt to fix#21431, but in the end it seems a different problem was the root of the issue.
Renewing focus steal allowance every time is needed on Windows.
Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
Emit `node_selected` and `node_deselected` signals where appropriate
when selecting or unselecting multiple GraphEdit nodes at once.
(cherry picked from commit c1d5c7727c)
Add optional parameter to specify whether applying rotation to the
PathFollow3D's Transform is necessary, preventing erroneous updates.
(cherry picked from commit be3a1769fe)
`ConvexPolygonShape2D` and `ConcavePolygonShape2D` are only meant to be
used directly in code and not in the editor for physics-based use cases
specifically.
Developers are advised to use `CollisionPolygon2D` instead, which does
generate those shapes under the hood, handling polygon convexivity,
proper orientation etc.
(cherry picked from commit dc446203be)
In set_stream() we write to 'playback' while accessing the same object
in _mix_audio() in audio thread. Protect the 'write' part in
set_stream() to avoid possible crash in _mix_audio() function.
(cherry picked from commit e435d57758)
This reverts commit 7f61710183.
See #38868, in its current implementation a small skew value might end up
serialized to scene files due to floating point precision errors, which is
detrimental to VCS.
This can be cherry-picked anew once a fix for #38868 has been found.
Make command-backspace in line edit work like other macOS applications.
If there is a selection, command-backspace deletes the selection.
If there isn't a selection, command-backspace deletes from the cursor to the beginning of the line edit.
This addresses part of godotengine/godot#23548
- The repaint code was moved outside of set_current_tab() and to a "_repaint()" private function
- _on_theme_changed() will now only call _repaint() and update()
This means _on_theme_changed() will do only what it needs (repainting the TabContainer to account for the new theme)
fixes#39498
(cherry picked from commit 5123006f06)
Change error checking in `duplicate_signals()` to check for path to
`p_original`, thus adhering to the method used in `duplicate`, instead
of checking for ownership.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
The crash happens further down when setting an invalid owner in
`Node::_set_owner_nocheck` but I couldn't figure out how to fix it.
But here the proper fix is to catch the invalid scene file early on
and fail loading it.
Part of #17372.
(cherry picked from commit c080ec5da2)
`get_char_size()` is a public virtual function defined in the `Font`
class. Implementations exist for both `BitmapFont` and `Dynamic Font`.
However, it was only exposed to the GDScript API through the Bitmap
Font, and not for Dynamic Font.
This commit exposes the function through `Font` instead.
Fixes#23967
(cherry picked from commit a4413710f9)
The specific case for object reference seems unnecessary, as `RES res = var`
already does the work. The case where REF is invalid is never hit in the case
of already freed objects.
The assignment `res = *r` was causing the resource to be always invalidated
on the 3.2 branch.
(cherry picked from commit 12685df423)
* On press left+command+shift or right+command+shift it should behave like shift+home or shift+end and select the text
* Using home and end events as reference
(cherry picked from commit d8f8a3c606)
This reverts commit bf1cc116e1.
This needs more discussion to avoid breaking some users' expectations.
See #38086 for arguments.
(cherry picked from commit 69f36cea8c)
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
(cherry picked from commit efb1f7d76b)
(cherry picked from commit 38085f2f6982c491935a434bb45e358dbebe1714)
(cherry picked from commit b9c280b73ff6a13ea490d2da0f2728bcef3038dc)
(cherry picked from commit 895ed2aed7)
Calls to set_amount can increase the size of the particle array, but do not zero the memory, they only set the active flag to false. This uninitialized memory can be sent to the GPU, possibly as NaNs.
RichTextEffect can now have a bbcode string starting like one of the built-in.
It was impossible before as the built-in would take precedence over the custom effect that has the same bbcode start.
Example : [fade] would take precedence over [fade_in]
(cherry picked from commit b4e3042cba)
The stack size of the undo history of a TextEdit was not limited leading
to potential memory leaks when doing lots of operations on a TextEdit.
This commit adds the option gui/common/text_edit_undo_stack_max_size
to the project settings. The first element of the undo stack is popped
if the stack's size exceeds this value ensuring limited memory usage.
The default stack size setting is 1024.
Fixes#37838.
(cherry picked from commit 4a82390aaf)
Needed for the next commit. That's the only place in all the Godot code base
where that's attempted and it's not needed because Objects are not meant to
be copied that way.
This adds 2 new values (items and draw calls) to the performance monitor in a '2d' section, rather than reusing the 3d values in the 'raster' section.
This makes it far easier to optimize games to minimize drawcalls.
* item_selected and item_focused docs incorrectly had 'id' as the parameter. Changed to
'index'.
* Fix parameter name in ADD_SIGNAL callin code.
(cherry picked from commit a8de034f78)
Correct backtrack assignment to prevent excessive tabulation. Worth
noting that tabulation is treated differently in RichTextLabel because
of custom user-asignable tab variable which creates problems with
dynamic fonts specifically.
(cherry picked from commit 2000e110a9)
A click on the dimmed background of a popup in the editor should stop the input event from propagating to the background.
This solution reuses the system introduced in commit efc3ffb8, taking advantage of the hide() notifications from the modal where we will set the flag "pass_on_modal_close_click(false)" to stop event handling at the viewport input event handling.
The viewport first hides the modal and after marks the input as handled if the flag mentioned above is set.
Fixes#36341
(cherry picked from commit 35bc88ca34)
The `TextEdit` one was indeed a potential bug.
The `PCKPacker` one seems to be a false positive, it's already in a
`for` loop that depends on `files.size()`.
(cherry picked from commit ca4e4506db)
Placeholder with length greater than `max_length` are allowed, so there is no reason for those update condition.
It fixes the odd alignment of placeholder when it's length is greater than `max_length`
(cherry picked from commit 43b2f75d64)
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
In the case where a ConcavePolygonShape is used as a shape for a RigidBody
in another mode than static, a configuration warning will appear in the
editor.
(cherry picked from commit ad227d9a85)
The code above for horizontal movement uses the right margin (_positive_ x direction) when the offset is negative, but vertical movement uses the top margin (_negative_ y direction) when the offset is negative.
The resulting problem is easily seen in the editor — set the drag margins to be asymmetrical, turn on drawing the drag margins, and slide the offsets from -1 to 1 and back. The horizontal offset moves the camera's center between the left and right margins, but the vertical offset gets them backwards and will move the camera outside the margins entirely.
(cherry picked from commit 40816574ac)
The special case atan(y,0) of the built-in shader function atan(y,x)
returns different results on different devices. So this commit will add
checks when the atan(y,x) function is used in ParticlesMaterial to set
the direction of GPU Particles to make sure the desired values are
returned (act as atan2(y,x)).
(cherry picked from commit 3580ad6005)
A picture is easier to describe this issue than words. Basically, rich
text effects allowed for character visibility changes. While doing so
would work properly, the rich text label would render the next `word` in
an offset accounting for the hidden characters (leaving a huge space.)
This patch fixes this issue by keeping track of the amount of
`backtrack` necessary per line.
(cherry picked from commit b3fd4884d7)
The workaround for moving the pivot is not needed anymore, in fact it causes all transforms applied to control nodes to jitter while animating (if a pivot offset is set).
This can be observed via AnimationPlayer and Tween.
The fix is to remove the obsolete workaround that causes this bug.
Fixes#28804
(cherry picked from commit dfb7d46a2a)
- Add some missing descriptions.
- Add links to tutorials for ARVR and AnimationTree.
- Style fixes.
- Engine changes:
* Make `AnimationNodeTransition.input_<number>` properties internal
so that they don't appear in the docs. They still appear in the
inspector based on the actual number of inputs requested.
* Drop unimplemented `CPUParticles.flatness`. It's only used for 3D
particles in `ParticlesMaterial`, and thus only relevant for
`CPUParticles3D`.
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
See https://github.com/godotengine/godot/issues/22581#issuecomment-576836691.
Not using `or_greater` as there *is* a max size value that the current
implementation can accept. If using e.g. size 6000 with
FiraSans-Regular.ttf, errors are printed due to failing asserts on a
glyph size that should be within 4096x4096 px.
Regression from #34040, apparently making this a const reference
introduces issues (not sure why, but previous code worked fine).
Fixes#34691.
Co-authored-by: dankan1890 <mewuidev2@gmail.com>
When there is no collision with a floor the get_floor_normal() function
should return the zero vector to be consistent with get_floor_velocity().
Renames floor_normal to up_direction in all bindings.
Updates the documentation of get_floor_normal() and get_floor_velocity()
to make it clear when the values are valid. Updates the documentation for
move_and_slide() and move_and_slide_with_snap() to use the new up_direction
parameter name.
These properties will affect the minimum size of LineEdit:
* The right icon (`set_right_icon`)
* The clear button (`set_editable` and `set_clear_button_enabled`)
* The text, when "expand to text length" is enabled (`set_text`)
Adds a size check to the array returned by `surface_get_arrays`.
During debugging, `create_outline` also crashes when the indices size is
one (not a multiple of three). For now, just reports the error and fail
the function.
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Updating the floor velocity with the body's current linear velocity
discards the velocity component provided by the body's angular
rotation. Without the current contact point there is no way to calculate
the current velocity component provided by the body's angular rotation
therefore we need to use the velocity calculated at the time of the
collision.
Fixes#34807.
Some cases were not handled properly for Polygon2D after making changes in common code to fix Line2D antialiasing. Added an option for drawing polygons to differentiate the two use cases.
Fixes#34568
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
* Adds range hint for integer properties
* Adds missing descriptions in documentation
* Updates some method descriptions to match the actual behavior
* Fixes second param name of `set_item_icon_transposed` from `rect` to `transposed`
This moves it to be closer to the sliders, which in turn makes it easier
for the user to preview the color.
This also makes it clearer that the Pick button can only pick colors
in the editor window, not outside.
The different Rect used to draw rings were wrongly calculated when anti-aliasing was enabled. Also getting rid of some overlapping glitches when using transparent colors for the filling or borders.
Fixes#34104
See https://github.com/godotengine/godot/pull/23658#issuecomment-562706669
The method was implemented back when Dictionary.get(key, default) did not
exist, but now that it does we do not need a custom method in CharFXTransform.
It's a new feature in 3.2, so does not break compat with 3.1.x.
Popup menus longer than the viewport have stange behaviors before this
fix:
* They always have one pixel outside the viewport.
* You can scroll down the long menu even if bottom outside screen and
top inside the screen. (Only menus one pixel above the screen is limited
to scroll down.)
In the 3D version:
- Partially revert #20908 that was reverted in the 2D version as part
of #21653. This ensures that the Vector returned is always perpendicular
to the surface collided with; and not the floor_normal Vector passed to
the function when on a floor.
- Include an update of the floor velocity before multiplying by the time
delta, which was added to the 2D version as part of commit 13a8014.
In the 2D version:
- Use the Vector2.slide() function instead of Vector2.tangent() to adjust
the amount of motion the stop_on_slope undoes to ensure that it is in the
right direction. This is a implementation of the 3D approach from #30588.
- Combine the !found_collision and motion == Vector2() checks for break.
- Other minor formating changes to make the functions look identical.
Also renamed some variables to align with their use.
It was triggering a warning in bullet followed with a crash in some cases.
WARNING: assert_no_constraints: A body with a joints is destroyed. Please check the implementation in order to destroy the joint before the body.
At: modules/bullet/rigid_body_bullet.cpp:465
This change allows travel() to be called on AnimationNodeStateMachinePlayback during _ready(), before the start node has been processed and the state machine is considered playing.
When own_world property is set, the viewport stores a unique resource for the world. With this change it keeps being updated from changes made to the world property instead of storing a default empty world with environment settings that can't be modified.
Fixes#23412
Polygon2D:
The property wasn't used anymore after switching from canvas_item_add_polygon() to canvas_item_add_triangle_array() for drawing.
Line2D:
Added the same property as for Polygon2D & fixed smooth line drawing to use indices correctly.
Fixes#26823
This wasn't a very good idea as it puts too strict requirements on how
to set `min` and `max` values. For example, since the default min and
max are 0 and 100, this triggers an error:
```
set_min(256)
set_max(16384)
```
Since `min` will be higher than `max` temporarily. It can be worked
around by setting max first, but it's not really intuitive. I'll relax
the requirement as it's only a problem in `get_as_ratio`, which already
has a check.
Fix another min == max occurrence.
It will now raise an error whenever this happens so that we can fix
these situations. `max == min` is not allowed as it could lead to
divisions by zero in ratios, and `max < min` doesn't make much sense.
Fixes#33907.
get_combined_minimum_size() must be used in order to consider the min size
specified by the user when determining how far the left/top edge is allowed
to move. Otherwise the dialog may think it can shrink further than it
should, causing the right/bottom edge to move when the rect size is fixed in
set_size().
This allows setting the `read_chunk_size` of the internal HTTPClient.
This is important to reduce the allocation overhead and number of file
writes when downloading large files, allowing for better download speed.
This change allows StyleBox preview to take shadows and content margins into account to display how a whole panel would be rendered.
The preview control clips contents so that in any case it doesn't bleed on controls around.
Fixes#33801
Causes unnecessary computations and drawing, and a division by zero when calculating uv coordinates.
This case happened with ScriptEditor's member overview (ItemList), initialized with a minimum width of 0.
Fixes#33634
A new external MSAA setting was introduced in https://github.com/godotengine/godot/pull/33518
that fixed issues on GLES2 and Oculus Mobile VR. To avoid misunderstanding it was suggested
by @BastiaanOlij and discussed on discord to rename it to AndroidVR.
Rémi Verschelde
PouleyKetchoupp
azagaya
Morris Tabor
Marcel Admiraal
Yuri Sizov
megalobyte
Hugo Locurcio
Haoyu Qiu
lawnjelly
Rémi Verschelde
Fabio Alessandrelli
Leonardo Christino
Lightning_A
Lynx
amor
TwistedTwigleg
trollodel
phil-shenk
kleonc
QbieShay
Sonoracpp
John Wigg
Pedro J. Estébanez
Brennen Green
Will Whitty
Eoin O'Neill
kobewi
Tokage
besh81
Gilles Roudière
rafallus
clayjohn
Koala
MaxStgs
floppyhammer
David Hoppenbrouwers
univeous
Lyuma
Rafał Mikrut
asheraryam
Johannes
ray90514
JFonS
smix8
Yuri Roubinsky
bruvzg
Kevin Smith
volzhs
Bastiaan Olij
lupoDharkael
Nathan Franke
jmb462
Justin Ho
Crystal Melting Dot
Kongfa Waroros
Pop0p
abaire
sps1112
Angad Kambli
janglee
Pedro Rodrigues
Michael Alexsander
Zak
Eryk Dwornicki
Mateo Kuruk Miccino
Delf Neumärker
hilfazer
Eric M
Meriipu
Emmanuel Leblond
Jummit
Christoffer Sundbom
nc
Ellen Poe
Hein-Pieter van Braam
Jitesh
andybarcia
hoontee
Filip
Kanabenki
Oliver Dick
Kayomn
muiroc
Volka
Azamat Nabiullin
Nils Reid
HipsterPenguin
Sergey Minakov
Alexander Pech
Andrii Doroshenko (Xrayez)
Dominik 'dreamsComeTrue' Jasiński
rileylyman
FIF15
greenfox
Eric Tuvesson
Gabriel Van Eyck
Juan Linietsky
Duroxxigar
Dashcell
lolligerjoj
Danil Alexeev
D00T24
Jonathan Vice
HellonLegs
booer
Ryan Roden-Corrent
Somnath Sarkar
mvl
Wilson E. Alvarez
Fredia Huya-Kouadio
Tony-Goat
Cheeseness
Umang Kalra
Martin Capitanio
ConorLPBoyle
Daniel Ting
Chistpohe LY
Yerik
Patrick Dawson
Maganty Rushyendra
ArrowInAKnee
Andrés Botero
lrgilbert
lordkettune
Mark Kuo
Thakee Nathees
Adam Reichold
Stijn Hinlopen
Andy Maloney
Ranoller
Lisandro Lorea
Thibault Truffert
Giuliano Barberi
Marcus Brummer
SkyJJ
smartin015
etienne.frank
Eduardo Nunes Pereira
nobuyuki_nyuu
Stanislav Labzyuk
Thomas Riedmair
jitspoe
Revan Ji
Darenn
Sam
Bojidar Marinov
John Wigg
Andrea Catania
theludovyc
Guilherme Felipe
Leleat
MickeMakaron
Zak Grumbles
Waridley
qarmin
Gil Arasa Verge
nathanwfranke
Rasmus Vermeulen
simpuid
Darren Kaste
Ev1lbl0w
Pierre Caye
fhuya
Juan Linietsky
Eevee
WARIO-MDMA
bitstopper
zxcvdev
sumit0190
Eric Rybicki
Georg Wacker
TrevorPeyton
Bruno Lourenço
Ricardo Buring
malbach
Paulb23
Jóhannes Gunnar Þorsteinsson
Ben Hickling
OverloadedOrama
Krystof Klestil
William Tumeo
wingedadventurer
Joost Heitbrink
fossegutten
SIYU FU
Александр Растриженков
Jonas Bernemann
Tyler Greenwood
Mikolaj Kaczmarek
Vitalii Shmorhun
jitspoe
Aaron Franke
allkhor
x2f
James Buck
PtrMan
Holger Dammertz