`fps` has been turned into `speed_scale`. It now affects the scale of the entire animation. If `speed_scale` is a negative value, the animation is played in reverse.
`frame_n/delay_sec` has been renamed to `frame_n/duration` _(prefixes exist, making the previous name redundant)_.
Setters and getters, documentation updated, too.
- Tabs and MenuButton for mode selection and enabling/disabling colorized sliders
- MenuButton for shape selection with new icon for each shape
- Drag and drop functionality for presets to arrange order
- A chronological list of recently selected presets which are global for the editor
- Presets are now highlighted as being active or inactive
- Thicker sliders for easy targeting
- `grabber_offset` theme constant for Slider
- Uncolorized sliders
"less" should be used for quantity, rather than "lesser".
Existing scripts that use `or_lesser` in `_get_property_list()`
will need to be updated to account for this change.
Values lower than 1.0 can be used to make the fog rendering not fully
obstruct the sky. This can be desired when using fog as a purely
atmospheric effect, without intending to use fog for open world fog
fading.
When set to 0.0, fog rendering behavior will be similar to Godot 3.x
where sky rendering was never affected by fog.
This allows light sources to be specified in physical light units in addition to the regular energy multiplier. In order to avoid loss of precision at high values, brightness values are premultiplied by an exposure normalization value.
In support of Physical Light Units this PR also renames CameraEffects to CameraAttributes.
Affects a lot of classes. Very thoroughly checked signal connections and deferred calls to this method, add_do_method/add_undo_method calls, and so on.
Also renames the internal `_update_callback()` to `_redraw_callback()` for consistency.
Just a few comments have also been changed to say "redraw".
In CPUParticles2D, there was a private variable with the same name. It has been renamed to `do_redraw`.
Make `resource_local_to_scene` behave as described in the documentation. (If I understand correctly, the following **instance** refers to **the instance of the sub-scene**.)
2e24b76535/doc/classes/Resource.xml (L70-L72)
If the resources of the sub-scene are modified in the main scene, the modified resources will be recorded in the `tscn` file of the main scene. And the root node of the sub-scene will be set twice.
1. In the main scene, when encountering a sub-scene, the sub-scene will be initialized first;
2. Then use the resources in the main scene to reset the root node of the sub-scene.
This may make `resource_local_to_scene` not work as expected. The resources cannot be shared between the sub-scene root node and other ordinary nodes in the sub-scene.
Yes, if the resources have `resource_local_to_scene` enabled, this patch treats the modified resources of the sub-scene root node as resources in the sub-scene, not in the main scene. Although the modifications are recorded in the `tscn` file of the main scene.
This can be used to make particles disappear when colliding, rather
than bouncing around or sticking to surfaces.
This is useful for rain particles which should not be able to go
through floors/ceilings, but shouldn't stick to surfaces either.
`shader_uniform` is now consistenly used across both per-shader
and per-instance shader uniform methods. This makes methods easier
to find in the class reference when looking for them.
- Change Tree's drop_position_color from orange to white.
- Change ItemList's guide_color to the same color as Tree's, which fits in with a dark theme better.
- Add `positive_only` property hint to disallow using negative presets.
These values are clamped in several places in the editor already,
so this avoids displaying presets that don't work.
- Move the Zero preset at the end of the positive list to match
the custom property editor. It's also used less often than Linear,
Ease In and Ease Out.
- Rename presets to be consistent between the easing property editor
and custom property editor.
- Remove unused `inout` hint which was redundant since it was already
the default.
- Increase the default non-volumetric fog density to 0.01 to make
adjustments more visible.
- Use a less saturated non-volumetric fog color by default
(a mix of the sky and horizon colors of the new default
ProceduralSkyMaterial).
- Set Volumetric Fog Gi Inject to 1.0 by default. Injecting GI results
in more realistic appearance of volumetric fog, at a very low
performance cost.
This makes the default behavior consistent between SpriteBase3D,
BaseMaterial3D and imported glTF scene materials.
Alpha scissor threshold property hints now allows for more precise
adjustments as well.
The properties for which the `notify_property_list_changed()` call were removed, had issues with caret placing and tab navigation.
Since other node editors do not call this notify on all setters, it is assumed that removing them on certain fields should not impair any functionality.
See f.e. navigation_mesh.cpp `set_source_group_name` vs `set_source_geometry_mode`.
Solves #63549
- Adds more customization options to ProjectSettings.
- Displays navregion edge connections and navigation polygon edges in editor and at runtime.
- Majority of debug code moved from SceneTree to NavigationServer.
- Removes the irritating debug MeshInstance child node from NavigationRegion3D and replaces it with direct RenderingServer API.
- RPC configurations are now dictionaries.
- Script.get_rpc_methods renamed to Script.get_rpc_config.
- Node.rpc[_id] and Callable.rpc now return an Error.
- Refactor MultiplayerAPI to allow extension.
- New MultiplayerAPI.rpc method with Array argument (for scripts).
- Move the default MultiplayerAPI implementation to a module.
Based on #62896, only implements the BPM support part.
* Implements BPM support in the AudioStreamOGG/MP3 importers.
* Can select BPM/Bar Size and total beats in a song file, as well as edit looping points.
* Looping is now BPM aware
* Added a special importer UI for configuring this.
* Added a special preview showing the audio waveform as well as the playback position in the resource picker.
* Renamed `AudioStream::instance` to `instantiate` for correctness.
* Moved preprocessor to Shader and ShaderInclude
* Clean up RenderingServer side
* Preprocessor is separate from parser now, but it emits tokens with include location hints.
* Improved ShaderEditor validation code
* Added include file code completion
* Added notification for all files affected by a broken include.
This PR is a continuation of #50381 (which was implemented exactly a year ago!)
* Add a visual interface to select which classes should not be built into Godot (well, they are built if something else uses them, but if not used the optimizer will remove them out).
* Add a detection system to scan the project and figure out the actual classes used.
* Added the ability for SCons to load build profiles.
Obligatory Screen:
A simple test with a couple of nodes in the scene resulted in a 25% reduction for the final binary size
TODO:
* Script languages need to implement used class detection (left for another PR).
* Options to disable servers or server functionalities (like 2D or 3D physics, navigation, etc). Are missing, that should also greatly aid in reducing binary size.
* Options to disable some modules would be desired.
* More options to disable drivers (OpenGL, Vulkan, etc) would be desired.
In general this PR is a starting point for more contributors to improve and enhance this functionality.
And finally remove the 'frames' property which was added for compatibility with 2.1
in bed3efb17e.
Fixes#21765.
The 'animations' property on the other hand is needed, contrarily to what its comment
said (copy-paste mistake probably).
Also removes unused '_get_animation_list'.
Fixed an infinite loop caused when given page size is too small to store anything.
If, in the first step of compression, we attempt a rollback, we end up calling LocalVector::resize with AnimationCompressionDataState::validated_packet_count which is -1. This resize function takes a uint, and there's a bitshift operation that assumes that by bitshifting enough times, we'll reach a number greater than or equal to the requested memory amount, which we'll never do for uint(-1), and this causes an infinite loop.
To fix, I'm adding an early failure in case the given page size isn't enough.
This PR implements:
* A new hint: PROPERTY_HINT_NODE_TYPE for variant type OBJECT, which can take specific node types as hint string.
* The editor will show it as a node path, but will set it as a pointer to a node from the current scene if you select a path.
* When scene is saved, the node path is saved, then restored as a pointer.
NOTE: This is a proof of concept and this approach will most likely not work. The reason if that, if the node referenced is deleted, then when trying to edit this the node will become invalid.
Potential workarounds: Since this uses the Variant API, it should obtain the pointer from the Variant object ID. Yet, this would either only really work in GDScript or it would need to be implemented with workarounds in every language.
Alternative ways to make this work: Nodes could export an additional property with a node path (like for which_node, it could be which_node_path).
Another alternative: Path editing could happen as a hidden metadata (ignoring the pointer).
* Ensures thread safety when resources are destroyed.
* Simplified API by always forcing `ResourceCache::get_ref`, which needs less hacks and is fully thread safe.
* Removed RWLock for resources because its not possible to use for the new logic. Should not be a problem.
Supersedes #57533
Clean up and do fixes to hash functions and newly introduced murmur3 hashes in #61934
* Clean up usage of murmur3
* Fixed usages of binary murmur3 on floats (this is invalid)
* Changed DJB2 to use xor (which seems to be better)
These spaces are not needed for the file to be successfully parsed.
Other types such as Vector3 are no longer serialized with spaces
after the opening parenthesis and before the closing parenthesis,
so this is also more consistent.
Fix mistake making `set_custom_format` impossible to use.
Automatically forward custom flags in `SurfaceTool.commit`.
Add documentation in `SurfaceTool` and `Mesh` for custom channels.
Deprecate `SurfaceTool.generate_lod` and expose `ImporterMesh.generate_lods`.
Nearest-neighbor filtering of the heightmap results in a broken
appearance, with and without Deep Parallax enabled on the material.
Linear filtering results in a more expected appearance. This does
not affect other texture maps such as albedo, normal or roughness.
Match NavMap and ProjectSettings with NavigationMesh defaults since the NavMap edge merging requires a matching cell_size with the NavigationMesh to create connections without issues.
This is more consistent with other BaseMaterial properties such as
`ao_texture_channel`.
This also improves the documentation related to
`albedo_texture_force_srgb`.
This also fixes a typo in the 3.x material converter.
* Add a button to add properties (which lets you select node and property)
* Add ability to drag properties and drop them to the editor.
* Made the editor transient (not always visible on the bottom) since its not needed most of the time.
* Added the ability to pin the editor, in case dragging properties from other nodes is desired.
* Replace case-by-case extraction with PNAME & GNAME
* Fix group handling when group hint begins with property name
* Exclude properties that are PROPERTY_USAGE_NO_EDITOR
* Extract missing ADD_ARRAY*, ADD_SUBGROUP* macros
Lowers or removes the slider limits and steps from NavigationMesh resources and changes some default values to better work with realistic unit sizes by default.
Adds warnings when at least one of the input mesh surfaces is of wrong primitive type or has an empty vertex / index array as those broken input meshes would fail as both navmesh as well as later when creating debug meshes.
Implements a method `mark_dirty` in Curve2D and Curve3D like the one
that already exists in Curve, it's a convenient way to set
`baked_cache_dirty` to `true` and also emit the `changed` signal.
- Fix a bug causing an error message when a scene containing an AnimationPlayer with a reset track is saved, by correctly referencing the temporary "default" library.
- Make library dropdown in new animation window assign correct library when creating an animation.
- Similarly allow choice of library when duplicating animation.
- Make library dropdown default to library of currently selected animation.
- Make library dropdown show when exactly one library exists, and it isn't [Global]. Include [Global] on the dropdown in this case (will be newly created if dialog is confirmed).
- When appending (x) to avoid New Anim name collisions, correctly check target library instead of [Global].
- Add parentheses when appending x when duplicating animations in the library editor, for consistency.
- Change titles and prompts to be distinct in name/rename/duplicate dialiogs.
- Fix bug in OprionButton.get_selectable_item(true) when last is not selectable.
- Fix issues where animation wasn't found on deletion/rename by correctly prepending library name.
- Remove an extraneous print_line from animation_track_editor.
- Add messages to errors when an animation isn't found.
While default ReCast library has support for 0.0 'sample_distance' the Godot implementation does not an crashes.
Previously Godot would set all sample_distance values below 0.9 to 0 which causes the crashes.
This limits the sample_distance range selection to 0.1 - 16.0 and also clamps sample_distance that are below 0.1 before ReCast receives them.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
Implemented by request of @neikeq to advance in the GDExtension version of Mono.
* If a Resource type is missing upon load, it will be remembered together with its data (Unless manually overriden).
* If a Node type is missing upon load, it will be also be remembered together with its data (unless deleted).
This feature makes working with GDExtension much easier, as it ensures that missing types no longer cause data loss.
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
* Placeholder textures
* Placeholder meshes
* Placeholder material
This PR is the first step towards implementing https://github.com/godotengine/godot-proposals/issues/2756
It adds an asset type that uses no resources, which can be used to replace the existing ones on export for using on the upcoming server export.
Convert method signature parameters to const where it is possible
# Conflicts:
# drivers/gles3/rasterizer_canvas_gles3.cpp
# drivers/gles3/rasterizer_canvas_gles3.h
# editor/plugins/animation_state_machine_editor.cpp
# editor/plugins/animation_state_machine_editor.h
Implements https://github.com/godotengine/godot-proposals/issues/4096
* Nodes can be marked unique to the scene in the editor (or via code).
* Unique nodes can be accessed via the **%** prefix at any point in the path. From that point in the path (depending on whether the scene of the path is), the unique node will be fetched.
* Implementation is very optimal, as these nodes are cached.
Add "generate_mipmap" font import option.
Add some missing features to the Sprite3D.
Move BiDi override code from Control to TextServer.
Add functions to access TextServer font cache textures.
Add MSDF related flags and shader to the standard material.
Change standard material cache to use HashMap instead of Vector.
* Instead of containing single animations, AnimationPlayer now contains libraries.
* Libraries, in turn, contain the animations.
This paves the way for implementing the possibility of importing scenes as animation libraries, finally allowing to import animations separate from the 3D models.
Missing (will be done on separate PRs):
* Make it possible to import scenes (dae/fbx/gltf) as animation libraries.
* Make it possible for AnimationTree to import animation libraries on its own, so it does not rely on AnimationPlayer for everything.
- improved mesh data calculation from standalone static colliders so that no
VisualServer calls are performed - and thus no VS mutexes need to
be locked in case of on-thread baking
- improved the same for GridMap's static colliders
* Resource that allows saving textures embedded in scenes or standalone.
* Supports only formats that are portable: Lossy, Lossles or BasisUniversal
This is something I wanted to add for a long time. I made it now because @fire
requires it for importing GLTF2 files with embedded textures, but also this
will allow saving Godot scenes as standalone binary files that will run
in all platforms (because textures will load everywhere).
This is ideal when you want to distribute individual standalone assets online
in games that can be built from Godot scenes.
SConstruct change also makes it possible to outright delete the `editor`
folder in a `tools=no` build, which we use in CI to ensure no invalid
cross-dependencies are added.
The new `edit/loop_mode` import options lets user choose to either:
- Detect loop points from the WAV (default, same behavior as before)
- Set the loop mode and loop points manually like in AudioStreamSample
Fixes#46164.
`DirAccess *` needs to be deleted manually, and this is often forgotten
especially when doing early returns with `ERR_FAIL_COND`.
`DirAccessRef` is deleted automatically when it goes out of scope.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
* Previous "virtual" classes (which can't be instantiated) are not corretly named "abstract".
* Added a new "virtual" category for classes, they can't be instantiated from the editor, but can be inherited from script and extensions.
* Converted a large amount of classes from "abstract" to "virtual" where it makes sense.
Most classes that make sense have been converted. Missing:
* Physics servers
* VideoStream
* Script* classes.
which will go in a separate PR due to the complexity involved.
* Its not and will not be used for streaming.
* Streaming will be implemented in 4.1 and it will work different.
* It makes more sense to be called CompressedTexture since it imports and compresses texture files.
This makes it possible to create more aesthetically pleasing
styleboxes for GUI theming, especially in games that have
a futuristic appearance (where skewed buttons and progress bars
are common).
The value is already clamped in the editor, but it wasn't being
clamped when the value was set via code. Values outside the [0.0; 1.0]
range can result in broken rendering.
This brings PhysicalSkyMaterial's Night Sky functionality to
ProceduralSkyMaterial, but in a more powerful and general fashion.
This can be used to display stars at night, or clouds at day and night.
For clouds, it won't be physically accurate, but it can look good still.
The Sky Cover Modulate property can be used to adjust the sky cover's
colors and opacity in real-time, which is useful for day/night or weather
transitions.
- Tweak colors to be less saturated and more balanced (in terms of hue).
The cool blue sky is balanced by a warm brown ground,
which makes reflections look closer to how they'd look like when using
an HDRI panorama texture.
- Make the ground color dark on both ProceduralSkyMaterial and
PhysicalSkyMaterial to reduce indoor light leaking, especially
when using GI.
- Tweak the PhysicalSkyMaterial colors to be as close as possible
to ProceduralSkyMaterial (with the default sun orientation).
- Tweak editor environment defaults to be identical to the default
ProceduralSkyMaterial colors. Previously, the default editor sky
color was different from the colors of a newly created
ProceduralSkyMaterial resource.
Both new skies were tested without GI, with SDFGI and with VoxelGI.
They were tuned to look best when using ACES tonemapping with a
whitepoint set to 6, but they still look good with other
tonemapping operators.
This makes radiance map updates much faster, which improves performance
when rotating the sun in the editor or at run-time.
This real-time filter is also much less prone to "fireflies" that can
appear when using a sky with a bright sun.
This reverts commit a988fad9a0.
As discussed in #57725 and clarified in #57788, `SNAME` is not meant to be used
everywhere but only in critical code paths. For theme methods specifically, it
was by design that only getters use `SNAME` and not setters.
Improvements:
* Occluder3D is now an abstract type inherited by: ArrayOccluder3D, QuadOccluder3D, BoxOccluder3D, SphereOccluder3D and PolygonOccluder3D. ArrayOccluder3D serves the same purpose as the old Occluder3D (triangle mesh occluder) while the rest are primitives that can be used to manually place simple occluders.
* Occluder baking can now apply simplification. The "bake_simplification_distance" property can be used to set a world-space distance as the desired maximum error, set to 0.1 by default.
* Occluders can now be generated on import. Using the "occ" and "occonly" keywords (similar to "col" and "colonly" for colliders) or by enabling on MeshInstance3Ds in the scene's import window.
Fixes:
* Fixed saving of occluder files after bake.
* Fixed a small error where occluders didn't correctly update in the rendering server.
Bonus content:
* Generalized "CollisionPolygon3DEditor" so it can also be used to edit Resources. Renamed it to "Polygon3DEditor" since it was already being used by other things, not just colliders.
* Fixed a small bug in "EditorPropertyArray" where a call to "remove" was left after the "remove_at" rename.
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
- Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.
- Reorder the Y scale enum to go from the lowest Y scale to the highest.
Also rename the "Disabled" setting to "100%" for clarity.
This improves rendering performance noticeably, especially when the
camera moves fast.
On a medium-sized test scene on a GTX 1080 in 2560×1440, going
from 6 to cascades saves 0.5 ms of frame time while looking visually
identical (as most of the scene fits within the 4 cascades).
Initial implementation of the MultiplayerReplicationInterface and its
default implementation (SceneReplicationInterface).
New MultiplayerSpawner node helps dealing with instantiation of scenes
on remote peers (e.g. clients).
It supports both custom spawns via a `_spawn_custom` virtual function,
and optional auto-spawn of known scenes via a TypedArray<PackedScenes>
property.
New MultiplayerSynchornizer helps synchronizing states between the local
and remote peers, supports both sync and spawn properties and is
configured via a `SceneReplicationConfig` resource.
It can also sync via path (i.e. without being spawned by a
MultiplayerSpawner if both peers has it in tree, but will not send the
spawn state in that case, only the sync one.
Larger sizes take up a lot of memory for little visual benefit.
They also take a while to initialize, which makes the inspector slow
to refresh when the texture needs to be regenerated.
This provides better usability when a GradientTexture or CurveTexture
is added to a Control node.
Visual appearance of most GradientTextures and CurveTextures will
be unaffected.
A common source of errors is to call functions (such as round()) expecting them to work in place, but them actually being designed only to return the processed value. Not using the return value in this case in indicative of a bug, and can be flagged as a warning by using the [[nodiscard]] attribute.
The new default project theme uses StyleBoxFlat extensively for
a more modern design and better scalability to multiple resolutions.
SVG icons are now used in place of PNG icons. While this does not
allow for true vector-based icon drawing (icons are still rasterized
at load-time), this makes the design work easier for contributors
and opens the door to vector drawing in the future (e.g. with polygons
or SDFs).
Like for editor icons, the SVG header file is now built automatically
when a SVG file is changed. This removing the need for running
`make_header.py` manually (TODO).
The "Use Hidpi" project setting has been removed in favor of a
"Default Theme Scale" project setting, which allows creating the
default theme at a higher/lower scale than the default.
This can be used when designing GUIs with a high base resolution
to ensure crisp visuals.
Co-authored-by: Yuri Sizov <yuris@humnom.net>
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
Fix "Fill" alignment processing wrong side of the text if overrun trim was applied.
Improve "Fill" alignment to avoid adding excessive subsequent spaces or elongations.
Add font detection to the overrun, to correctly add ellipsis (was using last glyph font, which doesn't necessary have dot character).
Improve line breaking to avoid adding excessive subsequent soft break points for languages without word separator.
Port missing overrun/justification code to the Fallback text server.
Fix inferred text direction detection by controls.
Add tests for "Fill" alignment and line breaking glyph flags.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
Values below 0.5 will cause constant flickering in most situations,
and values above 0.99 take a very long time to fully update
(10+ seconds at high framerates).
Helps with discovery and setup of physics solver settings, in a specific
project settings section for both 2D and 3D.
Other changes for cleanup:
-Removed unused space parameters in 3D
SPACE_PARAM_BODY_ANGULAR_VELOCITY_DAMP_RATIO
SPACE_PARAM_CONSTRAINT_DEFAULT_BIAS
-Added custom solver bias for Shape3D (same as Shape2D)
-Improved documentation for solver settings
The message about SpatialMaterial conversion was turned into a warning,
as it can potentially interfere with porting projects from Godot 3.x
(if there's a bug in the conversion code).
- Replaced unused code related to old close icon with a button
- Add bezier handle options to right-click menu
- Remove mirror handle mode, only keep balanced
- Update animation reference
This makes material setup faster and avoids mistakes, especially with
the metallic channel which defaults to 0.
The value is only changed when adding a texture when none was
previously assigned, not when assigning a different texture.
Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Damping values are now non-negative.
Add new properties linear_damp_mode and angular_damp_mode to set the way
RigidDynamicBody and PhysicalBone (2D & 3D) use damping values.
It can now be Combine (default) to add to the default/areas, or Replace
to override the value completely (current behavior).
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
Roughly based on https://github.com/godotengine/godot-proposals/issues/3375 (used format is slightly different).
* Implement bitwidth based animation compression (see animation.h for format).
* Can compress imported animations up to 10 times.
* Compression format opens the door to streaming.
* Works transparently (happens all inside animation.h)
* New track type BLEND_SHAPE
* Blend shapes are imported via this new track type
* Processing is more optimized (no longer relies on variants)
* Modified the Blend Shape API in MeshInstance3D to use indices rather than StringNames (more optimizes)
* Promo: Fixed a small bug in gizmo updating in Node3D that affected performance
Dedicated BlendShape tracks are required for both optimization and eventually implementing them in animation compression.
* New plugin system to control the whole import workflow
* Can add options and run code at every import step (general, per node, mesh, animation, material etc.)
This constitutes a first version of these plugins. The ability to interact with the import preview dialog will likely be added later on.
* Animations and Skeletons are now pose-only.
* Rest transform is kept as reference (when it exists) and for IK
* Improves 3D model compatibility (non uniform transforms will properly work, as well as all animations coming from Autodesk products).
* `Animation.TYPE_TRANSFORM3D` track is gone.
* Added POSITION_3D, ROTATION_3D, SCALE_3D tracks.
* GLTF2, Collada, FBX importers will only import the track types found.
* Skeleton3D bone poses are now Pos/Rot/Scale, pose matrix removed.
* AnimationPlayer and AnimationTree animate these tracks separately, only when found.
* Removed BakeReset code, is useless with these changes.
This is the first in a series of commits designed to make the animation system in Godot more useful, which includes:
* Better compatibility with Autodesk products
* Better reusability of animations across models (including retargeting).
* Proper animation compression.
* etc.
*Note* GLTF2 animation saving went broken with this PR, needs to be fixed in a subsequent one.
This property was intended to provide a way to have SSAO or VoxelGI
ambient occlusion with a color other than black. However, it was
dropped during the Vulkan renderer development due to the performance
overhead it caused when the feature wasn't used.
When packing a scene node which is not the root, errors where caused
by internal checks in is_editable_instance method.
This check can be safely made outside instead.
`core` and `scene` shouldn't depend on `editor`, so they can't query this style
setting in `get_argument_options`. But we can handle it after the fact in
GDScript's completion code.
Also cleans up a couple extra unused invalid includes in `core`.
Convert GLTF Document to use ImporterMeshInstance3D.
Add a GLTFDocument extension list and an extension for converting the importer mesh instance 3d to mesh instance 3d.
Use GLTF module when the editor tools are disabled.
Modified the render server to be less restrictive on matching blend arrays and have more logging.
Misc bugs with multimesh.
Always index the meshes.
Fixes#43733: "creating SpatialMaterial in a separate thread creates invalid
shaders (temporarily)."
The bug occurred because various setters called in materials' constructors add
materials to queues that are processed on the main thread. This means that
when the materials are created in another thread, they can be processed on the
main thread before the constructor has finished.
The fix adds a flag to affected materials that prevents them from being added
to the queue until their constructors have finished initialising all the
members.
Add glTF2 uri decode for paths.
Add vertex custom apis.
Add scene importer api.
Change Color to float; add support for float-based custom channels in SurfaceTool and EditorSceneImporterMesh
Co-authored-by: darth negative hunter
<thenegativehunter2@users.noreply.github.com>
With this PR it's possible to add a collision during the Mesh import, directly in editor.
To generate the shape is possible to chose between the following options:
- Decompose Convex: The Mesh is decomposed in one or many Convex Shapes (Using the VHACD library).
- Simple Convex: Is generated a convex shape that enclose the entire mesh.
- Trimesh: Generate a trimesh shape using the Mesh faces.
- Box: Add a primitive box shape, where you can tweak the `size`, `position`, `rotation`.
- Sphere: Add a primitive sphere shape, where you can tweak the `radius`, `position`, `rotation`.
- Cylinder: Add a primitive cylinder shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
- Capsule: Add a primitive capsule shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
It's also possible to chose the generated body, so you can create:
- Rigid Body
- Static Body
- Area
At runtime, packed scenes with nodes marked as editable instance where
saved with node type tags, which prevented the scene to be then loaded
as an instance, causing duplicated nodes in the tree.
This change ensures nodes marked as editable instances and their owned
children are properly set as instances.
That doesn't make a difference in the editor, since such nodes where
already set as instances based on their instance state, but it helps
at runtime where instance states are disabled.
Co-authored-by: latorril <latorril@gmail.com>
Fixes shear effect with `BILLBOARD_FIXED_Y` when the camera is rotated around the z-axis by rotating the mesh correctly into view space.
Also removes shearing effects that occur when rotating the mesh by excluding the model rotation and scale from the billboard matrix.
This commit adds quite a chunk of modifications to particles
- particle (value + randomness) now use min and max instead
- passing a curveXYZtexture is now possible and will scale particles per-axis
- CPUParticle3D have an optional parameter to split the scale curve per-axis
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
While calculating interpolated points, intervals between two baked
points has been assummed to be `baked_interval`. The assumption could
cause significant error in some extreme cases (for example #7088).
To improve accuracy, `baked_dist_cache` is introduced, which stores
distance from starting point for each baked points. `interpolate_baked`
now returns exact linear-interpolated position along baked points.
Capsule height and radius setters can modify each other, rather than
using clamping, to avoid cases where values are not set correctly when
loading a scene (depending on the order of properties).
Inspector undo/redo:
Added the possibility to link properties together in the editor, so
they can be undone together, for cases where a property can modify
another one.
Gizmo undo/redo:
Capsule handles pass both radius and height values so they can be undone
together.
This comment is useful to determine the origin of ShaderMaterials
converted from built-in material types (such as CanvasItemMaterial
or StandardMaterial3D).
The Godot version is also included in case the shader needs to be
regenerated with a newer engine version.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
This PR and commit adds the functionality to arrange nodes in VisualScript/VisualShader editor. The layout generated by this
feature is compact, with minimum crossings between connections
& uniform horizontal & vertical gaps between the nodes.
This work has been sponsored by GSoC '21.
Full list of additions/changes:
• Added arrange_nodes() method in GraphEdit module.
• This method computes new positions for all the selected
nodes by forming blocks and compressing them.
The nodes are moved to these new positions.
• Adding this method to GraphEdit makes it available for
use in VisualScript/VisualShaders editors and its other
subclasses.
• Button with an icon has been added to call arrange_nodes() in GraphEdit.
• This button is inherited by VisualScript/VisualShaders editors
to invoke the method.
• Undo/redo is functional with this method.
• By using signals in arrange_nodes(), position changes are registered
in undo/redo stack of the subclass that is using the method.
• Metadata of the method has been updated in ClassDB
• Method description has been added to class reference of GraphEdit
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
* Friendlier with version control.
* Generates pseudo unique IDs, to minimize conflicts when merging, but still
user readable (so, not UUID).
* Eventually will also allow to have more precisely named sub-resources in
imported files.
* This will allow better reloading on changes (including resources already
loaded) as well as better keeping track of changes on the DCC.
* Keeps backward compatibility with the old formats.
* Binary and text format version incremented to mark breakage in forward
compatibility.
* Create the shader on demand.
* Makes sure compilation happens only once, then shader is cached.
* Speeds up scene loading times.
* Speeds up editor initialization.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
Neither name is a perfect match but `Curve3Texture` looked too similar to
`CurveTexture` and `Curve3D`, which made things confusing when picking a
texture type or browsing the API reference.
and 3D CPU particles. The new emitter is called "ring"
and it can emit either in a ring or cylinder fashion.
This adds the following properties for the emitter:
1. emission_ring_axis: the axis along which the ring/cylinder
will be constructed
2. emission_ring_radius: outer radius of the ring/cylinder
3. emission_ring_inner_radius: inner radius of the cylinder.
when set to zero, particles will emit in the full volume.
4. emission_ring_height: height of the ring/cylinder emitter.
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
This prevents setting too large values and crashing the editor.
Very low values are also no longer allowed since they are generally
not detailed enough to represent complex gradients, leading to confusion.
Previously, only StandardMaterial3D could be defined as an alternative
to ShaderMaterial.
This also reorders the CanvasItemMaterial property hints to follow
alphabetical order (which is enforced by the inspector).
* This was required by users in some scenarios, such as animating individual axes over time with a single texture.
* Examples: Shaders, Particles, etc.
* CurveTexture now defaults to RGB, can be changed to Red if needed, this allows to freely exchange them.
* Colors were imported as 16BPP (half float)
* Far most common use cases only require 8BPP
* If you need higher data precision, use a custom array, which are supported now.
**WARNING**: 3D Scenes imported in 4.0 no longer compatible with this new format. You need to re-import them (erase them from .godot/import)
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
The CylinderMesh generation code handles this special case and
avoids generating the top and bottom faces if their radius is equal
to 0. This improves performance by reducing the number of vertices
to draw.
If both values are set to 0, nothing will be visible but the mesh
generation will still succeed.
This also improves the CylinderMesh class documentation.
Regression fix: update_exports is tool only and should be used only in
the editor, otherwise it can cause export variable overrides from
instances to be discarded in favor of the parent's value.
* Renames for 2D and 3D
* Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility.
* New name makes it clear that this is about visibility on screen.
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
The subindex within Resource wasn't synchronized with the path stored
in cache when saving a packed scene. It could cause sub-resources to be
swapped when loading the same packed scene in the same session.
Now the subindex in Resource reflects the sub-resource path in cache,
making saving and loading sub-resources consistent.
Co-authored-by: latorril <latorril@gmail.com>
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
YSort now has a compatibility alias to Node2D.
Updated TileMap to use the existing Node2D y_sort_enabled property instead
of its own property.
Updated Node2D doc to include the new y_sort_enabled member.
Updated TileMap doc to remove its mention of cell_y_sort.
Deleted YSort doc.
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This makes font oversampling work out of the box, while also increasing
the supported character set's size. The default font is now larger
as well to better fit today's screen resolutions.
The OpenSans SemiBold font was chosen for two reasons:
- Small file size, yet its character set supports Latin-1 and Cyrillic
text.
- A heavier font weight looks better in most "game" scenarios and is
more readable against mixed-color backgrounds.
This is considered a breaking change as it changes the default font's
metrics, which will likely affect how Control nodes are laid out in
scenes (unless a custom font is in use).
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
Various fixes to UV2 unwrapping and the GPU lightmapper. Listed here for
context in case of git blame/bisect:
* Fix UV2 unwrapping on import, also cleaned up the unwrap cache code.
* Fix saving of RGBA images in EXR format.
* Fixes to the GPU lightmapper:
- Added padding between atlas elements, avoids bleeding.
- Remove old SDF generation code.
- Fix baked attenuation for Omni/Spot lights.
- Fix baking of material properties onto UV2 (wireframe was
wrongly used before).
- Disable statically baked lights for objects that have a
lightmap texture to avoid applying the same light twice.
- Fix lightmap pairing in RendererSceneCull.
- Fix UV2 array generated from `RenderingServer::mesh_surface_get_arrays()`.
- Port autoexposure fix for OIDN from 3.x.
- Save debug textures as EXR when using floating point format.
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
It existed in early Godot releases to allow working around hardware limitations
on max texture sizes (e.g. hardware limits of 1024x1024 pixels).
Nowadays the max texture size supported natively by Godot is 16384x16384, and
even low end mobile hardware should support at least 4096x4096.
The LargeTexture implementation is basically just an array with offsets, sizes
and textures and should be easy to replicate with a custom Texture resource if
needed - solving most of its bugs on the way as the implementation removed here
has various unimplemented or incomplete methods.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
* Particle shaders now have start() and process()
* Particle collision happens between them.
* The RESTART property is kept, so porting an old shader is still possible.
This fixes the problem of particle collisions not functioning on the first particle frame.
-Used a more consistent set of keywords for the shader
-Remove all harcoded entry points
-Re-wrote the GLSL shader parser, new system is more flexible. Allows any entry point organization.
-Entry point for sky shaders is now sky().
-Entry point for particle shaders is now process().
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
Helps a lot with soft bodies and generally useful to avoid shapes to go
through the ground in certain cases.
Added an option in ConcavePolygonShape to re-enable backface collision
on specific bodies if needed.
The problem happened when `ImageTexture::create_from_image` was called
with an empty image. In this situation an RID was allocated despite the
texture being null. The destructor would then crash trying to acess this
null texture.
Fixes#46274
benbot
Johan Aires Rastén
Yuri Sizov
smix8
Rémi Verschelde
FireForge
FireForge
Gilles Roudière
Yuri Rubinsky
Yuri Sizov
Micky
Rémi Verschelde
Vitika9
Patrick
Nathan Franke
Hugo Locurcio
Jonathan Nicholl
kobewi
Hendrik Brucker
bruvzg
clayjohn
Aaron Franke
Haoyu Qiu
Silc Renew
Pedro J. Estébanez
Rindbee
Josh Jones
Max Hilbrunner
Max Hilbrunner
RedMser
VolTer
danboo
Omar El Sheikh
QbieShay
hoontee
Raffaele Picca
golfinq
Zae
Antonio Dell'Annunziata
Juan Linietsky
ajreckof
DeeJayLSP
Fabio Alessandrelli
luz paz
SaracenOne
Fabian Keller
Dylan Conway
lawnjelly
MinusKube
Estelle Linkpy Reid
holgac
Raul Santos
JFonS
K. S. Ernest (iFire) Lee
tefusion
mightygoat
Lyuma
Kamay Xutax
Aaron Record
kleonc
SnailRhymer
Markus Sauermann
Michael Alexsander
nikitalita
Pawel Lampe
C.Even
Bastiaan Olij
TechnoPorg
jfons
Igor Kordiukiewicz
MisoMosiSpy
JoJoX
jmb462
Anilforextra
Paulb23
Omar Polo
Ansraer
rafallus
Brennen Green
Arnav Vijaywargiya
Bartłomiej T. Listwon
luz paz
David Cambré
laws65
Kodi
Marc Gilleron
Manolis Papadeas
Nathan Franke
PouleyKetchoupp
Danil Alexeev
Francois Belair
Nathan Lovato
Andrii Doroshenko (Xrayez)
Lenny Critchley
Brian Semrau
Manuel Dun
Marcel Admiraal
Murilo Gonçalves
Duroxxigar
Anutrix
Mark Riedesel
TwistedTwigleg
M. Huri
boruok
Metin Celik
Duarte David
Tom Coxon
Matthew Newall
gyroninja
Vincent
AndreaCatania
Ellen Poe
Wilson E. Alvarez
K. S. Ernest (iFire) Lee
John Wigg
requizm
Jihyun Yu
skysphr
Kevin Fischer
Umang Kalra
Morris Tabor
hpnrep6
Martin Krbila
George Marques
Moritz Kaltenbrunner
andriyDev
Joosep Jääger
Rafał Mikrut
Stefan Boronczyk
Kongfa Waroros
Juan Linietsky
fabriceci
CaptainProton42
Anshul7sp1
Pedro Rodrigues
sps1112