When there is no selection, the camera will center around the
world origin.
This helps people get back to the world center if they haven't added
any nodes yet.
(cherry picked from commit fc055e1993)
When ctrl-clicking in the code editor, the view will now be centered on the function result.
Also replaces a circumstance where goto_line_centered should be used.
(cherry picked from commit 2b775bd698)
- Display a specific error message if the project doesn't have an
`export_presets.cfg` file.
- Display a list of detected export presets if an invalid export
preset name is supplied.
(cherry picked from commit 09f38ea215)
During the development of 3.3, internationalization features were added to allow arbitrary bone and node names.
However, doing so will break all references and existing animation clips for projects upgraded from 3.2
This adds an import setting, enabled by default, but disabled for newly generated .import files which restores the old behavior.
This makes it possible to see whether a scrollbar grabber is at the top
or at the bottom of a scrollbar. Also, if a scrollable area is very
large, this makes it easier to notice that the area can be scrolled
(since the grabber is proportionally very small).
The scrollbar grabbers were also made thicker and slightly more opaque
for better visibility, especially in peripheral vision.
(cherry picked from commit b60b6ddba4)
Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
(cherry picked from commit 7ed2220928)
* Removes error shown when file is in 'keep' mode
* Display a warning when attempting to open the file
* Closes#47296
(cherry picked from commit 4706297356)
The new CollisionObject gizmo used for custom shapes was used with
higher priority due to alphabetical order and was preventing physical
bones from being displayed in the editor.
Keyframe times shift slowly in imported animations, starting with a zero shift
at the beginning and increasing and becoming erratic slowly farther into an
animation, reaching significant levels at times after about 3 minutes into an
animation. This commit fixes the issue by increasing the precision of the
floating point numbers used for keyframe time calculations. Only the most
significant cases that cause fast accumulation of errors over a short animation
duration are fixed. Other cases that would have a marginal benefit from
switching to double precision numbers are left for another PR/further analysis.
Note that this change has no impact on the runtime performance of games/apps
created using Godot. It only affects the GLTF importer.
Fixes#47127.
(cherry picked from commit 6770a9413b)
The changes made in this commit refresh the URL OptionButton when editor settings are modified.
No need to restart any more for the changes to appear in the Asset Library.
Fix#46977
(cherry picked from commit 6525d74623)
When creating a Windows folder via a Godot's dialog, the extra spaces are not removed which causes problems with Windows. We now remove leading and trailing whitespace when creating a dir.
(cherry picked from commit c8538153b0)
ALT key modifier was hardcoded is node_3d_editor_plugin.cpp and didn't take editor settings into account.
Fix#46973
(cherry picked from commit 31077d875e)
Fix#46961:
This commit correctly initialize capitalization in sub-inspectors (like shaders's sub-inspector in the inspector panel) with the editor settings.
(cherry picked from commit 281f5a4999)
Fixes crash that happened while exporting if zero files were selected
and adds more error handling to EditorExportPlatform class.
(cherry picked from commit 15656d4182)
With smaller arrays/dictionaries, this makes it possible to view all of
an array/dictionary's items on a single page.
Larger values could be used, but make switching between node selections
quite slow, especially on low-end CPUs. They could also be problematic
with complex resource inspectors for arrays/dictionaries that contain
Resources.
This closes https://github.com/godotengine/godot-proposals/issues/2058.
(cherry picked from commit d97d65b184)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
The font size of the Find in Files dialog used to get out of sync with
the code editor font size.
The font of the Find in Files dialog is now updated each time there is a
change to the theme. This way, the font size of the Find in Files
results changes in response to the code font size being changed using
Ctrl +/- or using the Editor Settings.
Fixes#35499
(cherry picked from commit 011fdece6d)
This hints the user that the project manager is currently busy
loading the project. This is important for the HTML5 editor as the
current feedback isn't very obvious.
This also removes the unused `_exit_dialog` function.
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
Enabling filtering and mipmaps on the editor fonts makes the text
look slightly better. While not as good as SDF-based fonts, it should be
more usable already.
This change impacts the visual script and visual shader editors.
This partially addresses #16220.
This commit adds a view-dependant fade to the 3D viewport grid. It fades out
at steep view angles to hide the solid regions that appear far from the camera.
I also included a fade to hide the grid borders.
I added some improvements to the dynamic grid when the camera is in orthogonal mode.
It properly handles zoom now, and the grid center is now set to the intersection point
between the grid plane and the camera forward ray, keeping the grid
always visible.
(cherry picked from commit 73e62dffb9)
Cinematic preview enables the Camera3D preview automatically.
When previewing a Camera3D, the rotation gizmo isn't displayed as
it can't be used.
(cherry picked from commit fa1d853eeb)
This affects the editor scale and font hinting settings which will now
display their automatically chosen value in parentheses.
(cherry picked from commit 57654508c9)
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
fix for issue #44282
AABB for collision geometry was being calculated based on parent nodes transform without consideration for collision geometries translation.
Also hopefully clarified logic for selecting starting point for ray cast
(cherry picked from commit 4f171afecc)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
We should first attempt loading as external files, thus creating a dependency.
Loading as a buffer should only be used as fallback to support manually loading
as PNG or JPEG depending on the defined mimeType.
Fixes#44309, was a regression from #42504.
(cherry picked from commit e268a8e523)
1. show valid directory path when opening editor file dialog
2. keep file name when changing path by entering path
3. add first extension in filter automatically if not given
4. remove directory in recent list if it's not valid anymore
(cherry picked from commit 1f4b1e1488)
The blue accent color is now used, which matches the default editor
accent color.
It doesn't change to match the currently configured accent color
automatically, but doing so would require modifying the CheckButton
class a lot for little benefit.
(cherry picked from commit 114c1a78d9)
- Brighten gizmos when highlighted to make the difference between a
non-highlighted and a highlighted gizmo more visible.
- Tweak the manipulator gizmo size property hint.
(cherry picked from commit 8522ac7711)
The code we had for PVRTexTool doesn't work as it's not compatible with current
PVRTexTool CLI options, and likely hasn't been for years.
Instead, we have our own vendored pvrtccompressor thirdparty library which all
users have thus de-facto been using. This commit moves the compress code to
`modules/pvr` where it belongs.
There's no proper compress function for PVRTC 2-bit format, that's a bug that
will need to be fixed (currently it's compressed as 4-bit format even if you
use Image::FORMAT_PVRTC2).
Fixes#28669.
(cherry picked from commit 1a31274855)
This partially reverts #44041.
Also fix the bogus label about lack of GLES3 support being always shown...
It was meant to be behind a check but I had left it out while testing, and
forgot to put it back.
fix for issue #44231: snap_selected_nodes_to_floor() results in an editor
crash when a child collisionshape has invalid shape object
(cherry picked from commit 52f6e0b5ad)
This only applies to the project manager instance, what driver is used is otherwise
still defined by the project settings for a running game/editor.
Should help users who have issues with buggy GLES3 drivers to still use the project
manager to create and edit GLES2 projects.
Now that the F1 key is available, we can bind Search Help to the key
generally used in other applications to open the help menu.
(cherry picked from commit 42685f514f)
This matches the 2D editor default behavior.
Powers of two are usually better for grid divisions as they are often
used in level design.
(cherry picked from commit 31cf3e2572)
image/gif is not supported in the glTF 2.0 specification,
these files are broken. But let's be lenient...
Fixes#43638.
(cherry picked from commit f70cc0a60e)
Export presets contains the export_path option, to specify the default
export location, but the CLI export option disregarded that, and always
required and export path to be specified.
After this commit, if the export path is not specified in the command,
the one in the preset will be used, erroring only if it's not present or
invalid.
(cherry picked from commit 032a1c5dc3)
Switching between editors now requires holding Ctrl to avoid
conflicts with the new F2 shortcut.
The asset library can now be accessed by pressing Ctrl + F4
on Windows and Linux, or Alt + 4 on macOS.
This partially addresses #38139.
(cherry picked from commit 79e4e26738)
This check was there since the first commit in 2014, but a later feature added in 2018
with #17717 did not properly update the code while adding non animation-related code
in `perform_node_renames`.
Fixes#40532.
(cherry picked from commit d107fd4c9e)
This also makes borders always display in the editor theme,
even if the editor scale is below 100%. Otherwise, "focus" outlines
would vanish when using an editor scale below 100%,
which harms usability.
- The grid is now infinite, it follows the camera.
- The grid is now dynamic, if you zoom in and out, the grid subdivides,
expands, and fades.
- You can now enable grid planes for the XY and YZ planes. Only the flat
XZ plane is enabled by default. Each plane is independently dynamic
of the others.
- The default grid size has been increased to 200, and the maximum
has been increased to 2000. At 1000, the grid mostly looks edgeless.
- If you set the division level max and min to the same value then
the grid does not expand or subdivide, but instead stays the same size
and just follows the camera. Also, if these values are the same,
the bias value does nothing.
- If you want to have Blender-like behavior, set max to 1, min to 0,
and set the bias to a really low value. You may also wish to increase
the grid size if you have a small bias.
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
- Draw two boxes slightly offset from each other to give the illustion
of a thicker outline.
- Decrease the offset compared to the 3D node's AABB to give a more
accurate representation of its size.
- Make the box fully visible instead of only displaying the corners.
- Draw a x-ray version of the box that's more translucent, but visible
through walls. This helps make the box more visible while still
having a sense of depth.
- Use an orange color similar to the 2D editor.
Undo/redo log messages will now specify the modified node's
name (or number of modified nodes if several were modified).
On top of that, the new position/rotation/scale/pivot offset
will also be mentioned in the message.
(cherry picked from commit 996740de43)
Hide the back sides of the rotation gizmo circles and add a white
outline for better visualization of the rotation "sphere".
This is a 3.2 backport of @JFons work on the master branch; all credit
goes to him.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
The editor used to only copy drag-dropped files in the File System pane
if the given file was a valid resource, or had a specific file format
(ttf, otf).
With this PR, all drag and dropped files are copied instead, no matter
their extension.
(cherry picked from commit 410b324740)
Treats application unfocus as a mouse release for
TOOL_PAINTING, by finishing the undo state and
resetting the tool. Also sets a flag to prevent extra
lines from being drawn when the application is refocused.
fixes#42398, fixes#24970
(cherry picked from commit 70a4cd1afe)
Batching is mostly separated into a common template which can be used with multiple backends (GLES2 and GLES3 here). Only necessary specifics are in the backend files.
Batching is extended to cover more primitives.
1. _gen_unique_bone_name(Ref<GLTFState> state, const GLTFSkeletonIndex skel_i, const String &p_name) won't return an empty string.
2. String GLTFDocument::_sanitize_bone_name(const String &name) will keep Japanese characters. Like: "全ての親".
3. The sanitize function allows the bone name to be not just alphanumeric. The only required conditions are the ones in add_bone.
> ERR_FAIL_COND(p_name == "" || p_name.find(":") != -1 || p_name.find("/") != -1);
(cherry picked from commit 7b76f8783f)
The glTF 2.0 spec only makes `mimeType` mandatory for `bufferView` image data,
so the previous logic to handle URIs with base64-encoded images could fail if
`mimeType` is undefined.
The logic was documented and refactored to better handle the spec, notably:
- `uri` and `bufferView` are now mutually exclusive, and only the latter fails
if `mimeType` is undefined.
- `uri` with a file path will now respect the `mimeType` if defined, and thus
attempt loading the file with the specified format (even if its extension is
not the one expected for this format). So we can support bad extensions (PNG
data with `.jpg` extension) or custom ones (PNG data in `.img` file for
example).
- `uri` with base64 encoded data will infer MIME type from `data:image/png` or
`data:image/jpeg` if it was not documented in `mimeType` initially.
- `uri` with base64 encoded data, no `mimeType` and `application/octet-stream`
or `application/gltf-buffer` will fall back to trying both PNG and JPEG
loaders.
Fully fixes#33796 (and fixes up #42501).
(cherry picked from commit 2e99d0b26f)
See https://github.com/KhronosGroup/glTF/issues/944 for context on the
application/gltf-buffer MIME type.
The glTF 2.0 spec supports `image/jpeg` and `image/png` which can also be
base64-encoded in buffer URIs.
Fixes#33796.
(cherry picked from commit 34a50310ad)
Entering text will now start searching automatically after 0.25 seconds
have passed (debounce delay).
This removes the need for a separate Search button.
(cherry picked from commit 6055db2a72)
- Make it possible to drag a negative easing or an easing of 0 back to
a positive value.
- Clamp the value between -1000000 and 1000000 to avoid issues
related to infinity.
- Display more decimals for numbers closer to 0, less for large numbers.
- Display trailing zeroes in decimals to avoid flickering when dragging.
This closes#18712 and closes#22079.
(cherry picked from commit 028de11db8)
We originally used `pt_PT` (i.e. Portuguese (Portugal)) to distinguish with
the Brazilian Portuguese variant `pt_BR`, as both are significantly different
and need separate translation files.
But Portugal's Portuguese (or "European Portuguese") is close to the variant
spoken and written in other Portuguese-speaking countries such as Angola and
Mozambique, so it makes sense for users of these countries to also have access
to the European Portuguese translation (at least until translators decide that
adding e.g. `pt_AO` and `pt_MZ` variants would make sense, taking into account
the translation effort that this duplication implies).
Godot's locale matching checks first for the full locale (e.g. `pt_AO`), and
if no translation is found, it checks for the non-regional language code
(`pt`), so this change enables translations for Portuguese speakers outside
Portugal and Brazil.
(cherry picked from commit 1e2f55e273)
Fixed issue where using arrows to change the selected tile would not reach all subtiles in an autotile, only going up to the second to last row and column.
- Use postfix notation for types in the method selector
(for consistency with the editor help).
- Perform a case-insensitive match and replace spaces with underscores
in the search string.
- Fix extraneous space after the `void` return type.
(cherry picked from commit 4390a9d628)
Use popup_dialog() instead of popup_centered() to show edit dialog/
With popup_centered it is not possible to change the displayed
signal name. When this is not set the previous shown name is show
for the current dialog.
This is no problem when creating a new conenction as popop_dialog
is used there and this would update the title.
Fixes#42074
(cherry picked from commit eeb6c2e22c)
Should fix#27009 where the DefaultProjectIcon was scaling
with the EDSCALE. Now it checks if the icon name is equal
to "DefaultProjectIcon" and sets the scale to 1.0 instead of
EDSCALE.
(cherry picked from commit 740100d671)
Patch for #21755. Node scaling arrows pointed the wrong way when nodes were rotated. Ammend: made math cleaner.
Simplified expression
Changes suggested by Aaron Franke
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
(cherry picked from commit 603febdbfe)
When changing the texture region for a StyleBox, the regions was not updating automatically in the Texture editor.
(cherry picked from commit 7d7727bade)
Fixes: #28683, #28621, #28596 and maybe others
For iOS we enable pvrtc feature by default for both GLES2/GLES3
Etc1 for iOS doesn't have any sense, so it disabled.
Fixed checks in export editor.
Fixed pvrtc ability detection in GLES2 driver.
Fixed pvrtc encoding procedure.
Fixes#34509 where the theme editor would push away the inspector
if something like "hseperation" is really high.
Now `set_enable_h_scroll` is true which fixes this.
(cherry picked from commit d602be077d)
By default 'add_ios_framework' would not embed a framework to save previous behavior.
New 'add_ios_embedded_framework' would embed framework on export.
New contributors added to AUTHORS:
@hinlopen, @naithar, @rrcore, @SkyLucilfer, @TwistedTwigleg
Thanks to all contributors and donors for making Godot possible!
---
Also changes to relevant code that parses the DONORS.md to match
the new tiers.
(cherry picked from commit d2d4c1c957)
Ensures that the editor preview when placing a tile on a TileMap takes
into account the transformation of the TileMap. Previously, only the
origin of the Tile was transformed, but not its orientation or
scaling.
(cherry picked from commit cf04aabef1)
Editor now changes a color in the inspector only when it is different
from the current one.
Solves fake unsaved changes in editor after using the ColorPicker.
Resolves: #40879
(cherry picked from commit f3626364fc)
This removes:
```
ERROR: get_breakpoints: Condition ' base.begins_with("local://")
```
while running a project with blank scripts caused by deleting
or moving, or built-in scripts which are not yet saved within a scene
on running a project.
(cherry picked from commit 1c70a33d9c)
Methods were being called with InputEventMouseMotion instead of InputEventPanGesture, and they were null.
Fixesgodotengine/godot#16181 on the master branch
(cherry picked from commit 394a7826be)
A static function is added to EditorNode which allows for filename
disambiguation given a list of filenames and the corresponding list of
absolute paths for those files. This function is then used to
disambiguate scene and script tabs in the editor.
(cherry picked from commit 4285211f40)
This means clicking on an EditorSpinSlider to edit its value will
no longer cause the number to be visually offset while it's
being edited.
(cherry picked from commit cc615fee5f)
This change avoids the editor to freeze for several seconds when a
project with lots of scripts is loaded in the editor.
It focuses on a few heavy operations previously executed on all
previously loaded scripts:
- Initialize script resource (script validation/parsing) only
on focus
- ScriptTextEditor: code editor and edit menu are added to the
scene only on focus
- Add to recent scripts only when opening new scripts
(load/save scene metadata)
`ConvexPolygonShape2D` and `ConcavePolygonShape2D` are only meant to be
used directly in code and not in the editor for physics-based use cases
specifically.
Developers are advised to use `CollisionPolygon2D` instead, which does
generate those shapes under the hood, handling polygon convexivity,
proper orientation etc.
(cherry picked from commit dc446203be)
Fix to ensure that undo/redo works when painting bones in the Polygon2D
UV editor. Previously, bone painting would continue silently in the
background, because a mouse click signalling the end of an edit would
not be appropriately dealt with.
(cherry picked from commit 6e60aa3876)
This fixes issue #39844, where the confirmation dialog when a user
attempts to close an unsaved script did not actually save it even after
clicking "Save."
(cherry picked from commit d2a5b92e9b)
This reverts commit 481dbceed0.
Current fuzzy search implementation results in too many
non-useful results.
Could be re-added after result sort/filter/score functionality
is added. See #30072 for example existing implementation.
Fixes: #39128
Reverts: #32043
Fixed format style conflicts:
editor/editor_help_search.cpp
(cherry picked from commit 55d706c352)
Ensures that closure of Polygon2D in the editor takes into account
Grid Snap if enabled. Does this by comparing the polygon start with
grid snap applied to mouse click location. Note: transformation is
applied in order to deal with different editor zoom levels.
(cherry picked from commit b8d55b244a)
The existing theme editor icon could be unintentionally set for any
global class with matching name (`Group` icon, `Group` class_name etc),
which would only show up in the "Create Dialog" context, but not the
scene tree dock.
This change prevents this behavior, and ensures that the icon can be
actually overidden by explicit icon path in `class_name`, if there's any
custom icon to begin with.
The correct built-in type's icon is fetched for child classes if there
are no custom icons detected throughout base classes as well, so it
isn't left empty for those cases.
(cherry picked from commit c177308f80)
`get_global_class_name` for `GDScriptLanguage` is slow because
it forces to parse an entire script each time. This patch ensures
that the icon is actually fetched from the EditorData where they
are loaded beforehand.
This change also makes the behavior consistent with the existing
`get_object_icon` method in EditorNode.
(cherry picked from commit 4a86e2bb76)
Modifies polygon auto-completion based on UV editor scale, in order
to enable finer grained control for the user. Enables selection of
points closer than the current threshold of 8 pixels.
(cherry picked from commit 69d0d89214)
Ensures that behavior when export_presets.cfg file is edited manually
while editor is running remains identical to before commit 44094b0.
(cherry picked from commit 4a7c19e719)
Ensures no error is issued when attempting to preview a resource that
may be scaled down to <1 pixel when resizing to fit the thumbnail.
(cherry picked from commit c7a8dc7bb9)
Occurred when selecting polygon collision mode, then drawing a single point, then selecting rectangle mode, and finally trying to select a rectangle.
(cherry picked from commit 7850d0316f)
Ensures that when the `Selection Only` option is selected, the Replace
tool replaces occurrences of the search phrase only within the selected
region, and in order of occurrence.
(cherry picked from commit 2be3a33cc3)
Now that the 3D editor grid is infinite and adjusts its step automatically,
this helps people get a better sense of scale when moving around in the
3D viewport.
This also fixes the indicator bar drawing on hiDPI displays.
(cherry picked from commit eaae50fe4a)
Reduce repeated iteration through the full text
when counting the number of occurrences of whole
words while searching a file in the editor.
(cherry picked from commit 2433287871)
Ensure that presets are updated with the latest files when
starting up or opening the Project Export dialog. Fixes the
error where Godot would attempt to export deleted files that
were previously selected.
(cherry picked from commit 44094b082d)
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
The crash happens further down when setting an invalid owner in
`Node::_set_owner_nocheck` but I couldn't figure out how to fix it.
But here the proper fix is to catch the invalid scene file early on
and fail loading it.
Part of #17372.
(cherry picked from commit c080ec5da2)
Avoid load_scene for built-in resources to make sure we don't
open a scene tab and prompt for model file editing.
Load scene as regular resource instead and store the reference to keep
the dependency until the remote inspector cache is cleared.
(cherry picked from commit 01802074a0)
This also changes how checkboxes are selected, which makes it possible
to click in the small area between two checkboxes and
still toggle a value successfully (which is arguably less frustrating).
(cherry picked from commit bbc435624f)
- properly visit power of 2 factors (50%, 100%, 200%...)
- index based zoom values to prevent floating point issues
- Fix 2d editor not able to reach min and max zoom values
(cherry picked from commit fea6ca20c9)
This was previously implemented in the GridMap editor. This makes
the same feature available in the TileMap editor.
(cherry picked from commit def2059d67)
- Make the Ignore button's position identical across all warnings
by moving it to the left.
- Change the Ignore button's text and color to make it more obvious
that it can be clicked.
- Use the editor font instead of the default project font to match
the rest of the editor.
(cherry picked from commit 0c0ee427d2)
This patch adds ability to include external, user-defined C++ modules
to be compiled as part of Godot via `custom_modules` build option
which can be passed to `scons`.
```
scons platform=x11 tools=yes custom_modules="../project/modules"
```
Features:
- detects all available modules under `custom_modules` directory the
same way as it does for built-in modules (not recursive);
- works with both relative and absolute paths on the filesystem;
- multiple search paths can be specified as a comma-separated list.
Module custom documentation and editor icons collection and generation
process is adapted to work with absolute paths needed by such modules.
Also fixed doctool bug mixing absolute and relative paths respectively.
Implementation details:
- `env.module_list` is a dictionary now, which holds both module name as
key and either a relative or absolute path to a module as a value.
- `methods.detect_modules` is run twice: once for built-in modules, and
second for external modules, all combined later.
- `methods.detect_modules` was not doing what it says on the tin. It is
split into `detect_modules` which collects a list of available modules
and `write_modules` which generates `register_types` sources for each.
- whether a module is built-in or external is distinguished by relative
or absolute paths respectively. `custom_modules` scons converter
ensures that the path is absolute even if relative path is supplied,
including expanding user paths and symbolic links.
- treats the parent directory as if it was Godot's base directory, so
that there's no need to change include paths in cases where custom
modules are included as dependencies in other modules.
(cherry picked from commit a96f0e98d7)
This option can be used to workaround various issues with stuff
not reloading properly when changes are made.
The option was renamed to clarify the fact that it actually
reloads the scene saved on the filesystem.
(cherry picked from commit 2962819d1c)
It made minor adjustments difficult as the camera moved every time
Align Transform With View was used.
This closes#36738.
(cherry picked from commit a636631e33)
The indexes for the ScriptEditorItemData entries were not getting
updated after sorting. This would cause a page to be open but with a
different tab selected. Whenever _update_script_names was called next,
it would correct this indexing. Now we correct it immediately following
the tab sort.
(cherry picked from commit fe53c1b0bd)
PR #30877 was bogus as it made a blend shape-specific code block apply
to everything but blend shapes (as it seemed not to work properly *for*
blend shapes).
The proper fix should thus be to simply remove the problematic
block (and thus cleanup unnecessary logic).
Fixes#32712.
(cherry picked from commit 0034c88c57)
hiding script's panel, helps some users to conserve more space for code text.
this fix remembers script's panel visibility state in project's metadata and restore it on editor start.
Thanks to this, users who never use it and are forced to close it each time editor starts, may close it just once and it will stay like this on next sessions until manually opened again.
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
This makes the script name appear before the scene file name,
which ensures it's always visible even if the list of scripts is too
narrow to display the full name.
This only impacts built-in scripts with custom resource names.
Unnamed resources will still use `<scene_file>::<id>` naming
in the list of scripts.
(cherry picked from commit e90beade15)
The Request Docs button is partly responsible for layout overflow
issues on narrow displays, such as #31133.
It also tended to attract spam and low-effort issues that were
difficult to act upon. A "Send Docs Feedback" menu option has been added
to replace it.
(cherry picked from commit 2f6f029a75)
Right now, games only work on devices when exported with FullAOT+Interpreter.
There are some issues left that need to addressed for FullAOT alone. Right now,
it's giving issues with the Godot.NativeCalls static constructor.
Fixes#18809.
The in-editor ortho camera used a far clipping plane of 8192 units, and was
placed 4096 units away from the camera cursor.
This was far enough to cause culling issues from floating point precision loss
on objects smaller than one unit.
This change modifies the near/far clipping planes of the ortho camera to use
those specified in the editor (and currently used by the perspective camera).
The frustum is still centered around the camera cursor location, as it was
before.
Changes made:
* Added dirty bit for SpatialEditorSelectedItem's last_xform
* SpatialEditorViewport checks that dirt bit too before skipping the selection
(cherry picked from commit 19825436d4)
Alignment of scene pixels on screen pixel ensure a crisp rendering of small features (such as text). Unfortunately, alignment of top left pixel on screen adds a lot of jittering when zooming at high zoom factor.
This change allow to snap the top left scene pixel on the closest screen pixel (not only the top-left most), and we do so only when the scale factor is an integer.
(cherry picked from commit 1c02906a6f)
The AABB for an empty Spatial has 0 size, since the stored and
compared Transform was scaled by the AABB size, it would completely
destroy the rotation information. If there is no rotation
information, the gizmo doesn't update when the rotation changes.
(cherry picked from commit a0af3094b4)
Fixed FileSystemDock's `file_removed` and `folder_removed` signals not being
emitted because the emitted was using the wrong signal name.
(cherry picked from commit fe0b783e70)
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
EditorData::undo_redo.add_do_property and EditorData::undo_redo.add_undo_property is used in EditorData::paste_object_params to implement this feature. It's action name is set to "Paste Params"
Changes made
* Removed the call for clearing the history on paste params case.
* Instead of directly setting the properties value, EditorData::undo_redo is used.
(cherry picked from commit f817ba8379)
Icons are no longer upsampled when using an integer editor scale.
This makes some icons slightly less crisp, but the icons themselves
can be adjusted to mitigate this. When using a non-integer editor
scale setting, upsampling is kept as it improves crispness in a
far more visible manner.
When upsampling is disabled, this speeds up the theme generation
by about 100 ms on average, making the project manager and editor
start slightly faster. This also speeds up switching between themes.
(cherry picked from commit 9e3393a624)
Previously, a change was missed if it happened while the scan was in progress and already past the affected location.
Also:
- Consider the scan changes thread on termination, in addition to the full scan one
- Add FS-reported hidden to the check for hidden by the editor file system
(cherry picked from commit 3017bdb7ce)
The new default keys were chosen to match common graphics editing
software. A modifier is no longer required to use the Select tool,
making it faster to use.
This closes#34170.
(cherry picked from commit 88213b54ba)
It was removed after the implementation of VHACD. Generating a single
shape can lead to better performance, so it may still be desired.
This also adds tooltips for several options in the Mesh menu.
This closes#35692.
(cherry picked from commit 90af009f2e)
- Use the editor-defined error, warning and success colors for
preview texts.
- Make the "Regular Expressions" option into a CheckButton
(as it does something as soon as it's toggled) and move it out
of the Advanced Options submenu.
- Make it clearer that the error message originates from an invalid
regular expression.
- Clarify what the number means in the regex error message.
- Tweak some strings' casing for consistency.
(cherry picked from commit ff135065f4)
- Refresh tha tab automatically when switching to it.
- Disable the Refresh button if no project is currently being debugged.
- Scale the column widths on hiDPI displays.
- Rename the tab from "Video Mem" to "Video RAM" for consistency.
(cherry picked from commit 8f838f33b7)
- Convert the default AutoLoad name to PascalCase when selecting a file.
- Disable the "Add" button if the path is empty or the name is invalid.
- Prefix the automatically-chosen name with "Global" if it would
conflict with a built-in class.
- Replace the FileList icon with the Load icon as it better represents
the action.
(cherry picked from commit 352be7dbcc)
Settings search used to work only on properties, so if a searchbox text
was a substring of a category but not of a property the whole category
would be filtered out and no property would be shown.
Now the behaviour is changed so that when the searchbox text is a
substring of a category all its properties are shown too.
The previous behaviour is still present so that in case the searchbox
text is both a substring of a category and a property of another
category, all properties of the first category are shown and only the
property of the second category is shown.
(cherry picked from commit 84410f937e)
Previously, the CSV file could only be saved in `res://`. Since this is
an editor tool, it makes sense to allow saving anywhere on
the filesystem.
(cherry picked from commit 81f33df84b)
We already removed it from the online docs with #35132.
Currently it can only be "Built-In Types" (Variant types) or "Core"
(everything else), which is of limited use.
We might also want to consider dropping it from `ClassDB` altogether
in Godot 4.0.
Whenever any node is renamed, EditorNode::_edit_current() is called and it resets plugins used for current edited properties. This change forces the inspector to update even though the same object is edited, to make sure all plugins are restored properly from unfolded properties/resources/etc.
Fixes#32832
Suppose that the user wants to use some guidelines in 2D mode. The
user has enabled "Use Pixel Snap", and configured the "Grid Step" to
1px.
On some zoom levels, when dragging the guidelines step by step, some
offsets shows the wrong value. The offsets that are wrong vary - it is
affected by the zoom level, so some zoom levels do not display this
problem.
For example, a user may see this while dragging the guideline:
0px 1px 1px 3px 4px 5px 5px 7px 8px
whereby 2px and 6px are missing.
This is due to a floating-point error. The values are printed as
(truncated) integers, but they are actually decimals, so they were
actually 1.9999 and 5.9999 for the missing cases.
Let's fix that by rounding up the values before printing them to get rid
of the errors.
This fixes#35010.
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
Now that projects are loaded asynchronously, some projects in the
list may be displayed before their icon is done loading. This is
especially common on slower hardware.
In such cases, this makes the project manager display a loading
placeholder instead of the default project icon.
This prevents the editor theme from being created twice.
This speeds up the project editor and editor startup
significantly; startup is now 1.3 times faster on average
(tested on a debug build). RAM usage was also lowered by 7.5 MB
on average.
This partially addresses #35321.
Tab characters were not rendered properly in the breakpoints and
bookmarks lists of the script editor if the bookmarked line was a
comment, resulting in unknown ASCII symbols “�”.
Fixes#34046.
Also changed formatting a bit to enclose the code in backticks (like in
Markdown) instead of quotes.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
It should not be possible to click the "Connect" button unless
- a node is selected, and
- that node is valid in the current mode.
The modes are the default and advanced modes which allow connecting to scripts
and nodes respectively.
Currently the connection dialog is closed when
1. no method name is specified, or
2. no script is attached and if the method name isn't a buildin.
That's really annoying.
- Drop the "Brief description" header as it became redundant
with this change.
- Fix a bug in the editor help where an extraneous newline was added
after the header if the class isn't inherited by any others.
- Remove the Category line in the rST markup as it's not useful
for API users.
Normally it wouldn't be possible to click on the "Connect" button if no node
is selected, because the button would be disabled.
However, double clicking on a node is also hooked up to the same signal
and double clicking is possible even if the "Connect" button is disabled.
This caused a crash described in #34555.
The crosshair makes freelook navigation a bit easier, while making it
clearer that it's possible to select nodes by clicking while in
freelook mode.
The crosshair is only displayed while in freelook mode.
It uses an icon designed to be visible on any background.
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
This seems to have been left dangling during 3.0 development and was
never finished.
Hiding for now until it can be completed, otherwise we'll have to drop
it.
See #22394.
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
The zoom level displayed is now relative to the editor scale.
This means that with an editor scale of 200%, the 100% zoom level
will actually be 200% as it's multiplied by the editor scale.
This prevents things from looking too small when opening a project
on an hiDPI display.
This matches the behavior found in most image editors out there.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
* "Add" button text in Groups Editor
* "Receiver Method" in Connect Signal Dialog
* "Play Mode" in Animation State Machine Editor
* "Mesh Library" button text in Mesh Library editor plugin
* Compose Array node button texts in Visual Script
* Various button texts in TileSet Editor
* Various Run Script errors
Before this fix, opening relative export paths inside of an EditorFileDialog was not possible. This was fixed by modifying String::path_to_file() to save relative paths in EditorExportPreset::set_export_path() more appropriately and changing EditorFileDialog::set_current_dir() to open relative paths.
Also, match multi-line delete behavior in script with single line:
If there are four lines: A, B, C, D.
Before the change:
Delete C: Cursor lands on D
Delete B and C: Cursor lands on A
After the change:
Delete C: Cursor lands on D
Delete B and C: Cursor lands on D
This was caused by the fact that the points were being iterated sequentially and we were breaking out of the loop as soon as we found a point that was "close enough", rather than actually finding the closest point. The previous fix exposed this new issue.
Case 1: start and stop an animation in the inspector
Case 2: start an animation in the inspector, then stop and start again in the track editor
Fixes#34021
An error was systematically triggered on the root bone, when trying to access its parent (the return value wasn't used in this case anyway).
Fixes#23920
This wasn't a very good idea as it puts too strict requirements on how
to set `min` and `max` values. For example, since the default min and
max are 0 and 100, this triggers an error:
```
set_min(256)
set_max(16384)
```
Since `min` will be higher than `max` temporarily. It can be worked
around by setting max first, but it's not really intuitive. I'll relax
the requirement as it's only a problem in `get_as_ratio`, which already
has a check.
Fix another min == max occurrence.
It will now raise an error whenever this happens so that we can fix
these situations. `max == min` is not allowed as it could lead to
divisions by zero in ratios, and `max < min` doesn't make much sense.
Fixes#33907.
- Fixed "Previous Script" shortcut not working (CTRL+SHIFT+<)
- Fixed crash (integer division by zero) when using previous/next script shortcut with no script open
- Fixed error when dropping a script file with no script open
ERROR: ItemList::get_item_metadata: Index p_idx=-1 out of size (items.size()=0)
At: scene\gui\item_list.cpp:257
This change allows StyleBox preview to take shadows and content margins into account to display how a whole panel would be rendered.
The preview control clips contents so that in any case it doesn't bleed on controls around.
Fixes#33801
Changed to MarginContainer to enforce debugger tabs minimum size on the parent, avoids overlapping controls with Profiler and Network Profiler tabs.
Fixes#20837
This makes it easier to navigate in 3D when using a graphics tablet.
This fallback modifier will only be available if no other modifier
is using Alt.
This partially addresses
https://github.com/godotengine/godot-proposals/issues/196.
Makes behavior consistent with selecting/deselecting single nodes and fixes a regression about the focused node being lost when multi-selecting.
Fixes#33332
This can happen if users somehow got wrong user permissions assigned to
their Godot cache, config or data paths (e.g. `~/.config/godot`).
The error messages should give them a hint as to what the issue may be.
Fixes#33199.
There may be other situations that still lead to a crash, we need to
review all uses of `FileAccess::open` with `FileAccess::WRITE` mode to
ensure that proper pointer validation is done.
A "primary" line is drawn every 8 steps by default,
which makes it easier to measure distances for snapping.
This value can be configured in the Configure Snap dialog.
The previous code didn't take into account that templates directories
can have subdirectories like the mono templates have.
Also fix an unclosed dir handle.
As a result of commit b49226e085 FileAccess::open no longer returns ERR_CANT_OPEN if the file cannot be found/opened.
Instead check against ERR_FILE_NOT_FOUND or ERR_FILE_CANT_OPEN.
EditorNode was not correctly setting the class memeber when creating the
theme, using a local variable instead.
Theme is now created before registering exporters (as they might need it).
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
This makes precise adjustments easier, without having to
touch the mouse wheel. This modifier is also available in
Blender, so this makes the freelook behavior more consistent
with it :)
In the interest of simplifying the Editor Settings, this also
removes the freelook modifier speed factor setting
(the value is now hardcoded to its default).
When using the built-in docs, Godot would not support the shortcut "Shift + F3"
to search for the previous occurrence of the search entry text, thus causing an
inconsistent behaviour when using shortcuts in the "ScriptEditor" compared to
using them in the "ScriptTextEditor".
The previous parameter of the function "EditorHelp::_search()" in the class
"editor_help" seems to be unused, thus replaced with a bool representing to
search for previous search entry text or not. By adding the shortcut to
Godot's "ScriptEditor", this commit now improves Godot's consistensy when
using shortcuts.
Fixes#31147.
Co-Authored-By: Oscar Ferm <oscfer-6@student.ltu.se>
- Add or remove the necessary subdirectorires to the includes to remove
dependency on the editor directory being in the build's include path.
- Ensure includes in modified files conform to style guideline.
- Remove editor from the build include path.
Removed default shortcut because of the conflict mentioned in the issue.
Command + Shift + T would conflict with Soft Reload Script,
and this shortcut doesn't seem to be needed very often.
- No reduced Rect in march square algorithm, it was causing inconsistent cases near the borders and made the outline less accurate
- Ignore invalid generated polygons (under 3 points) to avoid unnecessary errors and crashes
- Error popup only when no polygon could be generated at all
- Added option to shrink pixels (to get rid of small separate islands)
- Fixed polygon preview (lines were sometimes not showing along the borders)
Fixes#32564, #29267
This makes third-party license texts display without any soft
wrapping.
The About dialog still fits in the editor when using the smallest
window size permitted (1024x600).
Previously, the ordering did not match.
This could be improved by doing the filtering behorehand, then we simply access them.
This will make sure that future changes to one is reflected to the other (because we are only doing it once)
Hugo Locurcio
kobewi
Kyle
Shatur95
Ev1lbl0w
Nathan Franke
Lightning_A
Sushi
Rémi Verschelde
Bhuvan Vemula
Rémi Verschelde
Lyuma
kleonc
Yuri Roubinsky
Aaron Franke
Haoyu Qiu
Morris Tabor
Yuri Sizov
megalobyte
AndreaCatania
nathanwfranke
Juan Linietsky
PouleyKetchoupp
Dominik 'dreamsComeTrue' Jasiński
Alex Hirsch
andybarcia
ArdaE
K. S. Ernest (iFire) Lee
bruvzg
jmb462
ray90514
Pop0p
mujpao
abaire
Rafał Mikrut
nemerle
gatalskii
Pedro J. Estébanez
Danil Alexeev
hilfazer
Michael Alexsander
trollodel
Fredia Huya-Kouadio
Borislav Kosharov
Hein-Pieter van Braam
hoontee
Ansraer
Andrii Doroshenko (Xrayez)
Marcel Admiraal
Tom Langwaldt
Fabio Alessandrelli
Kanabenki
jfons
gongpha
Maganty Rushyendra
Addmix
Dodoveloper
ArrowInAKnee
Filip
dankan1890
Fabian Stiewitz
Eric M
jeffuntildeath
Leleat
volzhs
janglee
Marcus Brummer
Adam Scott
Nick Swoboda
David Kennedy
GryphonClaw
Eric Tuvesson
willnationsdev
David Sichma
Pleto
Gabriel Van Eyck
Michael Auderer
lawnjelly
Ryan Roden-Corrent
Gilles Roudière
Nehluxhes
andriyDev
Gustav
kurinoku
booer
Spencer Burris
Dashcell
Melvin Louwerse
Lunatoid
SekoiaTree
Zak
Vasiliy Makarov
Adrien
Haz
SkyJJ
Rafał Mikrut
Sergey Minakov
Antoine Félix
totlmstr
Andy Maloney
Paulb23
Stijn Hinlopen
rileylyman
Jitesh
Zae
coldragon
Chistpohe LY
Daniel Ting
Yuri Sizov
follower
lordkettune
Bill
Vorblen
Sl3dge78
Bojidar Marinov
SaviHex
Phischermen
johan
Alex Bustin
Paul Joannon
Eduardo Nunes Pereira
Thakee Nathees
mashumafi
MrRevington
Tom Evans
Shivansh Anand
Avril
Kiri Jolly
Vasiliy
Ignacio Etcheverry
Ivan.Shakhov
simpuid
alvaroHernandez
fhuya
Richard Menzies
Eric Rybicki
gururise
Silvano Cerza
Tan Wang Leng
William Tumeo
RaphaelHunter
N0hbdy
Lakshay Angrish
andrycodestuffs
asynts
Bastiaan Olij
PucklaMotzer09
veryprofessionaldodo
Joost Heitbrink
xelivous
Marc Gilleron
Marios Staikopoulos
Catchawink
Hannah Crawford
Norton Corbett
merumelu
codecustard
checkerWoho
MCrafterzz
Edi Cikovic
conankzhang
Mikolaj Kaczmarek
Thomas Ebert Hansen
Erik
Anubhab Ghosh
AJ Weeks
Mark Riedesel
Jairo Honorio
RobKohr
lupoDharkael
Marqus
Pedro Ciambra
Joe Morton
Osama El Hariri
Hanif Bin Ariffin
Relintai